The building industry are currently going through a huge alteration. The introduction of BIM (Building Information Modeling). Which also implements a lot of new ways of solving problems that building modeling can cause. This report is written for Uppsala University in cooperation with Temagruppen in Uppsala. However, it contains a comparison between two different systems that checks building models.

The title of this thesis is ?Accessible Landscape - boardwalks in nature areas?. The main purpose of this thesis is to show how you can increase the accessibility for disabled people by constructing boardwalks in nature areas. The platform for the thesis is a study of litterature on boardwalks, accessibility and disabilities. After defining these terms I made three excursions to three different locations in the south of Sweden. During the excursions I evaluated the boardwalks situated in each of the areas through preferences such as the construction of the boardwalk, its design and the accessibility. After the excursions I interviewed managers of the areas I visited, and people working with disability questions in the municipalities where the excursions took place. To know how to make a boardwalk accessible you need to have knowledge about certain concepts, rules and recommendations. My thesis deals with aspects such as: *Accessibility *Disability *Rules and recommendations when building boardwalks *Real life - evaluation from the excursions and interviews with the managers The result shows that accessibility is a hot topic in Sweden and a lot of improvement is being done with fi nancial support from the European Union.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The aim of this study was to examine the social relationships between children and librarians during reference interviews. Using qualitative interviews with five children's librarians I illustrate attitudes and behaviours during a reference situation which take place in psychological, social and even in pedagogical contexts. The literature review comprises studies of the reference interview with children and youth, a description of interpersonal communication and finally social interaction and dialog between teachers and pupils. The main result of this study was the demonstration of a dichotomy in modes of interpersonal communication. In one mode, the social frame is emphasized.

Organisations tend to focus more and more on product and process development to increase their competitiveness. Several major organisations, among them ABB, have developed models aimed to more effectively control and manage product development processes. ABB is using its standardised model ABB Gate Model for this. The purpose of this thesis is to analyze how the introduction of ABB Gate Model has affected the outcome of decisions and also the decision-making in the product development process. The study is limited to elucidate the version of ABB Gate Model handling product development projects.

This qualitative interview study examines the shared and discrepant experiences that nine professionals, three from each field of psychiatry, social service, and housing have from working with people with hoarding disorder, and their view on help. The main difficulty when working with hoarding disorder is described as lack of insight and understanding of the severity and consequences of the disorder among people with the disability. Professionals highlight the importance of proper diagnosis and cooperation among disciplinary teams working with hoarding disorder. Approaches differ regarding the issue of how to best help a person with hoarding disorder, especially as the emphasis of autonomy becomes more prevalent. The landlords who were interviewed expressed the hoarders? need of help from the society, whereas the social service interviewees accentuated voluntariness and motivation as a favorable long-term management.

Aphasia is a disease that brings on disability. The purpose of the study is to describe the daily life when afflicted with aphasia and gain a deeper understanding of persons with aphasia in working ages. The study was made with a qualitative approach with a combination of data sources; literature, internet lectures, live lectures, interviews with personnel in medical and educational services and three persons with aphasia. More research in aphasiology is welcome. This may be aimed at developing knowledge about the importance of communication, of active participation in the social environment, and the achievement of improved attitudes towards people with disabilities. The study should give rehabilitation actors and close relations knowledge and support in their action when they meet people with aphasia..

Abstract:Objective: This study aimed at describing the health concept in the Swedish follow up programme for cerebral palsy (CPUP), with main focus on how aspects of participation is expressed in the agenda of the programme. Design: Document analysis: The home-page of CPUP was searched for three types of written material; references to the nature and aim of the programme, protocols used for data collection and abstracts from articles and reports on the list of publications. Within these all expressions of health, with bio-psycho-social understanding of the concept, were extracted and condensed with manifest content analysis. The meaning units obtained were linked to the International Classification of Function, Disability and Health ? Child/Youth (ICF-CY).

AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated.  It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.

This study investigated the effect different contexts have on personality items when they are framed more neutrally. The study was based on a five-factor personality inventory originating from International Personality Item Pool. The inventory consisted of 50 original and 50 neutral personality items and in addition 28 items measuring social desirability. The sample consisted of 150 students from the Department of Psychology, Lund. The students were divided into three instruction groups differing in context.

AbstractTitle: Cooperation between social enterprisesLevel: Final assignment for Bachelor Degree in Business AdministrationAuthor: Anna HammarbergSupervisor: Maria Fregidou-MalamaDate: 2012 - JanuaryAim: The aim of the study is to investigate social enterprises and the Glada Hudik-model to understand how social enterprises cooperate and how they can develop the cooperation through Social Enterprises in Co-operation (SAK). Method: I have done a qualitative research study. I have studied literature to get theoretical background. I visited a seminar to get information and inspiration. Interviews have been done with six persons to get empirical information.      Result and conclusions: Through this study I have seen that social enterprises can co-operate to strengthen their position in the community. Together they can run issues they have in common, undertake major assignments and purchase material to get better deals.