Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

I ett samhälle där upphovsrätten och immaterialrätten blir allt mer uppmärksammad är det viktigt för företag att vara medvetna om sitt innehav av licenser för mjukvaror. I detta arbete kommer företags medvetenhet om deras licenshanteringssituation att undersökas. I den här rapporten kommer problemställningen att undersökas med hjälp av intervjuer med företag. Dessa intervjuer kommer att ske via telefon och per e-post. Ett liknande arbete har tidigare inte gjorts och därför känns det relevant samt intressant att göra denna undersökning.Arbetet resulterade i intervjusvar från 11 företag.

Bakgrund: Ett antal nya idéer har blivit introducerade i ekonomistyrningen på senare tid och mycket har skett inom Business Intelligence (BI). BI har dock mest funnits som del av ett större system eller eget system som implementeras till företag på plats. Konceptet att istället hyra olika IT-lösningar, så kallade SaaS-lösningar (software as a service), blir allt mer populärt inom affärsvärlden och kan minska företagens börda när det gäller installation, konfigurering, underhåll och andra inneboende projektriskfaktorer.Frågeställning: Vad innebär fenomenet SaaS BI och hur ser spridningen ut?Syfte: Syftet är att beskriva Business Intelligence som hyrtjänst, samt studera hur detta sprids och anammas av marknaden i Sverige.Metod: Vi har använt oss av en kvalitativ undersökningsmetod för att samla in djupgående data till studien.Resultat och slutsatser: Studien visar att SaaS BI är en innovation. Spridningen av SaaS BI på den svenska marknaden är begränsad och spridningen sker i dagsläget främst från utbudssidan, alltså förespråkare av innovationen.

This bachelor thesis portray a project where the main task were to develop a computer based system prototype for handling of absence report at the upper secondary school af Chapman in Karlskrona. The project has been conducted in cooperation with students from the university programs software engineering and information economy at Blekinge Institute of Technology. Our task as MDA-students have been to survey the process of absence report of today through field studies and give a proposal of a graphical user interface which later were developed by the software engineers. The thesis also handles the cooperation with other students from other university programs..

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Testing has always been an important task in the scope of software quality. Though it has never been as much appreciated within the management of the organisations as the software development has. However testing is becoming more attractive within organisations because it becomes more evident how much money working systems saves in contrast to defect ones. A tester often use testing tools to simplify the work progress. There are a lot of tools nowadays but not many evaluating models which helps the tester to know which one to recommend.

Global Software Development (GSD) is based on a geographical distance where teams are spread throughout the world. The related research have for a long time addressed the challenges presented by geographical distances. GSD is basically a necessity for many businesses to use in order to reduce development costs, reduce production time and to maintain high quality. The study aims to investigate the relationship between the reality of a specific maintenance project. Thus, our research question: How do distributed maintenance teams experience temporal, geographical and socio-cultural distances? To achieve the purpose of the study, we chose to perform a case study of a global consulting company which recently started a new system maintenance project.

The society strives for sustainable development, in the construction industry it is expressed through sustainable building. Energy and LCC analyzes increases the ability to make conscious decisions in the process. A problem in the construction industry is that energy and LCC analysis is not used to the desired extent, as they are perceived as complicated and time consuming. The report aims to achieve a more sustainable building through increased use of energy and LCC analyzes.The goal is to show how BIM can be used to improve the efficiency of the energy and LCC analyzes.The study was conducted with a literature review and a case study to answer which information that is required in a BIM model to perform energy and LCC analyzes. The study also shows which software can be used in BIM based energy and LCC analyzes and how the analyzes can be carried out efficiently.The result shows that effective analyzes may be performed if the BIM-model contains the relevant information for making analyzes.

Att sätta sig in i system kan vara krångligt utan rätt sorts dokumentation. Vi har undersökt vilken dokumentation som kan vara lämplig att lämna över till nya utvecklare, som ska arbeta vidare med systemet i software maintenance fasen.Det har gjorts genom att vi har gjort en litteraturstudie om dokumentation samt undersökt vad för dokumentationsartefakter som används när man ska sätta sig in i datorsystem. Vi använde eXtreme Programming för att utveckla ett system som vi försökte dokumentera samtidigt som vi utvecklade det.eXtreme Programming förordar muntlig kommunikation, vilket är svårt att lämna över till nya utvecklare. Vi upptäckte under vår utveckling att det var svårt att föra in dokumentation sam-tidigt som utvecklandet pågick,  därför använde vi bara enhetstester och  strukturerade kod-kommentarer under utvecklingsiterationerna.Vi undersökte hur dokumentationen som skapats fungerade genom att göra en undersökning bestående av strukturerade intervjuer där de fick komma med kommentarer om hur dokumen-tationen hjälpte förståelsen för systemet.Vi lämnar ifrån oss en vidareutveckling  av eXtreme Programming  som innefattar en doku-mentationsiteration  innan överlämnandet  samt en studie om vad för dokumentation som är värdefull att ha vid systemöverlämningar..

Modeling and simulation is growing ever more important in the development of new products. This thesis describes the use of Hopsan for hydraulic modeling and its use in conjunction with Simulink with the intent of using the model in a hardware-in-the-loop setup. A sensor layer has been created in Simulink to emulate all the internal sensors in a modern forklift. The details of using legacy C-code instead of a hardware MCU for a fully simulated environment, software-in-the-loop has been outlined. There are two major routes one can follow implementing software-in-the-loop, exporting the C-functions to CAPL via a export layer or creating an s-function in Simulink.

In contemporary encryption the vast amount of text subject to cracking has brought about the demand for methods distinguish files more likely to be encrypted. The encryption software Truecrypt can encrypt files that are not possible to identify with a file signature. To solve the detection problem, an algorithm sensitive to the absence of structure in the very code of files was developed. The program was written in the programming language EnScript which is built into the forensic software suite EnCase. The essential part of the algorithm therefore deployes the statistic of a chi-square test for deviance from a uniform distribution to distinguish files with contents that appear to be random.

With the digital revolution within video games, the need for Digital Rights Management (DRM) has increased significantly, alongside with the increasing problem of copyright pirates. To counter pirates, DRM was created to prevent illegal copying of software, this to ensure that the Distributors received an income for their work. DRM has, since the start of its use, been getting, a lot of bad criticism from the users of the software protected by DRM. The main function of this paper is to describe the creation and development of DRM by analysis of the vision of different groups on this phenomenon. The main questions are as follows, is it possible to define the very reason for why DRM was created and if so, can its development through time be defined too? What differences in opinions are there when it comes to DRM, counting the two major groups of creators, sellers, distributors (referred to as distributors) versus individual users (referred to as consumers)? In what way will the research results suggest that the future DRM will develop?The development has gone from solving puzzles in a handbook to start the game each time the user wants to play, to serial numbers that is needed during the installation of the game.

Requirements management is an important part of the software development process. The success of a project may depend on how this is handled. Even though several research studies indicates that more attention should be paid on non-functional requirements, the primary focus in practical projects still regards identifying functional requirements. Especially the prioritization of the non-functional requirements has been proven to be of great importance for the success of a project.This report investigates basics in agile requirements management involving opinions from experts from a software development company. This is done with help of existing literature and interviews with key actors involved in prioritization at the company.

This thesis considers the development of the software for an, newly developed, embedded real-time control system, based on a Periferal Interface Controller (PIC). The control system is developed to be used for several different applications. In this thesis work, software for two different applications are developed. The first task is a time controlled system, while the other task is implementation of aPI-/PID-controller. A user interface is also developed and implemented.The time controlled system is an automatic horse feeder, which is used for feeding horses at certain predefined points in time.