This thesis aims to investigate SAAB AB´s possibilities to use synthetic instruments in their test systems. The reason for this is reducing costs and the risk of obsolescence which is common when test systems operate for several decades.The market around synthetic instruments has been explored in the search for suitable hardware and software. Software has been developed in LabVIEW and synthetic instruments have been created with the help of IVI-drivers. The hardware consisted of PXI-instruments (Waveform generator and Digitizer), connected to a computer using a fiber optic link and PXI-chassi. The created instruments was then compared to common instruments used today, and the comparison turned out well.

In hydropower plants it is necessary to always have local power supply. Therefore, the plants are equipped with batteries as stationary back up power. Vattenfall Vattenkraft is using lead acid batteries but has been investigating alternatives to replace them. The aim of this study is to investigate the potential of using Li-ion technology as back up power.The study showed that Li-ion batteries have many qualities. The Li-ion technology will decrease the space and maintenance demand.

Abstrakt Produkten som jag har utvecklat är en mjukvarubaserad 3D-renderare. För att göra en sådan produkt är man tvungen att gå djupt in i området 3D och utföra alla beräkningar på egen hand. Dessa tar annars grafikkortet hand om. Denna rapport förklarar varför jag har valt att göra en egen mjukvarubaserad 3D- renderare och vad den är för något och i vilka områden den används. Här förklaras även min syn på programmering, digitala spel, vad programmering innebär för mig och hur min syn på spel har påverkat mig med tiden. Jag tar även upp mina tankar om spelindustrin och samhällets misstolkade värderingar av spel samt vad för sorts spel jag anser skulle gynna mänskligheten i framtiden. Vad jag tycker om utbildningen Digitala spel nämns också samt hur jag tror att den skulle kunna förbättras. Slutligen följer en kortfattad beskrivning av hur mitt projekt har genomförts. Abstract The product I have been developing is a software based 3D renderer.

SCA is the largest private owned forest owner in Sweden, with an ownership of 2 million hectares of productive forestland. To manage the planning of such large areas and to fit the traditional organization structure of a Swedish forest company, the planning approach is subdivided into three stages; strategic, tactical and operational. The strategic part, based on a statistic sample of stands, returns a harvest level estimate which should then be implemented at actual sites in the tactical part. This procedure can lead to incompatible solutions as the strategic solution is not necessarily possible to translate into actual sites in the tactical plan. The geographic aspect is important in tactical planning due to the large costs for moving equipment and maintenance of a large number of forest roads.

Sekretessbelagd.

The project deals with the evaluation and testing of speaker and microphone elements as well as microphone cavity.The first part of the report comprises a comprehensive theoretical part about drivers, microphone elements, and to some extent microphone cavity.The goal was to , on the behalf of the company Limes Audio AB, develop proposals on microphone element and cavity as well as drivers for a speakerphone application, based on specific factors. The main factors were performance, price and form factor.The aim was to create the best possible conditions for Limes Audio's software developers to implement the company's audio-enhancing software, mainly adaptive echo cancellation.The testing was carried out using Adobe Audition and MatLab. The test methods were developed in conjunction with Limes Audio and are described below.The project will result in suggestions for a speaker, a microphone and a cavity. The cavity were removed from the product because the results indicated that the cavity matter little for the end result.The report concludes with a discussion on how the measurements could have been enhanced to simplify the interpretation of the results and making the testing more efficient..

This master thesis reviews advances in detection and diagnosis of static friction (stiction) in control valves. Control valves suffering from stiction results in oscillating control loops which in turn decreases both the process stability and reliability. Perstorp AB sees a necessity to automatically detect stiction in valves before the effects of the malfunctioning valves have become too severe. This thesis presents an introduction to maintenance, control loops and how stiction in valves can affect performance of control loops.A selection of methods presented in the literature are introduced and examined using normal operating data from the site in Perstorp. Common for all selected methods is their intuitive ideas and that they are based on normal operating data and minimum amount of process knowledge.

There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

At Flight and Systems test Saab AB, a post-processing software is used to process GPS data. A new software by the name GrafNav has been purchased and the purpose of this master thesis therefore became, partly to make a judgment regarding GrafNav?s ability to estimate position, velocity and accuracy, partly to if needed improve the estimate and finally find one or several methods to estimate the position and velocity accuracy. The judgment of GrafNav was performed partly by a comparison to the former post-processing software (PNAV) and partly by a comparison to the airplane?s inertial navigation system (INS).

The legal situation of companies costs for investing in computer software in an income tax law perspective is described by a tax law guidance that generelly acount these costs according the principles of research and development. If there is any reason to classify the costs differently, it could mean that immediate deduction not will be allowed. For this reason it is important to establish what the legal situation would be in a more nuanced tax law classification. The tax law categories that will be analysed in the thesis are research and development, inventories, intangible assets, stocks and ongoing projects. The purpose of this thesis is mainly to give examples of what such an income tax law classification can look like.While dealing with the problems of classifying the costs some situations of competition will occure.

Cloud computing is a new buzzword within the IT-industry, and introduces a whole new way of working with IT. The technique delivers web based services, which results in that the user no longer needs to install an application locally on a computer. Since the application no longer needs to run on a local entity, but in a datacenter located on a service provider, the users no longer need any specific hardware more than a computer with an internet connection. Cloud computing also offers IT-infrastructure and development environments as services, these three service types is better known as cloud services. Through the usage of different types of cloud services, the need for maintenance and hardware is significantly reduced.

Today there are a big need for a system that delivers overview of all available units for different municipalities and shipping- and security companies due to the increasing requirements for efficiency. The purpose with this graduation thesis is to find out which systems that is suitable to use while developing cost-effective software for positioning and to produce a prototype for such solution.This assignment has been done at the request of PocketMobile Communications AB. PocketMobile is a company that are specialized on delivering modern mobile software solutions and systems to companies with their own vehicle fleet or mobile workers.This master thesis can be split into two separate parts, the theoretic- and the practical part.The theoretic part includes producing a number of functional requirements in cooperation with PocketMobile and comparing the available systems against the function requirements.The practical part deal with the development of a prototype that demonstrates the software recommended. The development tools that best matched the functionality requirements when the selection was made in May 2007 were Map24 and OpenLayers. The system that was selected to use while developing the prototype was Map24, because this product matches all of the requirements and it is also suited for professional usage regarding support, scalability and reliability.

As changes occur more frequently in IT- and software development, it is important for the companies to meet the demands and needs of its customer. The companies have to be able to adapt themselves continuously in order till fulfill its customers changing needs in an effective way, which results in big changes of the companies? structures. The more traditional way of working is often replaced with more alternative approaches as a response to the reputable deficiencies of its predecessors. As an effect of the rapid change and development some companies now see big potential in switching to more Agile and flexible methods and some companies have no choice but to change their way of working.

Webbaserat Tidrapporteringsystem.

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.