Hemp has been used for textiles for a long time in history until it became illegal to grow in many countries in the 1930s. It is interesting from an environmental point of view because it doesn?t need any pesticides and in most locations it doesn?t need any irrigation either, compared to cotton, which normally requires big amounts of both pesticides and water for irrigation. Hemp is a bast fiber, which means that the fibers are located on the bast of the stem (on the outer layer of the stem). Therefore they cannot be spun directly, they have to be removed from the stem first.

3D-modelling in AutoCAD This thesis is done in cooperation with LB-Hus in Bromölla, and have aimed to establish a digital AutoCAD model of one of the company?s house types and to find out what opportunities there are to do visualisations in the form of images directly from the programme. Modeling has been carried out so that the very construction of the house is included. Interiors and installations, with the exception of the ventilation system, have been left out in the model. The model has been created with solid models after a comparative study made between solid models and surface models to find out which option in this case was the easiest to handle and took up the least space.

Storm water is rain and melted snow that runs off, primarily from impervious surfaces.Future storm water management is facing the challenges of increased precipitation, asclimate changes, and increased areas of impervious surfaces due to the expansion anddensification of the cities. Impervious surfaces reduce the potential for water to infiltratein the ground leading to increased surface runoff and higher peak discharge.The runoff coefficient is closely related to the percentage of impervious surfaces andrepresents the maximum percentage of a catchment that can contribute to runoff. In thisstudy, the objective was to evaluate the weighted runoff coefficient for three differenturban types; apartment buildings, townhouses and residential areas and a comparisonbetween today and the 1970`s was made.The runoff coefficient was determined by manual mapping of the different surface typesin each area based on data in the form of orthophotos and aerial photographs. The surfacetypes that were mapped were asphalt, permeable areas, tiles, sand/gravel and roof.Tiles and sand/gravel were the most difficult surface types to map. In order to see towhat extent these categories influenced the weighted runoff coefficient a sensitivityanalysis was carried out and the runoff coefficient based on surface type was changed indifferent scenarios.The results of the sensitivity analysis showed that the surface types tiles and sand/gravelhad little impact on the weighted runoff coefficient which in mainly due to the fact thatthe percentage of these surfaces types of the total area is small.The result of the study showed that the largest change in the runoff coefficient occurredin residential areas where the increase in the percentage of impervious surfaces causedby new roofs in the form of porches and garages and from paved or tiled driveways.

AbstractIn November 2011 the Swedish Government announced that they were conducting an investigation to examine what impact the conversion of existing rental stock to condominiums could have on the development of the Million programme areas. The proposal of converting rental stocks to condominiums aims to help people living in these neighbourhoods to private ownership, while still allowing people who want to continue to rent their homes to do that. This thesis intends to investigate the effects of the proposed reform from a management perspective. The maintenance of the areas built during the Million Programme gets more neglected every year that passes. The majority of the housing stock is rental properties and extensive renovation of the surface layer, tribes and public spaces are essential in all Million programme areas studied. By transforming a portion of the housing stock into condominiums and by improve the living environment through renovations, these areas would be able to gets more attractive.

I Centralasien lever det utrotningshotade djuret snöleopard (Panthera uncia). Antalet vilda snöleoparder beräknas ligga under 7000 individer. Snöleoparden brottas med ett antal olika hot i det vilda, med risk att det leder till utrotning. Djuret jagas av tjuvjägare, delvis för sin fina päls, men också för att använda ben och tänder till medicin. Människans utbredning leder till mindre områden för snöleoparden att hitta byten på, samt att den dödas i vedergällning om den skulle anfalla boskapsdjur.

This degree project illustrates newsprint and waterless offset. A new news press was introduced at Drupa-00, Cortina from KBA, which is the first news press dedicated the waterless technique. With actual statistics from the company in question an investigation was made whether their production fits this press. It came out in the investigation that the production of the company, from statistics, fits this press very good. A table was made where different timeschedules were accounted for the new press, with semi- and full automatic plate changing for present and to be added papers.

The need for snow-free surfaces at squares, bus stops, platforms, car parks and sports facilities increases and at the same time energy price rise and the environment is becoming a hotter issue. The construction of the ground heating systems often lack thermal insulation under the heating pipes, which means that the heat from the pipes not only warm up the soil surface but also heats the surrounding soil. The insulation also has more features, by insulating the risk of frost damage is minimized. The goal of this report is to demonstrate the large heat loss and energy costs in the absence of insulation under the heating system.The report begins with a scientific way to study and treating the soil heating system uses, and the theory involved. Furthermore it also deals with different routing principles of heat pipes depending on the facility.All calculations are made with so called finite element method (FEM), in COMSOL Multiphysics 3,5a, where models are created with different conditions.

Över 90 % av betäckningarna inom Avelsföreningen för svenska varmblodiga hästen (ASVH) skedde med artificiell insemination (AI) år 2011. AI har många fördelar i avelsarbetet då hingsten inte behöver vara på plats när stoet brunstar, möjligheten att välja bland både nationella och internationella hingstar ger en stor valmöjlighet för stoägaren. I Sverige samlas sperma från hingstarna normalt sett tre gånger i veckan genom upphopp på en fantomhäst där ejakulatet samlas i en artificiell vagina. Trots mycket forskning är det fortfarande ca 20 % av hingstarna som lämnar spermier som inte lämpar sig för frysning. Innan nedkylning centrifugeras seminalplasman bort eller späds ut för att reducera inverkan på spermierna. Seminalplasman har positiv inverkan på spermierna vid naturlig betäckning men kan ha negativ inverkan på spermierna under lagring.

Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.

The effects of Reindeer mechanical damages on the planted regeneration of Pinus sylvestris and Pinus contorta. Semi-domesticated reindeer can damage young trees. In late winter reindeer rub their antlers against young trees. The aim of this study was to quantify those damages. This study covered planted objects from three different areas in northeastern Sweden.

Zakrisdal and the west coast region of Karlstad was at one time a protected area where the ammunition factory AmF Zakrisdal 1941-1994 was situated. This factory manufactured explosives for the Swedish armed forces and for export. In this context it is an interesting paradox that the production of ammunition, mines and armorpiercing grenades for more than 50 years has preserved the environment surrounding the factory.The factory is now gone and the production is moved to Karlskoga. Plans are being made to build housing for 3-4000 residents and other enterprises within the area. The area now stands before yet another change, most likely the most profound to date.The inspiration for this work comes from the economic historic Jan Jörnmark.

The EU-project HEALTHGRAIN has suggested a new definition for whole grain which allows a small part of the grain to be removed during processing. By removing the outer part or the grain the hygienic quality will increase but it is not clear how the taste and colour is affected. So therefore in this study three different debranning methods, peeling, pearling and polishing, which remove the outer parts of the grains have been used on common and durum wheat. The dietary fibre and ash content, as well as germination was analysed in untreated, peeled, pearled and polished grains. The decrease in dietary fibre and ash was higher in grains that had been pearled compared to those that had been peeled or polished.

Klimatologiska förändringar har en direkt påverkan på glaciologiska system genom att förändra glaciärers termiska struktur. Subarktiska Skandinavien har upplevt en klimatologisk uppvärmning sedan 1980-talet och Tarfaladalen har under samma period uppvisat en ökad vintertemperatur med 1°C. Ökade vintertemperaturer medför förändringar i glaciärers temperaturfördelning, då högre temperaturer ger en längre smältsäsong. Storglaciären i Kebnekaisemassivet i svenska Lappland har en polytermal temperaturfördelning med ett kallt ytskikt i ablationsområdet. Det kalla ytskiktet har förtunnats med 22% sedan slutet av 1980-talet och då ingen ökad sommarablation har kunnat konstateras kan den ökade vintertemperaturen vara en indikator för att isyttemperaturen är styrande för det kalla ytskiktets bevarande.

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

Grenrören i en motor utsätts för stora termiska och mekaniska belastningar, vilka gör att grenrören ofta spricker. Idag kan inte sprickbildningen fullständigt uttydas ur beräkningarna, syftet med arbetet är därför att se om dessa kan förbättras genom att använda en mer avancerad krypmodell än den som används idag.Ett förslag till krypmodell har tagits genom att studera ett antal i litteraturen funna modeller. De som valts ut är modeller enligt Norton, Bailey-Norton, Marin-Pao, Picket och Findley. Parametrarna i de olika modellerna har bestämts genom kurvanpassning av enaxliga prov på de aktuella grenrörsmaterialen. Resultaten visar att modellerna enligt Marin-Pao, Picket och Findley alla kan beskriva mätkurvorna nästan exakt.