To save energy it?s popular to build houses with low energy loss. In these houses the walls are keeping a lower temperature in the external side which leads to a higher relative humidity. In addition more material, such as wood studs, are used which means that there is more moisture to dry. More moisture in combination with higher relative humidity may pose a higher risk of microbial growth.

The aim of the study was to distinguish if there was a difference between how work is perceived and how unemployed are viewed by people in collectivistic and individualistic cultures. A phenomenological approach was used in order to capture the participants life-worlds and their meaning constitution of a phenomenon, in this case the meaning of work and how unemployed are viewed. Subjects from different parts of the world, belonging to either a collectivistic or individualistic culture, participated in this study. Data was collected by self-reports which were analyzed by the method of MCA (Meaning Constitution Analysis) and the software Minerva. The results indicated that there were differences in how individuals from collectivistic cultures compared to individuals from individualistic cultures reflected about the meaning of work.

Den här rapporten är ett resultat av ett kandidatarbete på 20-poäng. Projektet som rapporten handlar om, beskriver hur utvecklingen av ett webbutikssystem åt ett flertal företag gått till. De har i sin tur köpt webbsystemet från företaget Opti Use som givit oss uppgiften. I rapporten diskuteras hur utvecklingsprocessen gått till och hur ett arbete med ett befintligt system upplevts. Rapporten beskriver även hur lösningen på uppgiften har tagit form och hur utvecklingsprocessen påverkat den.

The purpose of this study was to investigate the possibility of streamlining the test process by utilizing pair programming. During the process, pair programming has been practiced as is defined by the Extreme programming (XP) software development methodology, with the other aspects of XP discarded. The focus of the testing itself has been toward unit testing. The methods applied has been with an experimental approach where 93 cases were attempted to be solved by either single programmers or pair programmers. What has been investigated in these experiments was the time needed to complete a case, how many test attempts were needed to solve the case, and how high a percentage of the cases were solved.

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

This paper aim to present a model for evaluating what we choose to call HTML-frameworks, a framework that contains a set of CSS layouts and occasionally JavaScript support, based on the characteristics of the software quality standard ISO/IEC 9126-1. The methods used to produce this model is based on a field study that involved making a web portal with the help of a HTML-framework, some relevant literature and an analysis of the framework based on the characteristics of the ISO/IEC 9126-1 standard. The result was a model based on twelve different characteristics; functionality, web browser compatibility, collaborative skills, user-friendliness, documentation, visuals, graphic layout, performance, activity, professional support, replaceability and license. This model should be viewed upon as a suggestion to what a model for choosing HTML-framework could look like, because we haven?t had the time to test it in a real situation, so further studies are needed, and we believe there could be improvements made in the objectivity of the assessments of the characteristics..

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

Through a case study, I wanted to find out what advantages and disadvantages local companies consider with scrum and what they think about its future. To find out what scrum is, I read the literature and scientific articles and then wrote surveys based on my thoughts. Further, I also wanted to find out if it?s possible to use scrum in a school environment and therefore I visited a high school class who used scrum in one of their projects. The result was good but could have been better as it requires more training of scrum to understand everything.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.

The author of this report has created a Web-based invoice system and CRM at therequest of the company Webhouse.se. The purpose of the System is to makeeveryday tasks in the company easier. The system also needed to prevent mistakesand errors by managing orders and invoices.The system has been created with the company?s requests in focus. During thedevelopment of the system information security and interaction design have beenimportant aspects that have been taken into consideration.The system has been created using techniques such as PHP and MYSQL.

This essay is written at the university of Linköping and is a part of the teachers education. The intire essay is available on CD-rom. Its content is directed towards teachers who entirely or partly works, or want to work, in computereducation. The CD-rom contains both textmaterial and presentations, with teacherinstructions, wich are directly appliable in teaching computers. The teachingmaterial on the CD-rom is based on an empiric survey with different computerteachers.

The problem presented in this report is that of finding a method to calculate the lift force from a single-element airfoil of arbitrary shape. A number of restrictions are used in order to simplify calculations while retaining reasonable accuracy. The problem is solved for the two-dimensional case only and no finite-wing effects are taken into account. Furthermore, inviscid and incompressible flow is assumed. The method used to solve the problem is the vortex panel method, with vortex singularities distributed over simplified airfoil geometry.

This thesis presents my work at the company Fatshark AB in Stockholm. My supervisor Rikard Blomberg, who works as a chief technology officer at Fatshark and is one of the owners of the company, explained that they had experienced weaknesses in the methodology used when developing heads up displays (HUD) for their games. In the latest production, Lead  and Gold, the HUD had been redesigned a number of times, becoming an unnecessarily big expense due to the number of work hours invested. In modern software development, an iterative workflow is commonly encouraged. Despite this fact, the work efficiency could likely be increased by setting up guidelines as a help in the process of developing HUDs and reviewing the solutions.

The aim of this study was to determine a method to habituate treadmill-naive Labrador Retrievers to walk and trot on a treadmill. 17 Labradors was equipped with reflective markers glued to the skin. Their motions were captured with six 240 Hz infra-red cameras as they walked and trotted on a treadmill three times a day for two days. Also the heart-rate was recorded. We then used QTM and custom built software to analyze the measurements.

This report discusses the constructionof different types of exterior wallconstructions and analyses wall layers.Standard wall constructions from theSwedish building contractors NCC andSkanska and also from the materialproducer Isover have been chosen for theresearch. Life cycle cost analysis hasbeen made to conclude the mostprofitable wall type, seen from asustainable and economic perspective.The calculations have been made for aperiod of 50 years.The report shows that building with wellinsulated walls is a more profitablesolution both economically and whatconcerns sustainability even though thehigher investment. However, when wallssimilar insulation properties are beingcompared, the study proves that lowerinvestment cost is more profitable.The report introduces requiredconstruction techniques of walls inorder that the reader should understandwall constructions with different layersand properties. The essay shows theimportance of properly constructed wallsto avoid air leakage and moisturedamage.The essay has been implemented byliterature studies, contacts with NCCand Skanska and by energy calculationsmade by hand and using the software VIPEnergy..