The purpose of this Master thesis is to examine whether the term elasticity is relevant and functional to apply to public library organisations. Another aim of the thesis is to relate the term elasticity to public library organisations in a network society. Sociologist Manuel Castells provide the theoretical framework on the network society. Three investigations (meant to complement each other) in two Swedish public libraries seek to give answers to these questions.To be able to examine which areas of public library activity are elastic, I make a rough definition of what public library organisations consist of ? nine activity fields are identified using IFLA?s guidelines in combination with Swedish law of public libraries.

Idag går utvecklingen mot alltmer distribuerade IT-system där en grupp datorer kommunicerar med varandra. Detta gäller för sökmotorer, beräkningsintensiva miljöer och även för den svenska försvarsmaktens ledningssystem.För att systemen ska kunna kommunicera så flexibelt som möjligt vill man ofta att kommunikationen ska ske enligt standardiserade protokoll vilka är oberoende av datorplattform, programmeringsspråk och transportprotokoll. Ett koncept som kan användas för denna sorts kommunikation är Web Services vilket är ett koncept där meddelanden skickas XML-formaterade över valfritt kommunikationsprotokoll.För att möjliggöra utbyte av känsligt data som inte får nås av obehöriga måste kommunikationen stöttas av ett flertal viktiga säkerhetsfunktioner. En av dessa funktioner är användarautentisering vilket innebär att användarens identitet kan verifieras.För att möjliggöra användarautentisering kan digitala certifikat och asymmetriska kryptooperationer användas, denna typ av operationer är prestandakrävande varför ?Single Sign On? eftersträvas.

The aim of the "Green forest management plans" is to help forest owners to reach the environmental goal of the forestry act. But are they able to do that? Is it possible to plan preservation of species on single estates? How do single-estate-plans differ from a landscape analysis and how can the landscape approach be used in operative planning? This work was initiated to give an answer to these questions. This study was made in a landscape of 4200 ha in Östergötland county, south-eastern Sweden. A lanscape analysis was made and then compared to the Green forest management plans in the same area. The nature conservation areas (areas that were set aside to be managed with environmenatl goals) differed quite a lot between the two alternatives.

The aim of this study was to provide SCA Forest Norrbotten District with material to assist in their work towards decreasing the frequency of bucking splits in their saw timber logs. SCA Forest supplies the Munksund sawmill with pine timber. Periodically the sawmill experiences problems related to bucking splits in their logs. The purpose of this study was to find an available method to measure the occurrence of splits directly on incoming timber. The ambition was also to gain some knowledge about possible variations between different logging crews in terms of split frequency. If possible, this information could be used to investigate if certain crews produced more splits than others, and thereby making it possible to provide feedback to the logging machine operators. The study consisted of two major parts, a literature review, and a practical sawmill study.

To design new and high tech products the engineers rely more and more on computer based simulations to investigate the properties and behavior for a component or system.To verify these computer based simulations the dynamic properties for the components of the drivetrain needs to be verified. Therefore measurements of the stiffness and vibrations for the rear axle has been performed. This report show how the measurements has been implemented and evaluated, along with some interesting results for the rear axles properties.The static stiffness for the drive shaft along with the axle-gear has been determined. It is found that the stiffness for the whole rear axle is near the stiffness for the drive shaft, which means that the drive shaft becomes the dominant component of the system and affects the rear axle stiffness the most. The measured stiffness of the driveshaft is close to its theoretical stiffness.The stiffness for solely the hypoid-gear have been calculated using the stiffness for the rear axle and driveshaft, and thus has a range for the stiffness of the hypoid gear been determined.The backlash for the whole rear axle and for some individual components has been determined, where the backlash between pinion and crown-wheel has negligible impact on the total backlash.Measurements of the crown-wheel and pinion movements have been conducted, where the direction of movement is consistent with the theoretical direction of the forces.The vibration measurements show that the vibrations are more severe at certain rotational speeds.

Today there are many applications of digital terrain models (DTM) and the requirements of low uncertainty increases. Most of the DTM are produced with Global Navigation Satellite System (GNSS), terrestrial laser scanning (TLS), airborne laser scanning (ALS) and total stations. Guidelines for the preparation and verification of DTM are found in Swedish Standards Institute ? Technical Specifications (SIS-TS) 21144:2007 and SIS-TS 21145:2007. These were defined in collaboration between Swedish National Rail Administration, Banverket, and Swedish Road Administration, Vägverket, to satisfy the needs of requirement formulations in the production of DTM planning, design and construction. The purpose of this paper is to produce and control DTM over Åkermans kulle, located west of the University of Gävle, according to SIS TS 21144:2007 using GNSS with network-RTK, TLS and ALS.

The work that is the basis of this Master Thesis was performed on Scania´s group of cabdevelopment, and concerns the GPS-system in Scania´s trucks. Today, the GPS-systemconsists of an active antenna mounted on the roof of the truck. The antenna is connectedto the receiver with a coaxial cable.The purpose with this Master Thesis was to develop and evaluate a new GPS-system,where the information is distributed using a LIN-network. Today, each unit requiringGPS-information is equipped with its own antenna and receiver. This solution has beenthe most cost effective to this point.

The purpose of this project is to analyze earthing systems for houses. By practical measurements and theoretical analyzes consequences of possible faults, that can occur within the facility and in the low-voltage distribution network, is illustrated.  The reason for this project is that nowadays one has to arrange with a main equipotential bonding system for buildings. Apart from that, if necessary, bathrooms must be provided with a supplementary equipotential bonding system.The practical measurements verify that potential differences in facilities may be due to voltage drops in the PEN conductor between the origin of the electrical installation and the power transformer.Based on the theoretical analyzes of possible faults, it is considered that the requirement for  supplementary equipotential bonding systems for bathrooms in most cases can be questioned, when basic insulation, fault protection, residual current devise and main equipotential bonding system already provides an adequate level of protection.A PEN conductor loss may result in a situation where metallic parts attached to the equipotential bonding system starts working as earth electrodes. Equipotential bonding system may also increase the incidence of stray currents. If TN-C-S systems is provided with a local connection to earth a redundant system against PEN conductor loss is obtained.

The company Sol & Energiteknik wanted to examine the possibility to make a standardhouse totally energy independent. Based upon this I have, during the spring of 2007,examined the possibilities available at the market today through litterature studies, contactwith several companies and reading reports at the internet.The first thing to examine has been to determine the energy consumption for a standardhouse, and find out if there are better technologies to be used for energy conservation.My conclusion in this matter is that there are possibilities today for building a house moreenergy efficient.When I had reached the point at which my design for the house was decided, I also hadto choose the different products to use to produce energy as well as to store that energy.To produce heat and electricity to the house I decided to use a wind turbine and a solarwater heater.The most difficult part of designing a house that is energy independent is that theproduced energy must be stored somehow. Storing the heat is relatively easy beacuse theheat can be stored in a large water tank. The electricity is a bigger problem beacuse itmust be stored in batteries, which today are too expensive to be used in a standard house.In the future producing and storing hydrogen might be used to produce electricity, buttoday that technology is both expensive and not tested enough.My final conclusion is that a standard house can not be built to be totally energyindependent today, unless it is very expensive to connect the house to the electricitynetwork. As an alternative solution I came up with a proposal for a house which isconnected to the electricity network and have some amount of own produced energy.This house prooved to be a good investment if you choose to build it today, and it couldbe a very good investment in the long run beacuse energy prices increase every year..

To identify the exchange and adaptation that takes place in the business relationship between electricity suppliers and electricity customers and analyze how these factors affect the strength of the relationship.The investigated concepts create synergies. The strength of the business relationship in the current situation is dominated by weak reciprocity in adaptation and an inefficient exchange of information with low frequency..

Background: Traditionally defined boundaries and borders between organizations are at present being re-evaluated because of new and tougher demands. Today we can see a trend where these boundaries are being lowered or even eliminated when organizations choose to co-operate instead of compete. Purpose: In order to create an understanding for the partner selection process in the newly founded joint ventures between the companies which are building the Swedish 3G Network, the determining factors are being studied. Delimitation: The studies companies are co-operating as network operators but are at the same time competing as mobile operators. This relationship is in the literature described as co-opetition, which will not be investigated in this paper.

The public transport network in Täby commune consists currently of two types of bus line of whichboth belong to the category of feeder lines. The first type terminates at Danderyds sjukhus and feedsto the subway whereas the second type terminates at Täby centrum and feeds to Roslagsbanan, asuburban narrow-gauge railway system in northern Stockholm. The trunk bus line that connectsgreater parts of the commune with Danderyd is the ring line 604 and goes both clockwise (604H) andcounterclockwise (604V). The main negative aspect of this structure is the complicity in incorporatingit timetable-wise with other bus lines that share the same route, such as through Enebyberg.The goal of this project is to investigate the possibilities of splitting ring line 604 and connecting theends to two different bus routes that terminate at Täby centrum today. Apart from easing thecoordination with other bus lines through Enebyberg, the extension also creates new directconnections from various areas in Täby to Danderyds sjukhus.

This thesis includes a review of scientific studies of tree injuries following mechanized thinning. Interviews have been made with drivers of single grip harvesters and forwarders in forest thinning and a number of essential factors have been identified as the most important to take into account in order to minimize and/orprevent injuries to stems and roots of remaining trees..

In 1993 the internal market within the European Union was formed and ensured free movement of goods, services, capital and people. This led to the removal of trade barriers between members of the European Union. When opening up for competition, price differences between countries decreased and more jobs were created. A single currency was introduced by eleven countries in 1999 with the goal of reducing transaction costs, eliminating exchange rate risk and to further simplify trade. In 2001 Greece joined the collaboration and introduced the euro.

Sweden is the country in Europe that receives most applicants from asylum seeking unaccompanied children. The majority of all unaccompanied children are boys and the two biggest sending countries are Afghanistan and Somalia. There is however a big difference between the proportion of unaccompanied girls between the two countries, Somalia with a big proportion of girls and Afghanistan with a low proportion of girls. Previous research has shown that there is a big knowledge gap about unaccompanied girls? migration.