Stone walls in agricultural land are incorporated in the general protection of biotopes. They are protected because they provide a habitat for endangered species. Therefore it is illegal to carry out proceedings in an area that is included in the protection of biotopes. In order to do that, exemption is needed which can only be granted if there are special reasons. The essay stipulates what these special reasons are.In an exemption errand the interest for nature conservation must be weighed against a public or a private interest.

Today's urban centers become denser, which contributes to higher demands on sound and noise. It is therefore highly relevant to build homes with good sound environment while maintaining living space. This thesis aimed to reduce the current concrete walls and see how the mass law affects the reduction index value and flanking transmissions. Handmade calculations were calculated according to the Swedish standard SS-EN 21354-1, where only air sound was calculated.Calculations we­­­re performed on wall elements with different weights and thicknesses, and compared with results from Bastian.In Bastian calculations of flanking transmissions were also made, this was made to see the impact of the flanking transmission when changing the mass per unit area. Mass law's impact was examined by flanking transmission and the result shows that they are not affected as long as the ratio between the thickness and the density remains the same.A questionnaire survey was conducted to determine the actual sound experience; this questionnaire was conducted on three concrete buildings in Växjö.

The purpose of this thesis is to investigate if vacuum insulation panels are a competitive alternative to traditional insulation.Vacuum insulation has been used as insulation in buildings in Germany and Switzerland for a few years. In Sweden the high-performance insulation material is mainly used in refrigerators, freezers and vacuum thermoses. The development is proceeding well and vacuum insulation is becoming more common in the construction industry. Since it is a relatively unexplored material on the market there are many flaws and problems with the material.The questions we have chosen to answer in this report include an increased knowledge of vacuum insulation, various problems that may arise when handling/installation and the pros and cons of vacuum insulation compared to standard traditional insulation.The methods we have chosen to use in this report is a literature study, interviews with various suppliers and manufactures and calculations to show the differences between traditional and vacuum insulation. Vacuum insulation is 5-10 times better insulation than standard traditional mineral wool insulation, mainly at the beginning of its lifetime.Vacuum insulation panels (VIP) have a service life of approximately 50 years, whereas traditional insulation has a service life of approximately 100 years.

This thesis within the field of Integrated Product development at the Royal Insitute ofTechnology, performed at Primary Development Dishcare at AB Electrolux, is supposed to finda solution to enhance the hygiene inside an Electrolux dishwasher. The outcomes of this thesisare functional prototypes to evaluate the efficiency of disinfection by the use of Ultra VioletLight and Ozone.The thesis has followed Electrolux Primary Development process, with delivarables andcheckpoints.Ultra violett light with a wavelength of around 264 nm penetrates through the cell wall ofbacteria and micro organisms and causes a molecular rearrangement of the cells DNA. Thisprevent the bacteria from reproducing and it is considered dead. Commonly used UV-C lampstransmits the wavelength 254 nm which is very close to the optimum for germicidal action.A competitive brand have reacently launched a dishwasher claiming to achieve greaterdisinfection with an UV feature. This dishwasher was tested during the thesis and proven tohave a very low effect on the hygienic result.Two prototypes were devolped and tested for UV disinfection of dishware.

The purpose of this study is to find out what the educators idea of educational documentations in ratio to childrens inclusion and impact in pre-school are, together with the child's own perception of the concepts of documentation. We proceeded from the following issues: What are the significance of educational work according to the teachers? What is the teachers idea of a childs impact and inclusion in educational documentation? In what way do the children have influence over, and inclusion in educational documentation? What are the childrens feelings of the documentations? In order to find answers to our questions, we used qualitative examinations consisting of seven educators and seven children from various pre-schools in Stockholm, and thereby, we have analyzed our results. As our theoretical frame, we used ourselves of Vygotskijs and Säljö's sociocultural perspective that is about "progress and learning", which is achieved by interaction and cooperation in a social context. The result shows that the aim of educational documentation is to reveal the childs development and learning, and also to involve the parents by putting up documents on the wall.

The main goal of this project was to develop some sort of a diverter for pipestransporting waste in a vacuum system. This unit was supposed to be both cheap andeasy to serve/exchange worn out parts. With a limited space to install the pipeexchanger, the challenge was to keep it as compact as possible without constructingbends with to small radius or to sharp angles as this would wear out the system a lotfaster than planned. The system was also supposed to be able to handle clothes andscrubs from hospitals. Having too much sharp edges or angles would tear the clothesapart.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

This degree project has been carried out by Niclas Andersson and Sebastian Zwahlen, students of the Innovation and Design Engineering Program at the Faculty of Technology and Science at Karlstad University. The project was carried out during the spring 2010 and includes 22, 5 ETCS credits.Initially the group had contact with the company Mavis möbler AB. Mavis gave the group the task of developing a new bedroom product. To assess the needs and problems of bedroom behaviors, an extensive questionnaire and several interviews were made. This became the starting point for further work.According to the results uncovered during the market research a vast problem was found with temporary clothing storage.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

 Inledning: Under 2000-talet har olika slag av bolagsskandaler uppmärksammats inom företags- och finansvärlden, som har kommit att påverka ekonomin och redovisningen en hel del. Bland dessa finns bland annat energibolaget Enron, telecombolaget Worldcom samt svenska bolaget Skandia. Effekterna av bolagsskandalerna är många och i värsta fall kan företagsledarna få handskas med fängelsestraff. Syfte: Syftet med studien är att granska begångna regelbrott i stora bolag samt jämföra de med varandra för att se vilka likheter och samband som finns kring bolagsskandalerna som uppstått.Teori: I den teoretiska referensramen beskrivs teorier om bolagsstyrning, Svensk kod för bolagsstyrning, den svenska modellen för bolagsstyrning, agentteorin samt Sarbanes Oxley Act. Metod: Insamlingen av kvalitativ data har skett via sekundär datainsamling, exempelvis via artiklar, tidigare studier, Internet samt böcker. Slutsats: Det finns tydliga mönster mellan de begångna bolagsskandalerna som har undersökts i denna studie. Ett av de dessa är att ledningen i de flesta fall håller i trådarna. Motivet till de flesta brotten ligger i grund och botten på att rädda bolaget från att gå med förlust eller till och med i konkurs, eller att leva upp till ställda förväntningar på exempelvis Wall Street. .

In 1998, 'the Naval Port of Karlskrona' was inscribed as a World Heritage Site by UNESCO and thus, it is equally protected as China?s Great Wall and the Pyramids of Egypt.The essay is a case study of Karlskrona, one of Sweden's most well planned cities, where famous urban planners and architects such as Erik Dahlberg and Nicodemus Tessin the Elder has been involved.Today, Karlskrona is a rather unknown small town in Sweden's outskirts, where population growth has been a problem. When Karlskrona was founded, in the late 17th century, Sweden was a major power. The Blekinge archipelago was in the middle of the Baltic dominion and Karlskrona represented a midpoint in the kingdom. Therefore, Karlskrona has a small town charm with the history and style of a cosmopolitan city.By initially studying how the town?s character of today is expressed, the history of Karlskrona is explored.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

Accessibility is today a topic of high current interest. It is a requirement for equality and a democracy question. By the year 2010, easy measured hindrances in all of Sweden's municipalities should be cleared away; this is stated in Swedish law. The physical accessibility to our public places is particularly important for functionally disabled people since it affects their possibilities to be outdoors and also their participation in society. When designing these places, it is difficult to find solutions that fit everybody, especially since good accessibility not only should fulfill all physical requirements of accessibility but also values of experience.

Syftet med detta examensarbete är att undersöka och jämföra två olika beräkningsmetoder när det kommer till beräkningar av väggskivor. Den ena beräkningsmetoden baserar sig på traditionella handberäkningar där anvisningarna i BBK 04 (Boverket 2004) och Betonghandbok Konstruktion (Lorentsen, Mogens, Cederwall, Krister & Östlund, Lars (red.) (1990)) följs. Den andra metoden baserar sig på finita elementmetoden, och utförs med hjälp av programmet Strusoft FEM-Design Wall. Med Finita elementmetoden delas konstruktionen upp i flera små delar, så kallade finita element, som sedan beräknas var för sig, och sedan sätts alla delarna ihop till ett resultat för hela konstruktionen. Två olika väggskivor beräknades, en solid väggskiva samt en väggskiva med ett dörrhål i. Vid jämförelsen på den solida väggskivan visade sig resultaten stämma väl överens med varandra.