Sök:

Sökresultat:

763 Uppsatser om Soil carbon - Sida 6 av 51

Grundvattensänkning till följd av järnvägstunnel genom Hallandsås : miljökonsekvenser relaterade till förändrad kväveomsättning i mark

This thesis was carried out to give some background information to a report of SLU (Swedish University of Agricultural Sciences) for the Swedish National Rail Administration (Banverket). The requested information was to provide basic data for an environmental impact assessment of the construction of the tunnel through Hallandsås. The aim with the thesis work was to discuss and quantify the leaching of nitrate and the emission of nitrous oxide from the soil at the groundwater level established through the tunnel project. The nitrogen related processes that could be affected were described and discussed. The different areas where a decreased groundwater level can cause changes in the nitrogen processes are the wet and moist areas.

Koldioxidlagring - realitet eller utopi? : En komparativ fallstudie med syfte att undersöka potentialen för koldioxidlagring i geologiska formationer och biologiska sänkor och dess förmåga att bidra till hållbar utveckling

To curb greenhouse gases and mitigate climate change is one of the biggest challenges human society face today. Carbon dioxide (CO2) has accumulated rapidly in the atmosphere as a consequence of burning of fossil fuels and deforestation. The aim of this study is to explore two methods to store carbon dioxide in geological formations and biological sinks. The aim is also to discuss the two mitigation options from a sustainable perspective and whether it can lead to a better environment and benefits for local and global societies. The research questions are: Which method to store carbon dioxide, geological or biological, is the most effective? Which method to store carbon dioxide, geological or biological, has the greatest potential to promote sustainable development for local communities?The method used is a comparative case study and presents four case studies that explore the potential for CO2 storage offshore in Norway and Brazil; and in tropical forests in Mexico and Brazil.

Sönderdelning av plogtilta med skärknivar :

During the last couple of years it has been more important to reduce the driving on the field to prepair the soil after ploughing. The machine costs are high so it is necessary to be effective. To reach a pleasant soilbed directly after ploughing is sometimes possible on easier soils but heavier clay soils always need more tillages. There is a lot of equipment mounted on the ploughs on the market, for example Furrow Cracker and Furrow presses, which makes a pleasant soilbed on easier soils. The last year Överum and Kverneland have presented knives which are mounted on the wing or moulboard.

Sjunkande pH i Västerbottens humuslager : en kvantitativ analys

Acidification is a central concept in the environmental debate. The effect of acidification of the soil is a matter of a decreasing amount of cations and thereby a decreasing ability to resist a supply of hydrogen ions to the soil. Acidification has gradually increased in the O horizon in Västerbotten over a 30-year period from the 1970th to the 1990th. The aim of this study was from inventories of The Swedish National Forest Soil Survey and The Swedish National Forest Inventory explain and quantify the acidification that has occurred in the O horizon of two regions in the north of Sweden. Data from SMHI, The Swedish Meteorological and Hydrological Institute, has also been used.

3D-visualisering i markprojekteringsprocessen

The thesis has been made for NCC Teknik in Gothenburg. The NCC Corporation is one of the largest leading companies in Scandinavia within the construction industry. NCC is active throughout the whole construction process, where one part is to carry out soil investigations prior the construction of various buildings, for example residential buildings. NCC Technology wants to visualize the samples taken at the construction sites in 3D for clients, authorities and also internally to show in a simple and understandable way how contamination is spread out in the soil.The thesis includes the area of Limhamns läge in Malmö, previously an industrial area. The area has previously included a concrete factory and the contamination from that factory has lingered in the soil.

Autumn water sources for understory vegetation and fungi in a boreal forest : an evaluation using stable isotopes

Understory vegetation and fungi are regarded as important ecological drivers of processes like productivity and nutrient cycling in boreal forests. Whilst those processes are linked to soil water content, relatively little is known about the sources of soil water for these forest components. During early autumn in boreal forests, temperature falls and large events of rain are frequent which may influence soil water availability. To better understand the autumn plant-soil-fungi water relationships in this ecosystem, I used stable isotopes techniques in this study to examine the water sources for ericaceous shrubs and fungi in a Scots pine forest following a large, early autumn rain event. I hypothesize that ericaceous shrubs of two functional groups (evergreen vs.

Kväveomsättning i gräsmark med olika artantal och artsammansättningar :

This study was carried out at the Swedish University of Agricultural Sciences, Dept. of Agricultural Research for Northern Sweden. The aim of the study was to determine how plant species richness and diversity influence the nitrogen pools and nitrogen fluxes in the soil. Plant and soil samples from a biodiversity experiment in grasslands were used. Thirty plots with 12 grassland plant species (legumes, grasses, and non-legume herbs), combined from 1-12 species were investigated.

Rekonstruktion av jordartsförhållanden i Ingarvet, Falun, från geotekniska rapporter

The Falun area has been undergoing mining activity for a very long time and miningslag piled up and was used as foundations for building houses and roads, Ingarvetstarted expanding in the 1970s to an industrial area. The main goal for this report is toreconstruct a soil map of how the landscape was before anthropogenic effects. With thehelp of ArcGIS and geotechnical reports a soil map for parts of Ingarvet, Falun werecreated..

ALK?RR - K?LLA ELLER S?NKA F?R V?XTHUSGASERNA METAN OCH LUSTGAS? Empirisk studie av v?xthusgasutbyte i kustn?ra alk?rr p? den svenska V?stkusten.

Due to global climate change and the rising levels of greenhouse gases (GHG) in the atmosphere, the interest for seeking solutions for mitigation has increased. While much attention has been directed towards technical solutions such as carbon capture and storage (CCS), biogenic carbon sinks has also garnered significant attention. Previous studies have shown that coastal ecosystems such as seagrass meadows and mangroves have a much greater capacity for storing carbon (C) compared to terrestrial ecosystems. That raises the question if other coastal ecosystems, such as coastal wetland forests, that previously haven?t been considered as blue carbon habitats also contribute to coastal carbon sink capacity.

Uppgradering av biogas med aska från trädbränslen

The Swedish production of biogas was 1,5 TWh 2011. About half of the production was used as vehicle fuels. The cost for upgrading biogas depends on the size of the biogas plant and its gas production. If the gas flow is low the cost will be high. However, further development of existing upgrading technologies or development of new ones, have good potential to decrease the upgrading cost for small scale biogas plants.

Dimensionering av betongplatta på lös undergrund. En jämförelse mellan tre beräkningsprogram

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Källor i Lagga, en uppländsk slättbygd : Geografisk och geologisk påverkan påkällvattens egenskaper

For centuries, springs have played a significant role in our society as water supplies, reasons for where to settle down, and in folklore. There are different reasons why and where a spring forms, e.g. in what kind of soil it has its outflow. Geographic and geochemical surroundings have an influence on spring-water quality.For this project some of the springs in the Lagga perish, Knivsta municipality, Sweden, were selected for a closer study. Water samples were collected from springs for analysis.

Industriellt byggande – en nulägesrapport

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Carbon Critical Masterplanning tool : klimatpåverkan från samhällsplaneringsprojekt

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area. The results show that use of locally installed renewable energy sources can reduce the total climate impact when life cycle perspective is applied.

Produktivitet vid stubbskörd :

Stump harvest could be found in the late 1970?s and the early 1980?s. And now when the prices on energy are high it has become an interesting topic again. This work has been conducted within Holmen Skog?s stump harvest testing in Norrköping.

<- Föregående sida 6 Nästa sida ->