Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a test method called TMap (Test Management approach) that can be used for structured testing of information systems.

The purpose of this thesis is to evaluate and update load curves for Fortum Distribution AB. Theload curve method is a tool used to forecast the strain of an electric grid. The method is based oncustomer annual energy consumption, outdoors temperature as well as customer category. Theload curve method was established by Svenska Elverksföreningen at the start of the nineties andfocus was put on standardizing annual energyconsumption, in order to make the method usableacross the nation. Present consumption patterns have changed since the original load curves wereproduced, which leads to a need to update the load curves.The work began with an update of present load curves according to recommendation taken fromanother earlier thesis.

The purpose of this thesis is to investigate how Digital Signage systems such as public info kiosks can be designed to better fulfill its main use; to enlighten, encourage and influence the public with information. The challenges presented from earlier studies shows that the public interests and goals, together with proper and relevant content displayed in info kiosks have impact on the attention the public have towards public displays. Qualitative methods such as interviews, usability testing and observations were conducted to further examine how a public info kiosk can be designed to draw attention and grow interest amongst students at K3, Malmo University. Usability testing were used on the digital prototypes that were developed to ensure that the gestural user interface meet the requirements of a proper interaction from the users. Important insights were made concerning; the attention and interest to relevant content, the aspects of the gestural user interface along with the placement of the info kiosk in terms of context.

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

Detta arbete har utförts under 10 veckor och har resulterat i en gemensam digital karta över Falun, Borlänge och Säters kommun. För att lyckas komma fram till resultatet har jag utfört en rad analyser av ingående data, och likriktat data så att framställandet av en gemensam karta blivit möjligt. Arbetet har varit indelat i två delar, insamling och likriktning av data samt kartografisk anpassning av data. Den första delen av examensarbetet har tagit upp den största delen av tiden, medan betydligt mindre tid lagts på den kartografiska anpassningen. Data som använts har samlats in från kommunernas primärkartor, Lantmäteriets fastighetskarta samt Vägverkets Nationella vägdatabas (NVDB).

Cloud computing is a new buzzword within the IT-industry, and introduces a whole new way of working with IT. The technique delivers web based services, which results in that the user no longer needs to install an application locally on a computer. Since the application no longer needs to run on a local entity, but in a datacenter located on a service provider, the users no longer need any specific hardware more than a computer with an internet connection. Cloud computing also offers IT-infrastructure and development environments as services, these three service types is better known as cloud services. Through the usage of different types of cloud services, the need for maintenance and hardware is significantly reduced.

Den explosivt ökande mängden information som finns tillgänglig på Internet har även sina avigsidor. Att hitta meningsfull information och kunskap på Internet idag blir allt svårare. Behovet av verktyg som kan hjälpa individer och företag att ta fram värdefull information, speciellt tidskritisk sådan på ett effektivt sätt, är och kommer att bli mycket stort. Likaså kommer behovet av att komma åt denna information, oberoende av tid och plats att vara stort och bli allt större i takt med den ständigt accelererande utvecklingstakten. Vi har försökt att belysa hypotesens komplexitet och visa på det faktum att inte bara en utan många beståndsdelar spelar in vid skapandet av en personanpassad informationsportal. Arbetet har grundat sig på att identifiera de krav som skulle kunna ställas på grundläggande funktioner.

Sysmex XE-5000 är en automatiserad cellräknare som utför mätningar enligt olika mätprinciper, de två som tillämpats i projektet är RF/DC(Radio Frequency/Direct Current) samt Flödescytometri med halvledarlaser. RF/DC bygger på förändringar i radiofrekventa resistansen och likspänningsresistansen. Förändringar i den radiofrekventa resistansen (RF) ger information om densiteten i cellernas inre (exempelvis kärnans storlek) och förändringar i likspänningsresistensen (DC) ger information om blodcellernas storlek. Flödescytometri definierar ett mått på cellers fysiologiska och kemiska egenskaper. Detektion av cellerna sker genom att de bestrålas med en laserstråle samtidigt som de passerar en och en i instrumentet. Informationen som fås ut från flödescytometri inkluderar spritt ljus och fluorescens.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

This study examines the background and nature of the credit default index swaption (CDIS) and presentsrelevant methods for modelling credit risk. A CDIS is a credit derivative contract that gives the buyerright to enter into a credit default index swap (CDS index) contract at a given point in time. ACDS index, in turn, is a multi-name credit default swap (CDS). Within the eld of research, thisthesis identi es the CDIS pricing models presented by Jackson (2005), Rutkowski & Armstrong (2009)and Morini & Brigo (2011) as the most recognized and developed. These models are evaluated byreconstruction in a numerical software environment.

Webbaserade informationssystem är idag en vanlig metod för företag att effektivisera sin verksamhet. Genom att använda sig av webbapplikationer så som web-services, kan resurser och data enkelt delas inom företaget på lokal och även global nivå över internet, genom att dessa resurser och data hämtas via web-servicen från centrala databaser. Examensarbetet utfördes hos Syntronic Software Innovations (SSI) i Gävle och det är utifrån deras specifikationer och krav som systemet har utvecklats. Denna uppsats redogör för hur ett sådant webbsystem kan utvecklas, samt vilka tekniker och verktyg som finns tillgängliga idag lämpar sig bäst för ändamålet. För att kunna svara på dessa frågor kommer forskningsmetoden design science att användas.

The Functional Resonance Accident Model is a method developed to analyze complex systems for the purpose of accident prevention. In FRAM-analysis a visualization of the complex system is created as an aid for identifying points of interaction in the system where the risk of accidents is high, and to determine where preventive measures are to be placed. FRAM Visualizer is a computer program developed as a tool for creating such visualizations.Many usability problems have been identified in FRAM visualizations created both manually according to established method and by using the FRAM Visualizer software. The purpose of this paper is to give a basis for how FRAM visualizations can be improved in accordance with usability criteria for use in future qualitative studies.The author suggests alterations to the FRAM visualization to resolve usability issues identified in previous articles and to achieve usability goals derived from visual communication theory. The design process is guided by established design principles.

The most common types of smartphones in Sweden are iPhone and Android. Development in the IT feld is constantly changing and Windows Phone is a new operating system that has been introduced on the Swedish market in 2010. However, Windows Phone user interface is quite different from iPhone and Android.The numbers of applications for smartphones are increasing, and users are making greater demands on better  usability. Users want the application to be easy to understand and fast to bring into play.  If the application contains a bug or has other user problems, it can ruin the entire experience. If the user does not have a good experience of the application, the user will quickly stop using the application.Companies that do not have any mobile applications would probably begin with an iPhone application.

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.