Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

This study examines the background and nature of the credit default index swaption (CDIS) and presentsrelevant methods for modelling credit risk. A CDIS is a credit derivative contract that gives the buyerright to enter into a credit default index swap (CDS index) contract at a given point in time. ACDS index, in turn, is a multi-name credit default swap (CDS). Within the eld of research, thisthesis identi es the CDIS pricing models presented by Jackson (2005), Rutkowski & Armstrong (2009)and Morini & Brigo (2011) as the most recognized and developed. These models are evaluated byreconstruction in a numerical software environment.

This report is written on commission by WSP Acoustics. The report studies the outdoor sound levels on school yards in Stockholm. The questions given by the company to be answered was what are the actual sound levels at diffrent school yards with low traffic noise and how can you construct a facade element that reduces the sound level from the outside and meet the indoor requirements. Mesurements for four hours was done at eight schools set north and south of the city centre. The measurement period included one school break and one lunch break.

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.

Real estate financing is one of the key figures for financial success and fundamental to asuccessful business. Funding will come in several different ways, from existing cashflows andassets to new capital requirements which are aimed at different markets.These markets are constantly changing and since the recent financial crisis, there have beenadjustments and austerity measures which led to that the banks have become more restrictive intheir lending.The real estate industry is characterized by both long-term and short-term thinking that ischaracterized by a solid continuity. Our thesis discuss how the demand is in the real estatebusiness and how mature the Swedish market is for junior financingwith focus aroundmezzanine debt and where are we headed in the near future.We've reached out to the key players in the industry on both the buy and sell side of real estatefinancing but also people between lenders and borrowers that handles transaction advice. Tohave been able to implement the analysisa survey and simulation of an investment calculationwas created. This questionnaire was answered by many real estate companies with senior peoplethat had operational positionsmost associated with corporate commitments.

Syftet med detta examensarbete är att analysera nyckeltalen för produktionskostnaden som nyttjas vid investeringsbeslut i flerbostadsprojekt. För att kartlägga osäkerheterna innan investering sker tas kostnadskalkyler fram. Dessa kalkyler innehåller ofta flertalet osäkra poster då projekten är till stor del fortfarande på idéstadium och uppskattningar blir ett måste. Rapporten inleds med att riskerna, utifrån risknivå och konsekvenserna utav dem, definieras och analyseras. Följande presenteras Veidekkes önskade hantering av kostnadsriskerna och slutligen vilka möjligheter och hinder det finns inom dagens organisation för att uppnå dessa arbetsmetoder. Studien har baserats på kvalitativa intervjuer med representanter från olika yrkesroller, i olika projektskeden och från de tre olika svenska regionerna. Dessa intervjuer har visat på att de största osäkerheterna ligger i entreprenadkostnaderna, markkostnaderna och konjunkturens påverkan på bostadsmarknaden.

The objective of this paper is to estimate monetary and non-monetary costs for the huntercaused by deer-vehicle collisions in Sweden. These costs include losses in hunting value as wellas time and money efforts related to the handling of wildlife casualties. The calculations arebased on available statistics from 2004 on deer-vehicle collisions involving moose, deer, roedeerand wild boar and on telephone interviews with hunters involved in the tracking of injuredanimals. Altogether, the annual loss in hunting value for moose was assessed to approximately30 million SEK based on the 2004 accident statistics. For roe-deer and fallow deer, thecorresponding figure was approximately 56 million SEK and 1.2 million SEK, while wild boaraccounted for 1.3 million SEK, respectively.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

This master thesis has been performed at Sectra Communications AB in Linköping where they manufacture electronic encryption devices. In cryptology it is essential that an eavesdropper cannot find the plain text. To assure that a system is safe, all devices are thoroughly examined so that they don?t emit any secret information, so called Compromising Emanations (CE). This is done by comparing the secret signal with measured signals on the screen of an oscilloscope, a process that is very time consuming and furthermore, the risk of missing compromising emanations is high.

The aim of this study was to develop and psychometrically evaluate an instrument for measuring the impact from chronic pain on daily life. Traditionally psychometric evaluation is done with parametric methods even if the items are ordinal data. In this study the instrument to be developed is solely based on ordinal data, and the psychometrically evaluation is done with both traditional methods (i.e. parametric statistics) as well as with non-parametric methods. These two different ways of psychometrically evaluation are then compared with each other.

HiGtech är en projektgrupp på Högskolan i Gävle vilka konstruerar och bygger energisnåla tävlingsfordon. Ett av fordonen tävlar i Shell Eco Marathons prototypklass för bensindrivna förbränningsmotorer och drivs av en på högskolan konstruerad motor. Motorns effekt överförs till en kedjetransmission via en inköpt och modifierad centrifugalkoppling. Den nuvarande centrifugalkopplingen väger cirka 1,5 kg. Då en stor faktor för tävlingsresultatet är fordonets rullmotstånd, vilken beror av fordonets vikt, har målet med detta arbete varit att konstruera en specialanpassad centrifugalkoppling, vars vikt endast är hälften så stor som motorns nuvarande koppling.

The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.

Detta examensarbete är ett förarbete till en utveckling av en kalkylmodell för regionnät. Syftet var att undersöka vilka faktorer som påverkar ett projekts utfall samt att ge förslag på hur Linjemontage kan utveckla sin organisation och ett förslag på en ny tidrapport har framtagits, för att få en klarare bild av hur stor del av projektets olika delmoment verkligen tog, i förhållande till uppskattad tid.De faktorer som anses vara påverkande vid ett projekts utfall är markägare, som kan vara svåra att komma i kontakt med, och svåra att nå en gemensam lösning med. Även avbrottstider planerade enligt förprojekteringen vilka inte accepteras av elnätsägaren. Material som blir fellevererat och förseningar av leveranser. Fel i handlingar till exempel bygghandlingar och felaktig design av konstruktörer.

Ett undersöknings- och utvecklingsarbete för att lösa ett problem med att dränkbara pumpar i ett vattenavrinningssystem gick sönder med perioder på två år i genomsnitt, utfördes i samarbete med Cementa AB i Skövde. Orsak till pumpars haveri söktes och fanns vara bristande rutiner och kunskap om det underhåll pumparna krävde. För att lösa detta problem utvecklades riktlinjer för nyinköp av torruppställda pumpar för att möjliggöra kontinuerligt underhåll. Då möjligheter för placering av torruppställd pump saknades utvecklades ett pumpfundament för placering av torruppställd pump. Krav för utvecklingsarbetet togs fram i samarbete med Cementas underhållsavdelning och teoretisk dimensionering av dränkbara länspumpars dåvarande volymflödeskapacitet utfördes.

An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.