No infrastructures today are growing faster then communication network. The requirement of being able to communicate in a fast and qualified environment to a low cost increases in line with the development and competition. Itera Networks is no exception when it comes to rapidly developing new and better network solutions for themselves and for their customers. With these requirements in mind their needs for an analysis of the existing communication solution becomes very obvious. This project contains such an analysis in which various studies of the existing network environment have been made.

This research paper is a thesaurus construction for the interdisciplinary subject of landscape planning. The personnel doing the indexing of documents at the Swedish University of Agricultural Sciences had earlier expressed a need for such a work within the fields of Landscape Architecture and Landscape Engineering. However our objective was not to create a complete thesaurus, but instead a basic construction which the personnel at the Agricultural University could expand upon. The actual construction is based upon ISO 2788-1986, Documentation Ð Guidelines for the establishment and development of monolingual thesauri, and Aitchison, Gilchrist and BawdenÕs Thesaurus Construction (1997). The line of enquiry taken has dealt with the problems relating to the collection, selection and control of indexing terms.

The management of information is one of the key aspects within a successful andefficient product development process, particularly regarding complex products.Scania CV AB is at the moment developing a new IT-system, OAS, which aims tomanage the company?s product data. With this as a background, the purpose of thismaster thesis is to identify the cross-functional user needs within Scania?s organizationconcerning product data and the management around it.To fulfill the purpose, an empirical study consisting of 40 personal interviews with 50representatives from different functions within Scania?s organization was carriedthrough. The empirical data was then analyzed focusing on identifying thecross-functional needs and issues.The study points out that there is a big potential regarding improvement among themanagement of product data.

The aim of this study was to investigate preschool teacher?s perceptions about the curriculum goal concerning simple chemical processes. The result was based on narratives received by a qualitative study and semi-structured interviews of six preschool teachers. The results of the study showed that preschool teachers perceive that they actually are working in a relatively small scale with simple chemical processes and they do not really know what simple chemical processes are, and do not feel very familiar with the subject. Water, dough, mud, paint and baking were the most common activities that were used when working towards the curricular goal. However, it was never explained to the children that it was simple chemical processes they were working with during the activities, neither was it discussed among colleagues because of the uncertainty about the concept.

Sten Jonsson wants to start a production of an advertising catalogue for small companies in Sweden. Acatalogue where the advertisingcost is so low that most of the companies can afford to participate. Thecompanies who will advertise should be manufacturing companies in trades of carpentry, sheet metalworkshops, forging workshops and engineering workshops.The catalogue will facilitate for the manufacturer to reach the costumer without any middleman.Without a middleman creates a possibility for an opinion about the product at the same time as theprice can be held low. A catalogue of this type would benefit the marketing of the companies at the sametime as it would generate an occasion for innovations.The possible target groups are property companies, construct companies and farmers.A market research has been carried out contained a postal interview and a phone interview. Themarket research carried out to get an understanding in what the companies think about the idea butalso to see if the companies are in interest of advertise in the catalogue.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

The aim of the thesis was to explore the attitudes toward social documentation held by care personnel, as well as factors that could have an impact on the process of social documentation. The study is based on a survey encompassing 100 respondents working as care personnel at six different eldercare units at Kungsholmen in Stockholm. The data was analyzed by quantitative methods, using a statistical software package (SPSS). The main questions in the study are whether the respondents know how, what and why they should document, what obstacles they experience and what they would need in order to document more or better, as well as whether there are factors that influence their attitudes and knowledge regarding documentation. The key results show that more time is the most common need, and lack of time the most common obstacle to social documentation reported by the respondents. Furthermore, the results show that those who report that they are satisfied with their working conditions are most likely to also report that they know how and why social documentation should be conducted. These results suggest that it is urgent for organizations to create good working conditions in order to increase motivation for social documentation. The results are analyzed using organizational theories.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Människan har genom sin industriella framfart bidragit till ökade nivåer av växthusgaser i atmosfären och på så sätt rubbat den balans av gaser som naturligt förekommer. En klimatutveckling med trender som tyder på en framtid med varmare klimat är en av konsekvenserna av den process vi i alldagligt tal benämner växthuseffekten.Ett varmare klimat förväntas medföra förändringar av en rad faktorer, där medelvattenståndet i världshaven är en. Med en geografisk lokalisering i direkt anknytning till kusten och en topografisk lokalisering på dryga 2.65 m över havet skulle Karlshamnsverket kunna vara i farozonen för de konsekvenser en höjning av intilliggande hav kan medföra. Karlshamnsverket är ett värmekraftverk som ägs och drivs av Karlshamn Kraft AB. Anläggningen ligger utanför Karlshamn, vid Blekinges kust, och redan idag råder viss problematik vid högvattenstånd.

Stockholm är en växande stad och för att bemöta det behov av bostäder som expansionen medför, krävs att befintliga fastigheter utvecklas och får nya, bättre anpassade ändamål. Det är framförallt viktigt att utveckla de fastigheter som är belägna i attraktiva områden med pågående stadsutveckling eller goda möjligheter för ny stadsutveckling.Denna rapport behandlar utvecklingen av Vandenbergh 9, ett kontorskomplex från tidigt 1970-tal till ett modernt bostadshus. Rapporten resulterar i förslagshandlingar över hur den invändiga gestaltningen kan komma att se ut. Förslaget följer alla de lagar, stadgar och rekommendationer som idag ställs för byggnation i Sverige.Detta resulterade i sex individuella plan, men för att främja hållbart och rationellt byggande har ett stort fokus lagts på modulbyggande. Rapporten redogör för hur en fastighet i en stor skala kan utvecklas och erhålla ett nytt syfte..

When building a house or similar the stress on the ground increases and deformations can arise. The deformations create a foundation that the building is not constructed for and damages on the building arise. The increased stress on the ground can be derived back to the building, but it is possible that the increased stress may well derive from different sources such as other buildings or trees.       The building is an older property, built in the late 19th century alternatively early 20th century, and is today used for rental housing and has suffered severe damages due to subsidence. The goal of the thesis is to find possible causes for these subsidences. The thesis was executed as a combination between literature- and casestudie. After careful studies it has been found that a probable cause for these subsidences is trees. Through field- and lab studies it has been found that the trees has effected the ground through there accumulation of water.

This report will try to evaluate the use of rented concrete casting moulds, which are used to build walls and system of joists. The evaluation is only examining the economical aspects.The cost of using concrete casting moulds is a big part of the total production expenses. Therefore it is important that the calculated price not exceeds the final costs of the casting moulds. The calculated price is the price used in the process of making an offer.The evaluation consists of a comparison of the calculated price and the final costs for three building projects. It also evaluates the exploitation of the concrete casting moulds for each project.The report is made by Sven Gynne and Anders Alexandersson at School of Engineering, Jonkoping University, in cooperation with PEAB Jonkoping.

This report summarizes a Bachelor Degree Project in Integrated Product Development,carried out during the spring semester in 2007 by three students at the Product Design Engineering programme at the University of Skövde. The project was performed as an assignment for KinBag ab, a sister subsidiary to Kinnegrip ab in Lidköping, who develop,manufacture and market the golf bag KinBag, a bag with an integrated wheel carriage system. The purpose of the project was to redesign the golf bag to attract a target group consisting of golfers aged between 20 and 40.The layout of the project was as follows: The project began with a feasibility study where different problems were identified with the basis of a market research which eventually was summarized in a dynamic specification of requirements. The feasibility study was followed by a generation of ideas which contained everything from sketches to simple mock-ups with an intensive amount of thoughtful brainwork and information gathering in between. This ledto the development of a number of design concepts, both on an overall level and on different parts of the golf bag.

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.