In this final thesis two simulation models have been integrated. The simulation models are models of JAS 39 Gripen?s fuel system, software and hardware. The time consuming and costly work to develop software has made the department of fuel system to build two models in Xmath/Systembuild. The software model also simplifies the comprehension of how the software in the control computer of the fuel system works.

Detta examensarbete har utförts i samarbete med Löfqvist Engineering i Örebro. Uppgiften har varit att utföra en simulering av en stor automatiserad produktionslina som ska användas vid tillverkning av avgassystem till lastbilar. Utifrån denna simulering skall exakta cykeltider för produktionen bestämmas. Dessa tider kan sedan användas av Löfqvist Engineering för att verifiera tidigare uppskattade tider.Arbetet inkluderar en litteraturstudie om Lean Production och hur det fungerar ihop med automation. Det finns även med lite bakgrundsinformation om Just In Time, olika filformat och robotsimulering i allmänhet för att ge en bättre överblick av ämnet.Programmet som har valts för att utföra simuleringen är Tecnomatix Process Simulate och den inbyggda Line Simulation modulen.

Nowadays, a lot of resources are spent on developing systems that will make it possible forvehicles to act autonomously, and make them more effective. One of the projects that isworking on this is the Gulliver Project. Gulliver has constructed a number of miniaturevehicles equipped with various sensors, to use as a physical testbed for autonomousdriving. One big disadvantage with this method is the long iteration time that occursduring the development and testing of a new software.This project has improved this process by developing a system architecture of a virtualtestbed where it is possible to Simulate autonomus vehicles that communicates throughany type of wireless network. The testbed has made it possible to Simulate autonomusvehicle systems that with a reasonable margin of error, acts like the system would actin a physical test.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to Simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

This report describes the building of a computer model that makes it possible to Simulate the thermal climate in a greenhouse. The computer model is built on the physical theory of heat exchange that occur in a greenhouse, such as radiation and convective heat exchange. The model also includes the heat storage that is active in a greenhouse.The computer model is used to Simulate the thermal climate in a greenhouse under three periods, winter, spring and summer. It also investigates which effect a concrete wall has on the thermal climate in a greenhouse. The purpose of putting a concrete wall in the greenhouse model is to investigate the possibility to store heat during the day and then use this heat when the temperature drops during the night.The result from the simulations shows that a concrete wall levels the big difference in temperature that normally occurs under a day in a greenhouse.

To give a realistic impression in a driving simulator for nighttime driving, there are many challenging aspects to consider. One of the most important aspects is the illumination caused by the headlights of the own vehicle. To give a realistic impression there is the need to consider the characteristics of the headlight in use to be able to represent main and dipped beam, but also to represent different models and types of headlights. Another important aspect is the dazzling effects caused by the light cast by other vehicles upon the driver. These effects are not only important to give a realistic and visually appealing simulation, but also to Simulate blinding effects which may affect the drivers ability to perceive the traffic environment to a large degree.

In this project a method used for performing accurate simulations on magnetization dynamics based on constrained field density functional theory has been validated and used for performing computations on a few magnetic materials. The method has been shown to Simulate systems consisting of iron well, but there are still problems with simulations of alloys containing both magnetic and non-magnetic materials..

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to Simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

This master?s thesis deals with integrating simulations using Agilents Electronic Design Automation tool ADS with customized Matlab scripts, for solving complex analog and digital radio architectures. In particular, it addresses predistortion, realized in the digital domain, of power amplifiers, modeled in the analog domain. The former is implemented in Matlab while the latter is implemented in ADS. Two versions of integrating the two systems have been tested: 1) Iterative approach on sample basis and 2) Scheduled batch solution by matrix inversion.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to Simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

To achieve the requirements to decrease emissions of greenhouse gases by 20 % by 2020, Swedenneeds to increase its use of bioenergy. In doing so it seems natural that those who already haveaccess to large amounts of biofuels in the form of by-products such as straw, wood chips anddigestible materials take advantage of these assets locally. By combining production of heat withpower production at the farm it may be possible to not only reduce the direct use of fossil fuel forheating but also reduce energy costs.The purpose was to Simulate different cases of using a small scale biofueled combined heat andpower plant for farm-based systems. A MatLab-model was developed and used to draw conclusionsabout the costs for production of heat and electricity with different conversion technologies.The model uses climate data to Simulate the variations in heat energy demand on a day-to-day basis.The given heat demand is the base of the simulation and from this the possible electric output iscalculated. This study has focused on the impact of the following properties: electric-, heat- andtotal efficiency, fuel, fuel price and specific fuel requirements.

Syftet med detta projekt är att utvärdera ModFix som verktyg och arbetsmetoden för att skaps fixturer med ModFix. ModFix är ett verktyg som är integrerad i Siemens simuleringsmiljön Process Simulate och används för att skapa modulära fixturer. Målsättningen med arbetsmetoden där fixturer skapas med ModFix är att ledtiden och mantimmarna för att skapa fixturer ska reduceras med 50 % i jämförelse med Volvo Cars nuvarande arbetsmetod där fixturer skapas med Catia V5.ModFix-verktyget består av tre funktioner. Dessa funktioner är; Configuration Administrator, Fixture Designer och Modular Fixture Mapping Report. Configuration Administrator är ModFix´s administrationsverktyg och används för att skapa de fixturbaser och fixturkonfigurationer som senare används för att skapa modulära fixturer med Fixture Designer.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to Simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.