Benthic diatoms are used in Sweden for monitoring water quality in run-ning water; the method is also frequently used in other countries in Europe. One of the problems of the diatom method is the need for sedimentation of the fresh sample, to be able to decant the over standing water and add alco-hol as a preservations solution. To my knowledge, no results have been published about how long the settling time must be to ensure that the ben-thic diatoms really have settled down to avoid a loss of the diatoms when decanting the over standing water. The aim of my investigation was to improve the Swedish method where the benthic diatoms are used for water quality monitoring. I wanted to find out the appropriate time necessary to wait until all diatoms have settled down before decanting the over standing water. First, fresh benthic diatom samples were taken in the river Fyrisån and the lake Mälaren on different days. After arriving in the laboratory, I waited three different times (30 min, 60 and 180 min) for the diatoms to settle.

AbstractThe research project Liberation, supported by the European Commission under the Environment and Sustainable Development Programme (Fifth RTD Framework Programme) aimed at developing a decision support system for ecological risk assessment of contaminated sites has proposed a tiered system including the triad method. This method integrates contaminant chemistry and bioavailability analyses with observed ecotoxicological effects in soil and groundwater. In this study the triad method was used to perform a risk characterization of a former surface treatment and metal industry, now used for the student union buildings of the Mälardalen University in Eskilstuna, Sweden. On the site, high concentrations of copper, zinc and nickel have been detected in the soil in a preliminary investigation of contaminant levels with XRF. For performing the risk assessment of the site according to the triad method, contaminant bioavailability, soil metal concentrations and soil toxicity were determined and an ecological assessment was carried out on four selected soil samples (one reference soil and three samples with low (B), medium (C) and high (D) contaminant levels). Contaminant bioavailability was measured through leaching (ISO TC 190/S7) and biouptake tests (DGT).

In this work we have compiled results from various studies concerning medical conditions that may possibly be avoided by castration and the effects that may occur after castration of the healthy bitch. The work is a literature review but it also includes a summary on the age recommendations for castration of the healthy bitch, castration before or after the first heat and the castration method most commonly used of ovariohysterectomy and ovariectomy. The summary is based on a questionnaire answered by personnel from 20 veterinary clinics and animal hospitals evenly distributed throughout Sweden.The summary showed that ovariohysterectomy was the most common method of castration and the recommendation in age ranged from 6-12 months. Regarding castration before or after the first heat 75% of the veterinary clinics and animal hospitals answered that they recommended castration after the first heat. Literature study shows that there are both advantages and disadvantages of castration of the healthy bitch and that it therefore is important that each bitch get a personal and individual evaluation before a decision is taken concerning a castration..

This report is a commission from the Care Unit of Hässleholm municipal. The purpose is to illuminate what is distinguish for contact persons at sheltered housing in the Municipal of Hässleholm? It contains three questions at issue. What are the expectations of the contact men? What information is given? How is communication between the professional categories working out?The report also contains a background with a brief Swedish history in care of older people.

Aim: The purpose of this study is to show models from the literature which can underlie appraisal and development in the real estate business of Gavlegårdarna.1. Gavlegårdarna should be able to use the study in their work with quality assurance off their services.2. Company?s in real estate business and other students should be able to use the study for an overview of quality models.Method: To collect data I chose to use a qualitative method based on the hermeneutic research method. The collected data was a result of literature and interviews.Result & Conclusion: From the literature there are two models that are suited for analyses of quality, that is the Housing quality model and the Gap model.

The purpose of this study is to analyze how customer oriented businesses can use loyalty programs to create loyalty and how loyalty can be increased. We have in this study chosen to refer loyalty program to the loyalty program that belong to the company Jula AB. Our study is written in a qualitative method. In our method, we chose to interview people in Jula organization to get a business perspective to our study. We have also chosen to assemble a focus group of Jula-club members to also get a customer perspective on the subject.

Stunning of pigs at slaughter constitutes of primarily two methods; carbon dioxide and electricity. Both methods have advantages and disadvantages from an animal welfare point of view. The purpose of this study is to compare different methods of stunning pigs from a welfare point of view. Questions included in the study are 1) What differences are there, from an animal welfare point of view, between CO2 and electricity as methods for stunning pigs? 2) What alternatives are there to the methods currently in use? 3) Which method for stunning pigs is preferable from an animal welfare point of view?This report is a literature review.

In this thesis tests has been performed on the pull strength of screws glued into glulam beams.The experiment is based on the already approved method whereby the diameter of the drilled holes is the same as the screw outer diameter of 1 mm or bigger. The screws strength class shall not be less than 4.6 (EN ISO 898-1:1999, 1999).The difference in the experiments that were performed where that the drilled diameter were 1 mm smaller than the outer diameter of the screw so that the screw thread was worked into the wood.In the tests the gluing where made on M8 glulam beams. The screws where drilled at and angel of 90°tangental to the fiber direction with a diameter of 7 mm. The gluing of the screws where made in three different depths and where later exposed to pulling forces. The results showed both pulling breaks and screw breaks when they reached their maximum capacity.

This report discusses a method to detect divers in harbour environments usingpassive acoustic detection. The goal was to achieve as high detection as possiblewithout having too high false alarm rate. A short execution time was also desirable.By using the characteristic of an inhalation a band-pass filter was applied to the signalto improve the signal to noise ratio. After the filtering an energy estimation of thesignal was made. This energy estimation was later used in a frequency analysis, whichcould tell us if there were enough energy in the frequencies that correspond to adivers breathing frequency.

Abstract Title: Yes logo! What defines a good logo? Authors: Fredrik Dahlin and Vladimir Zunkovic Supervisor: Klaus Solberg Söilen. Department: School of Management, Blekinge Institute of Technology. Course: Bachelor?s thesis in Business Administration, 10 credits.

AIM This report studies the Swedish vintage store company Myrorna from a branding perspective.METHOD The study has applied the qualitative method where four personal interviews have taken a fundamental ground. The four respondents are taken from different professionals and from different positions by the reason that the brand would be based on a fair assessment. The study is obtaining data that further was collected from the library of University of Gävle, the articles from Emerladinsight.com and remaining pictures- and text materials is taken from the organization Myrorna. The theoretical material have been adapted on the brand Myrorna and then been used to analyze the empirical part. From the general impression that portrays the brand the researcher leads the discussion.RESULT AND CONCLUSION The result shows that the brand Myrorna in some extent do not fulfill the image the brand in the media mediate, between the illusion and the reality there is an empty space according to the research.

This case-study examines the correlation between young men and democratic instability in group discussions with two analyzing methods in one. One part of the method used is deliberative democracy which aims to explain how democracy works within the frames of discussion in ordinary citizens groups. In this study the citizens is upper level secondary school students. The other part of the method used is the theory pulled by many scholars lately, the demographic impact on democracy. With these two combined in one this study compare the theory of young men as more active in political violence and as a destabilising factor of democracy on country-level with the results of the study in deliberative democracy in small group discussions.

Abstract Integrated mental training is a method that entails a systematic and long-term training of mental processes (thoughts, images, emotions) that aims to enhance performance as well as gratify feelings and improve thought processes. This training develops an alternative system of control by using substitute state of consciousness and self-hypnosis. The method is concerned with both mindfulness and performance approaches, which is crucial in order to feel and function better. The intent of this study is to highlight the experience of the different steps of integrated mental training to gain an understanding of how, where, and when changes occur. To achieve the objective of this study, a qualitative empirical method was used.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

Abstract______________________________________________________________________Title:A study about creating understanding for different kinds of empowermentLevel:Bachelors thesis in Business Administration, 15 creditsAuthor:Fredrik LegovicSupervisor:Tomas KällquistDate:2014 - JuneAim:The main purpose of this study is to increase the understanding for different kinds of empowerment and how it affects the staff in the public sector.Method:The choice of method was based on the research aim. The method used to meet the objective was qualitative. The qualitative study was conducted with a hermeneutic basis, where individuals were asked to describe their experience of empowerment and how they feel affected of it. This thesis has a deductive approach, where existing theories dealing empowerment formed the basis for the design of interview substrate, which is then paired with the empirical evidence, based on this the conclusions was drawn.Result & Conclusion:What separates the different kinds of empowerment and how it affect the staff depends most of all on how the management chooses to communicate and share information with their staff.Suggestions for future research:A study regarding managers that works with different kinds of empowerment, and how that affects them, could be regarded as an interesting future research.Contribution of thesis:It shows that different kinds of empowerment affect the staff in different ways, which I made clear to the readers.Keywords:empowerment, thinking skills, relations and organizational - structure and theory.