This report is the result of a thesis work done at the Department of Engineering Sciences, Uppsala University, and includes 15 ECTS points. The work has been performed at Företag A, a company specializing in electronics whose major product has become a sophisticated tool used by authorities across northern Europe. Företag A has initiated a quality management system according to the criteria set by ISO 9001. Following demands from customers, Company A has now decided to also start working towards a certification according to SS-EN ISO 9001:2008, this work is the foundation for the thesis work. The thesis work has been limited to the production process and the aim has been to enable this process to be certified according to ISO 9001:2008. The work has been performed by analyzing the existing quality management system and the requirements for each process included, whereby the gap between the current and the target state has been mapped. Suggestions have then been made on how this gap can be filled, some of these suggestions have also been carried out during the thesis work. The conclusions drawn are that quality management does not have to be complicated, but quickly becomes so when the complexity of the processes increases.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

ABSTRACT. Mastitis is one of the most common diseases affecting dairy cows worldwide. In Sweden annu-ally about 60% of the dairy cows get infected and Staphylococcus aureus cause approximately 30% of these infections. Mastitis causes enormous economic losses. In Sweden, the costs to cure mastitis are estimated to be 192 million SEK per year, excluding the costs for mastitis prevention.

The aim with this report was to exam and surveys the internal logistics of Proton Finishing?s production. The basic data should give the company suggestions of more efficient and improved internal logistics. We will also give from our perspective suggestions of improvement, which the company will be able to evaluate.To evaluate these problems we used different kinds of methods. A frequency study was made on the internal forklift.

Due to a growing interest in communication in today?s society the demand for equipment that is used in communication networks increases while the competition between companies that produce this equipment grows. To meet the increasing demand and at the same time having a competitive product development many companies use some effective product design, such as the modular product design. When a modular product design is used it?s good to compare different module configurations for a certain product and to simplify these comparisons some tool can be used.

The purpose of this report is to find a model of statistics for construction and demolition waste, which makes it useful for the local manager at the building site. The intention with the model is that it will be used as a support of the local manager, to direct his project towards reduced strain of the environment. The model will also be used to make it easier to control that the claims from authority and aims for the environment are achieved. To familiarise with the subject waste handling within the building and construction sectorI have done a literature search. I have also been studying rules and regulations regarding the waste handling.

This report is introduced with a presentation of fundamental electromagnetic theories, which have helped a lot in the achievement of methods for calculation and design of microstrip transmission lines and circulators. The used software for the work is also based on these theories. General considerations when designing microstrip solutions, such as different types of transmission lines and circulators, are then presented. Especially the design steps for microstrip lines, which have been used in this project, are described. Discontinuities, like bends of microstrip lines, are treated and simulated.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

This thesis deals with numerical simulation of earth pressure against tubular bridges in the software Plaxis. Plaxis is a FEM (Finite Element Method) software based on numerical calculations for which approximate solutions are developed through an iterative process. The program is specifically designed for soil and rock mechanical tests, such as voltage and deformation calculations in soil.The Royal Institute of Technology conducted in 2005, field tests on tubular bridges of corrugated steel, which was part of Ersa Bayoglu Fleners PhD (Bayoglu Flener, 2009). She studied how two different tubular bridges deformed during installation and filling. Tests and measurements were made during filling.

Ett Film som projekt, en film om ljud, en film om ljudet i film. En film inspelad professionellt med professionella medarbetare. Kandidatarbetet gick ut på både skapa en film inriktad på ljud och skapa ett fungerande filmteam. Arbetet tar upp både det tekniska inom filmljud men även processen i ett filmteam. I arbetet följer vi processen från dess början till dess slut.

Ground construction has to a large extent been dominated by traditional meth-ods during the last 50 years. Although the construction has been changed meanwhile innovations are not accepted. In collaboration with NCC Ltd Region South, I have examined a modern con-struction methodology that has been developed by NCC for future large pro-jects. The method is divided into two central phases. Phase 1 is? Single Pro-duction? which is a preliminary period for ground constructions to come.

Sammanfattning Energieffektivisering av tre flerbostadshus från 50-talet Detta arbete redovisar vilka åtgärder som är lönsamma ur ekonomisk synvinkel och kan leda till minskad energianvändning hos flerbostadshusen på Ystadsgatan 12-18 i Helsingborg. Eftersom dessa flerbostadshus är uppförda under 1950-talet och kan anses vara typexempel för flerbostadshus byggda under detta decennium kan detta arbete ge inspiration åt andra bostadsrättsföreningar och hyresrättsägare som också funderar på att göra besparingsåtgärder i sina 50-tals hus. Huvudtanken med arbetet har varit att få ner den specifika energianvändningen och inte ändra de boendes beteende vad gäller individuell hushållsel. Att minska den specifika energianvändningen innebär att åtgärder måste göras inom följande område: styr och reglerteknik, installationsteknik och byggnadsteknik. Våra åtgärdsförslag är tilläggsisolering av vindsbjälklaget och vindsvåningarna, samt installation av ett solvärmesystem.

Urban agriculture is a current topic and this study examines the possibility of cultivating on balconies in the city. The study was performed at Uppsala University and examines, from a structural engineering perspective, how different existing balcony/terrace structures are affected by cultivation. A cultivation balcony defined in the study as a balcony/terrace which is specifically designed for cultivation. Three units of study have been selected according to this criterion. Four factors were examined, these were loads, moisture/water, economy and cultivation.

Forestry in Sweden is currently conducted in a manner aiming at equating the production objectives and the biodiversity. To ensure that biodiversity is maintained, patches that are considered to be valuable now or in the future is saved in final fellings. How the tree retention areas will grow into the future forest stands is yet unknown.The purpose of this study was to visualize how different scenarios of natural consideration taken at final felling will evolve in a long term perspective, for two rotation periods. Projections of the forest conditions were executed with the decision support system Heureka and its applications PlanStart and PlanWise. The information about the projected forests was then used for the visualizations which were created in the software Visual Nature Studio.

The aim of this thesis is to describe digitization of images in two Swedish museums. We want to examine their reasons to digitalize; the administrative and organizational aspects of their work and how they handle the problems of preservation and access to the digitalized images. These problems will be examined through our main questions: Why do the museums choose to digitize their image collections? How are their work organized in terms of staff and economical matters? What kind of software do they use, and which technical solutions do they choose? Which preservation and access strategies for ensuring long-term preservation and access of the digital images do the museums work with? How do the museums select material for digitization? How do they handle the matter of discarding of materials? The study was conducted both by reading text material and interviewing personnel at the two museums. The museums? main reasons for digitization seem to be to protect fragile materials from deterioration and provide greater access to the collections.