This paper deals with the opportunities for the technique of condensation, for wood fired household heaters, on the Swedish market. In this project the condenser is preceded by a scrubber and both energy exchange and separation of unburnt particles have been studied. The facility studied is connected to a wood stove at 30 kW. The tests would show that the effect from the stove never reached above 16 kW. This might be a result of the low temperature of the water going into the stove, from the condenser. In addition to this the wood was not of highest quality and the stove could have needed some maintenance before the tests.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

Ever since the development of the pc and their software, in the early 80´s,architects way of work have changed a lot. Nowadays most of the architectspresent all their works digitally and not with hand drawn material, as they didbefore the pc boom.Digital visualisation technique pushes the limits, when it is about presentingarchitecture projects virtual reality.This report studies how digital visualization technique is used among thearchitects today.Together with architects from ABAKO architect firm in Gothenburg, Sweden,interviews has been made to give answers about what they think about digitalvisualization technique. What are the opportunities, advantages- anddisadvantage with this digital technique?The answers from the architects, together with work that has been done withdigital visualization technique in a project called Project Sofiedal, shows thatthis technique has big opportunities when it comes to create nice looking VRpresentations. The result in this report also shows that this digital technique ismore time demanding compared to hand drawn presentations.The investigation shows that digital visualization technique is a goodcompliment when it is about showing the citizens how future projects willaffect the surrounding.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

I Finspång tillverkas gas och ångturbiner. Verksamheten går under namnet Siemens Industrial Turbomachinery AB, som förutom att bygga upp turbiner som separata leveranser även projekterar kompletta kraftanläggningar, där turbinerna ingår, för att producera elektricitet, ånga och värme.Till de gasturbin kraftverk som levereras av Siemens Industrial Turbomachinery AB används ett Simatic PCS-7 styrsystem för att kontrollera turbinerna. För PCS-7 styrsystemet kan mjukvaran Simatic PDM (Process Device Manager) användas för diagnostisk analys av automations komponenter och intelligenta fältenheter. Målet med examensarbetet är att kunna varna tidigare för fel på automations komponenter och fältenheter så att man kan förebygga stillestånds tider som kan uppstå i en anläggning. Examensarbetet visar vad för slags funktioner Simatic PDM har och hur programmet kan utnyttjas i en anläggning.Examensarbetet innehåller en beskrivning av programmet Simatic PDM och PCS 7-styrsystemet.

The aim of this report is to discuss computer security in handheld computers and to find out the appropriate security level that must be implemented to be able to use handheld computers within the Swedish healthcare system. Most healthcare centers are using some kind of electronic journals for their patient´s data today, but there are still a number of clinics that are usingthe old paper-system. On a few places in Sweden the use of handheld computers at the clinics has already started, but in the United States the use of handheld computers in the medical area is already widespread and from this we can see a lot of different situations where it is useful and effective to work with handheld computers. The security demands on patient´s journals are high and regulated in both Swedish law and regulations from the National Swedish Board of Health and Welfare. The law does not have any substantial demands, but states that there should be an adequate security level based on the nature of the information and the costs.

Att skriva enhetstester är en viktig del i nya populära systemutvecklingsmetoder som extreme programming. Med testdriven utveckling skriver man testerna innan den källkod som skall testas. Ett vanligt problem med dessa tester är att de blir beroende av delar i systemet som inte är intressant för själva testen. Mock objekt är en teknik som gör det enkelt att isolera tester från allt som inte är relaterat till det som skall testas.Det finns två sätt att se på mock objekt. Den traditionella synen är att mock objekt skall användas som ett verktyg vid isolering av externa system.

Det finns stora förluster i sågverk som inte framkommer av deras traditionella driftsuppföljnings¬processer. Strategiskt viktigt för organisationen är frågan vad företaget behöver göra för att bli effektivt. I detta arbete diskuteras mätmetoder av effektivitet med avseende på underhåll och hur effektiviteten kan mätas med hjälp av att beräkna den totala utrustningseffektiviteten (OEE). Arbetet beskriver också olika underhållsstrategier och processen med att införa en sådan policy på sågverk. Under en period av sex dagar beräknas OEE på fem sågverk.

I Finspång tillverkas gas och ångturbiner. Verksamheten går under namnet Siemens Industrial Turbomachinery AB, som förutom att bygga upp turbiner som separata leveranser även projekterar kompletta kraftanläggningar, där turbinerna ingår, för att producera elektricitet, ånga och värme.Till de gasturbin kraftverk som levereras av Siemens Industrial Turbomachinery AB används ett Simatic PCS-7 styrsystem för att kontrollera turbinerna. För PCS-7 styrsystemet kan mjukvaran Simatic PDM (Process Device Manager) användas för diagnostisk analys av automations komponenter och intelligenta fältenheter. Målet med examensarbetet är att kunna varna tidigare för fel på automations komponenter och fältenheter så att man kan förebygga stillestånds tider som kan uppstå i en anläggning. Examensarbetet visar vad för slags funktioner Simatic PDM har och hur programmet kan utnyttjas i en anläggning.Examensarbetet innehåller en beskrivning av programmet Simatic PDM och PCS 7-styrsystemet.

This study aims at norming a new objective method to track and measure jaw movements in 3D (three dimensional) during chewing in the young adult population (n=41, age 22-30). Norm values of the range of movements and the duration were calculated. Intra and inter rater reliability was high. Masticatory efficiency among participants was evaluated with a two-colored wax, analyzed with picture analysis software. Regression analysis was used to calculate the relationship between movement and duration variables and masticatory efficiency.

About a quarter of the Swedish land area is covered with shallow or thick peat. There is a potential to increase forest production in Sweden with almost 2 million m3/year in selected peatlands with low conservation values. This increase can be accomplished by drainage, complementary drainage, ditch maintenance operations and fertilization. The purpose of this study was to determine the level of knowledge regarding the management of forests on peatlands and was restricted to selected forest companies in Västerbotten County, with offices in Umeå. Three companies were chosen, SCA, Holmen and Norra Skogsägarna.