Sök:

Sökresultat:

572 Uppsatser om Skill mapping - Sida 2 av 39

En utredning av tekniken "mobile mapping" i kommunal verksamhet

This thesis work is intended to analyze whether the municipalities has a need for the new technology of mobile mapping.Mobile mapping consists of the technologies of laser scanning, photographing and positioning of streets and roads in city environment and in the countryside. When these technologies are operating together a georeferenced three-dimensional image model is created, which has specific coordinates that states its position on the surface of the earth. Thanks to the laser scanning process even measuring can be performed in this model.The municipal sector consists of many different departments which use visual spatial information. These departments are an interesting target group for this system. Specific departments within the municipal sector, which we considered were the most suitable, have been selected.

Kartläggning och visualisering av riggkonstruktionsprocessen : Fallstudie från Scania

Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

Layoutgenerator för serie/parallell-omvandlare

I digitala kretsar kan både bit-parallella och bit-seriella interface förekomma.T ex kan en integrerad digital krets (IC-krets) internt använda sig av bit-parallella aritmetiska kretsar medan dess kommunikation med andra integrerade kretsar sker bit-seriellt. Genom att använda seriell kommunikation mellan IC-kretsar kan antalet ben på kapslarna effektivt begränsas.Detta examensarbete gick ut på att göra en layoutgenerator för generering av en parametriserbar serie/parallellomvandlare och en parallell/serieomvandlare. När en krets använder sig av både bit-seriell och bit-parallell representation av data behövs dessa för att omvandla mellan formaten..

Energikartläggning av avfallsförbränningen i Uppsala

Vattenfall Heat Uppsala runs the waste incineration plant in Uppsala, which produces district heating, process steam, district cooling and electricity. Vattenfall Heat Uppsala has decided to introduce an energy management system with the aim to increase the energy efficiency of the plant. The basis in such a system is to make an energy mapping.In this thesis an energy mapping has been performed at the waste incineration plant with the aim to identify and determine the size of energy flows. The investigated energy flows are used fuel, produced and used steam, produced district heating and cooling. Also the use of electricity to run the processes has been investigated.

Tesselering och Displacement: Ökad realism inom realtidsgrafik

Optimering är ett ständigt problem att brottas med som inom spelbranschen. Endatorgrafiker som arbetar med spel ska inte bara skapa så estetiskt tilltalandemodeller som möjligt utan måste även få dessa att fungera tillsammans med detekniska krav som ställs utav industrins spelmotorer och hårdvara.Tesselering och displacement mapping är ett exempel på industrins olikatekniker för att ge spel en mer realistisk rendering genom att förbättra siluetter,ge mer korrekta detaljer och samtidigt avbelasta tunga beräkningar från CPU tillGPU genom att utföra geometrins polygonhantering på grafikkortet.Tesselering och Displacement Mapping har börjat öppna upp nya möjligheterför hur moderna spel kan se ut och som datorgrafiker så måste du kunnaidentifiera när, var och hur dessa tekniker bör användas.Detta examensarbete går igenom modellering, bakning och användning avdisplacement mapping på tesselerade geometrier inom en rad av grafiskaanvändningsområden med hjälp av ett par enkla tester i hopp om att göra digsom läsare redo för att skapa realistiska modeller..

Pedagogers erfarenheter av att arbeta med ett kartläggande verktyg : En studie från en gymnasiesärskola

The purpose of the studyfocuses onhow teachersatan uppersecondary school, studentsin the autismspectrum,describetheir experiencesof working withmappingtools, Nylander(2012).Inmy research questionsIstarted fromthe teachers? descriptions of their experiences of mapping procedures, if the outcome ofthe mapping hasinfluenced theteachers'educational work and ifmappingcould contribute tothe visibilityandclarification of the student´s functioning in aschool context.As the study is based on five interviews in which teachers reflect on their experiences from the tool of mapping, the socio-cultural perspective where learning takes place through interaction with the environment became a framework to build from. The method has been interviews based on a qualitative research interview. By using interviews, I was able to capture the diversity of the interviewees? experiences described from the basis of an interview guide.

Kartläggning och analys av scanias tillsynsprogram : Ett verktyg för förbättring

Scania intends to introduce a new maintenance program for their rolling fleet. Withthis new program Scania hopes to increase their competiveness and add furthercustomer value. This thesis report is a mapping of the current maintenance program,along with its problematic features. Furthermore the report intends to describe thenew program, Condition Based Maintenance (CBM) and the problems that Scaniamust deal with before they can implement it.The report compiles basic information on how a mapping should be performed.Further on it will describe some of the theories of LEAN and leadership. Which aretwo of the most important features in this thesis work.The work has been performed through visits in different workshops, whereinterviews have taken place.

Mappingmetoden och bildmaterialet Everyday Life Activities ? behandling av agrammatism hos personer med afasi av Broca-typ

This pilot study describes a therapy method for persons withBroca´s aphasia. This method is based on the mapping hypothesis (Schwartz,Saffran & Marin 1980). The mapping hypothesis is based on the assumptionthat agrammatism is caused by an inability to combine syntactic structurewith thematic roles. This study describes a combination of the therapymethod mentioned above and the Everyday life activities photo series (ELA,Stark 1992). The aim of the study was to investigate if therapy based on awritten sentence/picture format is a viable starting-point for future research.The therapy presented combined written sentences with pictures describingeveryday life activities.

Prestandajämförelse mellan shadow mapping och shadow volumes i Direct3D 10

Skuggor är centrala för hur människan uppfattar världen. Inom datorspel och andra interaktiva 3D-applikationer är det viktigt att underlätta förståelsen av scenen och det finns även ofta en stark vilja att skapa realistiska miljöer. Detta samt att skuggsättning är en komplicerad och prestandakrävande operation gör det till ett viktigt område inom realtidsgrafik. Vi undersöker i denna avhandling relationen mellan prestandan (renderingstiden) för de två populära metoderna för skuggsättning inom realtidsgrafik, shadow mapping och shadow volumes. Undersökningen avgränsas till två utvalda varianter av de ursprungliga algoritmerna.

Prestandajämförelse mellan shadow mapping och shadow volumes i Direct3D 10

Skuggor är centrala för hur människan uppfattar världen. Inom datorspel och andra interaktiva 3D-applikationer är det viktigt att underlätta förståelsen av scenen och det finns även ofta en stark vilja att skapa realistiska miljöer. Detta samt att skuggsättning är en komplicerad och prestandakrävande operation gör det till ett viktigt område inom realtidsgrafik. Vi undersöker i denna avhandling relationen mellan prestandan (renderingstiden) för de två populära metoderna för skuggsättning inom realtidsgrafik, shadow mapping och shadow volumes. Undersökningen avgränsas till två utvalda varianter av de ursprungliga algoritmerna.

Normal Mapping för Hårda Ytor : Photoshop och Maya Transfer Maps för Normal Mapping av icke-organiska geometri i datorspel

I mitt examensarbete har jag undersökt om det lämpar sig att använda en manuell metod för att skapa normal maps till icke-organiska polygonmodeller avsedda för datorspel. Jag har använt mig av Photoshop för att måla normal maps som jag sedan applicerar på lågdetaljerade modeller jag skapat, för att höja detaljgraden avsevärt. Då icke-organisk modellering inbegriper modeller som ska representera hårda ytor, och därmed inte animeras med deformation, så antog jag att denna metod skulle lämpa sig väldigt väl åt dessa ytor som ofta har extremt mjuka former och precisa vassare kanter. Min metod har varit att studera litteratur om Normal Mapping och hur man använder Photoshop för detta. Jag har sedan utfört praktiskt arbete för att utvärdera hur effektiv metoden är samt vilka fördelar den bidrar med. Jag går igenom teori för normal mapping som jag stödjer med hjälp av faktatexter och instruktions-DVDer i ämnet för att sedan redovisa metoden jag använt i mitt arbete. Jag avslutar sedan med en diskussion kring mitt resultat och redovisar vad jag kommit fram till genom mina experiment. Jag kommer fram till att Normal Mapping med Photoshop är mycket väl lämpat åt hårda ytor och även bidrar med optimeringar i arbetsflödet både vad gäller organisering, tidsåtgång samt kontroll över resultatet.

Value stream mapping i praktiken : En fallstudie på Light My Fire

Titel: Value stream mapping in practice ? A case study at Light MyFireAuthors: David Rydman and Tomas ÖnnemarMentor: Veronica Ülgen SvenssonExaminer: Åsa GustafssonBackground: Companies push their prices in today's markets to be competitive, which means that companies need to find ways to reduce costs while maintaining profits. (Cudney, 2009) According to Bergman and Klefsjö 2007, the basic rule of quality improvement says "there is always a way to achieve higher quality at a lower cost". One way is to improve a company's processes to get a more efficient flow and improvements that may cut costs. (Bergman & Klefsjö, 2007) Why it's important to look at the processes are that they often contain waste that can be eliminated.

Komplext arbete. En studie av handlingsutrymme och komplexitet inom arbetsförmedlares uppdrag.

The purpose of this study was to examine the narrative skill of sixyear-olds in terms of macrostructure and cohesion, and its relation tonarrative content, auditory attention, auditory short-term memory and threemeasures of word retrieval. A group comparison of macrostructure andcohesion was also performed between children with and without epilepsy.The material consisted of audio recordings of 44 children (18 with epilepsyand 26 from a reference group) retelling the story Nelli-sagan (Holmberg &Sahlén, 2000). No correlation was found between content and macrostructureor cohesion, but several between the latter two. Auditory short-termmemory and word retrieval without pictures showed several correlationswith macrostructure as well as cohesion. No differences in macrostructure orcohesion were found between the children with epilepsy and the referencegroup.

Arbetssätt kring värdeflödesanalys för tillverkning av marina båtmotorer på Volvo Penta

Volvo Penta has been producing boat engines since 1907 and are world leading in this seg­ment. They have today an extended range and also sell industrial power stations. Quality, safe­ty and environmental care are three core values for Volvo and together they strive to give their customers the right product with the right quality.Volvo has developed a production system named Volvo Production System, VPS, and one of the pillars is continuous improvements. Within this pillar you can find value stream map­ping, which is used to analyze the value stream through the process. This tool gives a wide perspective and helps to keep focus on the entire process instead of just parts of it.Volvo Penta in Vara has earlier done value stream mapping but without good results since they didn?t take set-up times and imbalances in account.

Värdeflödesanalys och förbättringsförslag på Pallco AB : Value stream mapping and improvement proposal at Pallco AB

This report is a study made at Pallco AB. Pallco is a subcontractor that is specialized on steel and aluminium components.The aim of the report is to show an improvement proposal that leads to a reduction of the storage and improve the flow through the production of one item that is a part of a product that Pallco manufactures.With the increasing competition from other countries who can manufacture with lower costs must Swedish companies try to make theirs manufacturing as efficient as possible and remove all waste. By using the tools of Lean Production it is possible to reduce the costs and increase the efficiency.The method we used is value stream mapping. A map of the present condition has been made and then different improvement proposal were discussed. A map of a future condition has also been designed..

<- Föregående sida 2 Nästa sida ->