In this paper we analyze a social network specifically designed for the elderly, people with Dementia and people with generally low computer experience. This is a relatively unexplored use for such software, and our goal is to find out whether the technique to be used is simple enough to use for the intended user group, and generally how the whole situation is experienced by the users. To achieve this we conducted an expert evaluation and interviewed a number of users at two separate occasions during their first weeks with Modernfamilies. We came to the conclusion that this software generally is simple enough to use for the intended target group. Some of the users we came in contact with experienced the software as a positive addition to their daily lives, while some could not see any reason for a further use.

The regulations for energy consumption are consistently getting more and morestrict. This leads to a higher customer demand for energy analysis early in the buildingdesign process. Many building planners and architects use powerful modeling softwareto visualize their projects. These digital models contain sufficient information aboutthe building?s physical characteristics for reliable energy analysis.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

The advantage and the possibility of keeping track of a number of vehicles to make work practice more effective and smooth is today a favorable choice for Visual Units Logistics customers. We?ve been evaluating the software and trying to take it one step further and letting not only the individual user, but maybe, the company as a whole benefit from its advantages. This has been done by using methods like letting ourselves get to know the software, user case studies, workplace studies, interviews and future workshops. This resulted in a prototype introducing a new function designed with all collected data in mind trying to make the software, Visual Units Logistics, even more effective for the every day work practice of the user.

This work aims to evaluate the possibility of using a graphical programming language to develop software for a digital signal processor. A fixed-point digital signal processor called Blackfin BF-537 is used for this. Instead of using conventional programming languages, like C or assembler, for software development the possibilities to use a graphical environment to fill the same purpose are examined. The development environment primarily used is NI LabVIEW, but also the use of Mathworks Matlab Simulink is investigated. A variety of programs consisting of various signal processing operations and utilities are developed using these development environments.

Traditionell systemutveckling präglas ofta av långa utvecklingsprocesser och en oförmåga attmöta förändrade behov från kunden. Problematik med buggar i mjukvaran och förskjutnadeadlines uppstår kontinuerligt och leder till högre kostnader för företag.För att komma till rätta med dessa problem behövs en systemutvecklingsprocess som belyserproblem direkt när de uppstår och därmed tvingar de inblandade till reflektion över processensom skapar problemen vilket belyser de verkliga bakomliggande orsakerna. Låg kvalitet påmjukvara är ofta ett symptom på djupare organisatoriska problemEtt synsätt som syftar till att möta dessa problem är lean software development. Synsättet harinspirerats av lean production som är en beskrivning av The Toyota Production system vilketi sin tur är det arbetssätt som har tillämpats av Toyota under flera decennier i den traditionellatillverkningen.Mary och Tom Poppendieck har beskrivit sju principer och 22 tankeverktyg som kananvändas för att skapa en metod för lean software development. Studien visar vilka styrkoroch problem som lean software development och lean production beskriver generellt samtvilka styrkor och problem som finns avseende beskrivning av Poppendieck's principer ochtankeverktyg i synnerhet.

The European Brown bear (Ursus arctos) has gone from basically being extinct in Sweden to, 2008 being estimated to a total of 3298 individuals. When looking at the new Swedish moose management system it is important to have an ecosystem-based approach and therefore include all the parts that moose impacts on and from in the management, especially the brown bear. Primarily in the spring and early summer the brown bear is a significant predator on moose calfs which must be taken into account in moose management. When the bear recolonize areas that it has previously been eradicated from, it will once again come in contact with people who are not accustomed to the bear's role in the ecosystem. We studied three groups of moose management areas with different predation by bears.

The focus on this essay is derived from an international and national dialogue for sustainable development. The recommendation from international level has been to find solutions for governments to implement strategies for sustainable development between local and regional level. This initiative is to improve and stimulate the dialogue between the local inhabitants, officials, entrepreneurs and stakeholders in the communities together with the authorities on the regional level. The purpose is to share knowledge and find ways to learn about the natural systems and how to co-operate in the work of preserving the natural resources and developing different processes for a sustainable development. Many scientists? today stress the importance that ecosystem resilience is promoted by biodiversity conservation and that we need to find solutions for local ecosystem management practices.This essay aims to find theoretical approaches and perspectives that can be used in a wider framework to study co-operative processes between the local (agent) and regional (structure) level.

This report describes a final thesis done during the spring of 2008 as part of the bachelor degree in computer engineering degree at the School of Engineering in Jönköping.The client is working in the consulting business and is involved in, amongst others, work regarding information security. Within this field they perform so called Threat, Risk and Vulnerability assessments. Today these assessments are done by a predefined method, but many details are controlled by the person documenting the project. A wish was made that the implementation was standardized, it should also ease the task of estimating the need for time and money. The solution for this seems to be a software tool.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The advantage and the possibility of keeping track of a number of vehicles to make work practice more effective and smooth is today a favorable choice for Visual Units Logistics customers. We?ve been evaluating the software and trying to take it one step further and letting not only the individual user, but maybe, the company as a whole benefit from its advantages. This has been done by using methods like letting ourselves get to know the software, user case studies, workplace studies, interviews and future workshops. This resulted in a prototype introducing a new function designed with all collected data in mind trying to make the software, Visual Units Logistics, even more effective for the every day work practice of the user. A new function to keep track of vehicles outside the main working area at the same time as you still can keep track of the other vehicles in the field..

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

In recent years, agile software development methods have become increasingly popular throughout the world. Today there are a number of different agile methods and they all rest on the Agile Manifesto that was formulated in 2001 as a reaction to the traditional software processes.The aim of this thesis is to make a survey of some of the agile methods used today and to see how they are being used in practice. It consists of two parts: a literature study and an interview study with people working in the software business. First, a definition of agile methods is proposed and a number of different agile methods are described. Second, the interviews are being analysed with special focus on communication, collaboration, expectations and results.

AbstractThe ability to read and write is a very important skill in today?s information based society. Most of us learn how to read and write, but not everyone is blessed to do this without struggle. Dyslexia is a very common learning disability and therefore I found it interesting to study how teachers teach students with dyslexia.By studying the literature and by interviewing teachers, I found that dyslexia is a very complex disability. The teachers have to adapt their way of teaching in a way that a student with dyslexia can participate.