Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This report is a specialization in Software defined networking. SDN really comes to revolutionize the industry and it?s under constant development. But is the technology ready to be launched into operation yet? The report would initially involve a number of problems that today's network technology is facing.

Denna rapport är ett resultat av examensarbetet på 10 poäng som avslutar högskoleingenjörsutbildningen Industriell design (120p) vid Luleå tekniska univeristet (LTU). Projektet har bedrivits på uppdrag av Saas Instruments Oy som utvecklar, tillverkar och säljer fiberoptiska belysningssystem. Projektuppgiften var att utveckla och anpassa en redan befintlig belysningsarmatur i SAAS sortiment. Armaturen som har benämningen STEP har för avseende att sitta monterad i trappor. Hur och var detta skulle vara möjligt var dock oklart för SAAS.

In this final thesis two simulation models have been integrated. The simulation models are models of JAS 39 Gripen?s fuel system, software and hardware. The time consuming and costly work to develop software has made the department of fuel system to build two models in Xmath/Systembuild. The software model also simplifies the comprehension of how the software in the control computer of the fuel system works.

Na?r en ny webbapplikation skall lanseras och driftsa?ttas a?r det sva?rt att i fo?rhand veta vilken datatrafik och belastning som tja?nsten beho?ver vara dimensionerad fo?r.Rapporten fo?ljer en webbapplikation som inte a?r fo?rberedd fo?r uppskalning till att bli separerad i olika komponenter fo?r o?kad skalbarhet och driftsa?kerhet.I rapporten genomfo?rs a?ven en komparativ studie pa? olika typer av molntja?nster som erbjuder infrastruktur (IaaS)-, plattform (PaaS)- och mjukvara (SaaS) som en tja?nst.Ma?let med underso?kningen var att hitta en kostnadseffektiv metod fo?r att expandera applikationens infrastruktur och flytta implementationen till molnet.Resultatet och slutsatsen visar att den dyraste lo?sningen inte alltid a?r den ba?sta och i sluta?ndan kan fo?retag betalar pengar fo?r resurser som de inte utnyttjar..

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Sekretessbelagd.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This report deals with the attitudes within municipalities of open source software and open standards and if open source software may be an option to gain open standards. The aim has been to find out if open source software and open standards would be able to solve the lock-in problems that municipalities have against proprietary software. The study is conducted as an exploratory, inductive and qualitative study with depth interviews of subjectively selected informants as data collection method. A literature review has also been implemented by the relevant books and articles. Some economic determinants of municipalities to make use of open source software have not been considered in this study.

The Lugnetgymnasium in Falun has a graphic education that supplies a color printer, which is availablefor the students in their hall. The printer is a Ricoh AFC 6513 and it is a model that can handlevariable data. It was bought in the autumn of 2002. The teachers of the graphic education want to makeuse of the variable data function and procure a variable data software. The purpose of this project is toevaluate variable data software?s, so that the most suitable choice of software can be made for the graphiceducation.

Summary Title: How to make decisions on software based servicedevelopment in the mobile handset industry.?The Rapid Model for Holistic Application Evaluation Authors: Per-Inge AnderssonPatrik Dreveborn Tutors: Björn Regnell, Department of Computer Science,Lund UniversityRobert Wenglén, School of Economics and Management,Lund University Problem formulation: Academically the questions of finding out what constitutes a sound decision base and finding out how to handle the issue of a holistic approach must be addressed in order to make a well balanced and relevant decision model. The core question is which decision criteria to include and which drivers are important in estimating the status of the criteria? Practically to provide Sony Ericsson with a formalized evaluation process for decisions on software development that is transparent, objective and challengeable. Purpose: Academically to contribute to the field of decision making research by elaborating on how to make a holistic, rapid and rational decision model.

MolnetärIT-­?världensmestomtaladefenomen.MolnetharmöjlighetattrevolutioneraanvändningenavITpåenmängdområden.Ävenommolnetärensynonymförinternetsåärdetmycketsomskiljersig.Mångaartiklarfokuserarpåhurföretagskavågasigutimolnet,medanidennauppsatssåharviundersökthurenleverantöravmolntjänsterserpåmolnetsmöjligheterochbegränsningar,samthurdennekanövertygaföretagatttastegetutimolnet.Vibörjademedattstuderarelevantanyheterförattsedanformuleraenenkätundersökning.Medhjälpavdesvarvifickienkätenutformadeviintervjufrågorförleverantöreravmolntjänster.Vigenomfördesedantreintervjuermedkvalitativutgångspunktmedorganisationersompåettellerannatsättlevererarmolntjänster.Ettsyftevaratttaredapåomanvändningenavmolntjänsterskiljersigmellanprivataochoffentligaorganisationer.Viundersökteävenomdestorahaveriersomnyligenägtrumhaftnågonpåverkanpåföretagssynpåmolntjänster.Detresultatvifickframvarattdetvarväldigtviktigtattkunnagaranteraenbraupptid,samthaenbetalningsmodellsomvarienlighetmeddetjänstersommolnetmöjliggör.Dåmolnetfortfarandeärettnågotdiffustbegreppsåärdetocksåavstorviktattdefinierademolntjänstermantillhandahålleriformavvadexaktdeinnebär.Viktigtärattmansomleverantörkanerbjudanischadeprodukter.Detärocksåviktigtatthadefinitionerpåtjänstermanlevererarochanvänder.Offentligaorganisationerharandraförutsättningaränprivatadåmanmåsteföljalagarsomregleraroffentligupphandling..

I dagens organisationer verkar mjukvarusystem som har varit länge i drift och genomgått mycket underhållsarbete. Detta kan göra att systemen är dyra att underhålla, inte uppträder som förväntat eller inte går att införa ny funktionalitet i. Dessa system är i regel väsentliga för organisationens verksamhet och bör därför inte nyutvecklas för då riskerar organisationen förlust av verksamhetskritisk information. Lösningen på underhållsproblem och dåligt skapade system är istället att göra en software reengineering. Detta kan medföra att systemet bibehåller kritisk verksamhetsinformation samt har en bättre systemlösning, vilket leder till lägre underhållskostnader och mer genomtänkt arkitektur.