Along with rising energy prices and increasing awareness of environmental issues, the criteria for buildings energy performance have been sharpened through the years. Today, ?passive house? and ?low energy house? are commonly used phrases in the construction industry and is expected to become increasingly common in the future.For houses with well-insulated building envelope the importance of well constructed details increases when minimizing the heat losses. Examples of these details are floor-wall junction and window openings in the wall. In such connections thermal bridges occur, which means that heat more easily is transported out of the building, compared to the rest of the building envelope.This report deals with detail solutions around windows and a comparison between a traditional slab and a foundation from Koljern consisting of foam glass.

Antalet personer som skadas bland golvläggare är ca 1.5 % per år och de skador som uppkommer är hand och knäskador. Det är inte den grupp inom byggindustrin som har störst skadefrekvens men endast en låg andel klarar av att arbeta ända till pensionen. Detta examensarbete har haft till syfte att ge en objektiv bild av arbetsmiljön för golvläggare, och ta fram brister och förslag på förbättringar. Det har gjorts efter önskemål från Golvbranschen Öst och Lars Johnsson som under lång tid sett problem i branschen. Jag har gjort intervjuer med golvläggare och leverantörer (se sidan 34) och observationer på arbetsplatser, tagit fram statistiskt underlag från arbetsmiljöverket över skador och gjort litteraturstudier på forskning inom området.Jag kom fram till att arbetsskador framför allt orsakas av dåligt anpassad skyddsutrustning och även golvmaterial levererade i för stora förpackningar. Golv levereras i längder som är svåra att hantera manuellt och väger ofta hundratals kilo. Därför blir hjälpmedel som bygghissar mycket viktigt för att förebygga arbetsskador, trots att dessa ofta plockas bort i förtid.

This degree project has been carried out by Niclas Andersson and Sebastian Zwahlen, students of the Innovation and Design Engineering Program at the Faculty of Technology and Science at Karlstad University. The project was carried out during the spring 2010 and includes 22, 5 ETCS credits.Initially the group had contact with the company Mavis möbler AB. Mavis gave the group the task of developing a new bedroom product. To assess the needs and problems of bedroom behaviors, an extensive questionnaire and several interviews were made. This became the starting point for further work.According to the results uncovered during the market research a vast problem was found with temporary clothing storage.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

A passive house in Norra Djurgårdsstaden drawn by Tengbom Arkitekter is going to be built. A shaft for airing is needed for a few apartments in the house.The airing shaft is designed for a few two room apartments in the house, which are not able to achieve satisfactory airing, as their outer walls are facing a single direction. The other apartments on the same floor are corner apartments. These apartments do not have the same difficulty with airing since they have their outer walls in different directions, with different pressures at the facades. The airflow in the airing shaft is supposed to be driven only by natural forces, by the sun. The purpose of natural driven forces is to achieve low energy consumption for the house.In this thesis, a design of the shaft for airing has been developed.Initially an open shaft for all apartments was analyzed.

This report is about accessibility in a station environment. Studies have been made about how an accessible building should be designed. Accessibility is an important issue when striving for a society with equality as the foundation. Sweden is one of the most accessible countries when speaking about the built environment. A result of prosperity and a well-managed democracy.

The Swedish government has declared the year of 2006 a special Year ofMulitculture. This has inspired me to look for similarities and differences allover the world, especially the use of rug carpets.During travelling to Indonesia and a visit to the sister of the Sultan ofYogyakarta, I experienced a pleasant moment drinking chilled lemonade. Wewere all sitting on carpets on the floor. To sit on, and get together around acarpet, is an excellent function which we don?t do in the western world.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

I samband med att intresset för att bygga högre trähus har ökat så krävs nya lösningar för att t.ex. kunna möta efterfrågan på stora öppna ytor och långa spännvidder. Träbjälklag med lång spännvidd har dock oftast svårigheter med att klara kraven på svikt och vibrationer. Ett nyutvecklat förslag på träbjälklag som förmodas klara dessa krav bättre än traditionella träbjälklag har varit utgångspunkten för detta examensarbete där syftet har varit att undersöka bjälklagets styvhet. Detta gjordes laborativt genom att bygga och testa en prototyp av det föreslagna bjälklaget och genom att en numerisk modell baserad på finita element metoden togs fram och användes för att studera hur olika parametrar påverkar bjälklagets styvhetsegenskaper.Bjälklagets design bygger på fackverksprincipen i primärriktningen och på balkverkan i sekundärriktningen.

The purpose of this paper is to examine how the arrival of class society is expressed in the social dance of high society during the second half of the eighteenth century. The study is based on the idea that culture and society develope in interaction; that changes in the economic, political and social life determine the cultural expressions as well. What I wish to examine is whether cultural themes from the developing bourgeois culture ? individualism, to be precise ? is expressed in the social dance during the second half of the eigthteenth century. // The study shows that public balls definitely gave people a chance to show off on the dance floor in spite of social rank.

Authors: Linda Olsson & Dennis A?stro?m Title: A journey of discovery on the third floor ? A case study in how juvenile agents in the municipality of Kalmar communicate with its young people Level: BA Thesis in Media and Communication Studies Location: Linnaeus University Language: Swedish Number of pages: 60Introduction: The participation amongst young people regarding political, democratic and society related questions is through an investigation confirmed not being high enough. Within the municipality of Kalmar, juvenile agents work as a link between young people and the opportunities that the municipality provides. To create this link with young people, communication is essential.Purpose: The purpose of this paper is to create an understanding of how the juvenile agents work in order to create and maintain communication with young people. The purpose is also to evaluate the result of the information campaign they executed in 2011.Methodology: For this paper we had a hermeneutic approach with an inductive viewpoint.

There are two species of voles that cause damage in Swedish fruit production: the water vole (Arvicola terrestris) and the field vole (Microtus agrestis). Both species make the most damage during the winter season. The water vole makes subterranean burrows and cause serious damage by gnawing on the tree roots. The field vole seldom makes burrows and gnaws the bark at the base of the tree trunk. In recent years there have been several reports about increasing vole damage.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Today there is an increasing market for businesses concerning horses, and since we are already running such establishments we sort of speak already have a finger in the pie. Due tothe increasing competition and demands, new and more practical constructions have become a necessity. In doing this project I wanted to make a comparison between having a stable integrated with a manege and having both constructions kept separate. I wanted to compare different layout and make an estimate of costs to see which solution would be less expensive and better with regard to working environment. I will further also deal with different ventilation-systems andlight transmissions.