The production of cheese is in continuous development with objectives to in-crease productivity, achieve changes in shelf life and functional properties of the products. One concept in the development is to substitute milk fat with vegetable fats and oils in the manufacture of cheese. The objective of this study was to investigate effects on cheese yield and cheese quality of 4 different semi-hard analogue cheese products produced by substituting milk fat with vegetable fat, each analogue cheese with a specific mixture of vegeta-ble fat. As reference a cheese produced with anhydrous milk fat was used. The yield and recovery of fat and protein were determined by recording the weights of each cheese direct after press and after 20±2 days of storage and analysis of the composition of the cheeses after 20±2 days of storage. The cheese was fur-ther subjected for texture profile analysis in a TA-XT Plus Texture Analyser and analysed with Differential Scanning Calorimetry (DSC) to examine whether the fat behaves similar in the cheese as in pure form in respect to its thermal properties. The cheese yield was not significantly different when using different fats. Differ-ent amounts of water were absorbed during the water cooling.

This report describes honey, its origin, properties and effects on human health. Honey has been used for a long time in most civilizations and apiculture is an important activity sector in many parts of the world. The trend is an increase in honey production but a decrease in the number of beekeepers in Sweden. Honeybees live in a highly developed society with a strong hierarchy and a well organized distribution of the tasks. They visit a broad spectrum of plants and collect nectar to store it as honey.

Areal is one of the major players in the Swedish market for real estate brokerage of agricultural properties and related additional services. The purpose of this report is to give a better picture of the needs for additional services of property purchasers of Areal. Add-on services are the type of counseling you may need to achieve good economy on an agricultural property. Through a survey of property buyers of Areal information has been collected and compiled. A very good response rate was obtained and the material seemed reliable as it reflected the population in general.

Saab Aerosystems has a long tradition and a lot of competence in the field of flight simulation. Their ambition to broaden the market horizon has led to a discussion about also selling vehicle simulation solutions, both for military and civilian use.The aim of this thesis is to investigate the driver?s experiences of the accelerations he or she is exposed to whilst driving in rough terrain. The results may be used as a basis for future decisions and can act as a platform for the construction of an effective simulation model.To investigate the driver?s exposure of acceleration, some kind of dynamic simulation is needed.

The Swedish building stock accounts for nearly 40 percent of the total energyconsumption in the country. Properties built today are likely to last for 100 years orlonger. This places high demands on long-term and smart energy solutions that willkeep the future Swedish building stock energy consumption at low levels. This thesishas focused on examining how the energy performance of buildings is affected bydifferent choices of window types in different cardinal directions. The objective wasto obtain a basis for recommendations on how window properties can be optimizedfor different types of buildings and orientations.

This study is commissioned by the Swedish University of Agricultural Science (SLU - Department of Forest Resource Management) in coorporation with Sveaskog and Vilhelmina Norra Sami reindeer herding community. The purpose of this study is to analyse movement patterns and habitat use of reindeers during two winter seasons (2005/2006 and 2006/2007) in areas affected by forestry activities such as clearcutting. This study examines the possibilities of analysing information from Reindeer husbandry plans and forest variable data from kNN and SMD, in relation to GPS collar points from reindeers by using Geographical Information System (GIS). Lack of knowledge and understanding between the reindeer industry and the timber industry has often led to heated debates. The possibilities of using this type of technique are very interesting and could increase knowledge concerning land-use issues to different resource users. The main results from analyses comparing SMD, kNN, data about clearcuts, and GPS collar points from reindeers indicates that clearcut areas, younger forest, coniferous forest on lichen-dominated areas and areas dominated by pine was preferred by reindeers during the winter period.

This is a study on winter groups, ?siida?, of semi-domesticated mountain-migrating reindeers that move to lichen pastures in the lowland boreal forests during winter. The aim of the study was to determine reindeer habitat use in their winter ranges in a managed forest landscape. The reindeers use of three different types of forests was determined, 1) 100-130 year old, 2) 20-40 year old forest and 3) clear-cut areas. All sites were dominated by Scots pine, Pinus sylvestris, and had the same types of ground vegetation.

The aim with this study was to investigate the effects a change of manufacturing process would have on the mechanical properties of drill bits made of a WC/Co composite used for stone cutting. The method used today is sintering, where the material is heated in a conventional sintering oven. The other method was microwave sintering, where the material is heated by radiation in the microwave region. Also an investigation of the manufacturing cost were made.The main difference between the two heating methods is that the conventional way is a rather slow process and the microwave method is very fast. The material is also heated homogeniously in the method with mirowaves, aposed to the case with the conventional sintering where the material is heated from the outside in.This makes the material harder and more wear resistent.

The price of Swedish forest properties has gone up by 77 percent during the past five years. Amongst private forest managers the high price level signals optimism and confidence for the future. Many forest owners manage large capital in the forest and a planned economy is to a larger extent demanded to achieve a positive economic result. Forest is long-term and to maximize a single year without planning for the years to come results in less optimization of the parameters available to achieve a favourable economic result. This case study investigates the investment of two forest properties situated in Götaland. The management of the forest has been planned for both properties during a period of ten years.

Ternary codes for unequal error protection is a part of a communication system where different parts of the information to be transmitted can receive different amount of error protection. There are a lot of applications where the channel conditions fluctuate so that reliable or acceptable communication can not be guaranteed. Regardless whether the fluctuations of the channel are intentional or not the idea is to let the coderate decrease so that the error correcting capability can increase for the part of the information to be more protected. By using the support, the nonzero positions of the ternary code, a new binary code can be extracted with properties different from the ternary code in the sense of cardinality and minimum Hamming distance. When the channel conditions are good the receiver decodes the message using ternary decisions and receives all information included in the codeword.

The need for snow-free surfaces at squares, bus stops, platforms, car parks and sports facilities increases and at the same time energy price rise and the environment is becoming a hotter issue. The construction of the ground heating systems often lack thermal insulation under the heating pipes, which means that the heat from the pipes not only warm up the soil surface but also heats the surrounding soil. The insulation also has more features, by insulating the risk of frost damage is minimized. The goal of this report is to demonstrate the large heat loss and energy costs in the absence of insulation under the heating system.The report begins with a scientific way to study and treating the soil heating system uses, and the theory involved. Furthermore it also deals with different routing principles of heat pipes depending on the facility.All calculations are made with so called finite element method (FEM), in COMSOL Multiphysics 3,5a, where models are created with different conditions.

Today we can create digital 3D models which can be realised almost instantly through production methods such as 3D printing and computer controlled milling.What if this same technology could be applied to the development and construction of terrain parks?With snow as the material tools could be developed using similar principles to design and sculpt the surface, only on a larger scale.How would terrain park designers adapt their process to use this new technology? In this Industrial design thesis I explore how the ideas of the terrain park designer can be expressed through such a system with focus on the designers knowledge and skill without the need to learn complicated 3D programs.Sketch, create, ride. .

The use of earth bricks in Scanian building traditionThe present work is concerned with the manufacturing and use of earth bricks inbuilt heritage in the south Swedish province of Scania. The first part of the studyprovides a thorough description of the traditional use and manufacturing of earthbricks based on relevant literature, archive material as well as interviews withinformants. This forms a basis for the second part of the study in which practicalexperiments on and tests with earth bricks where carried out. This involved themaking of traditional earth bricks of different composition. The new handmadebricks were compared with industrially produced bricks (extrusion bricks) and oldhandmade bricks.

The number of people of getting allergic symptoms is increasing and the reasons are considered to be many. The human have changed their habits and spend more time indoor. In combination with new building technologies where denser housing constructions and new materials this causes bad indoor climate contributes to a higher occurrence of allergiesThere are several courses of action to deal with this problem. One action is by choosing allergy-free interior surface materials. An allergy-free material emits low concentrations of harmful substances resulting in a great indoor air quality.

This thesis aims at determining the heat losses in a property vent stack and its roof valve. Upon request of a company, the vent stack is analysed for possible heat recovering solutions to be implemented, while relining of the drain system is executed and with a suitable payback time for the economic investments. The heat loss calculations are based on data for properties that are located in the Stockholm region, but also easy to change depending on the situation. The calculations are done on pipes made out of cast iron, which still is the most common type of drain pipe in Sweden, and these are the pipes that relining is usually made on. The calculations that needed to take several variables into account have been done in MatlabR2014a and the thermos dynamical properties that were used in those calculations have been extracted from EES.Three different types of heat losses in the vent stack have been taken into consideration in this thesis.