This Bachelor thesis examines the possibility of replacing an outdated, analog video recording system to a digital counterpart. It is key that the video and audio signals remain synchronized, generator locked and time stamped. It is up to nine different video sources and a number of audio sources to be recorded and treated in such a manner which enables synchronized playback. The  different video sources do not always follow a universal standard, and differ from format as well as resolution. This thesis aims to compare a number of state of the art commercial of the shelf solutions with proprietary hardware.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

Title: Eurythmics, and building boats -A study in tacit knowledge.The education of eurhythmics at Malmö Academy of Music, is a program where a major part of the tutoring is oral; very little written information about the method is used. This essay will examine the forms in which the current knowledge base exists, as well as the methods in which this information is transmitted from teacher to student, and in which form the knowledge about the method of eurhythmics is existing. The tools for analysis are the theories on tacit knowledge. Interviews and written surveys are used as qualitative research methods. The content of these interviews and surveys are presented in the results chapter.

Denna studie behandlar bolags informationssignaler före, i samband med och efter förvärv. Med utgångspunkt i agent- och signalteorin har informationssignaler som skickats identifierats, där en kvalitativ ansats med tillhörande diskurs- och etnografisk innehållsanalys har använts för att kartlägga informationssignalerande mekanismer samt generera en modell för analys av informationssignaler i samband med förvärv. Studien uppvisar resultat om varför informationssignaler sänds i samband med förvärv, där bolag generellt eftersträvar att minska informationsasymmetri gentemot sina intressenter, legitimera beslut samt nyttja informationsövertag för att skapa personliga fördelar. Studien bidrar till området för informationssignalering, där utfall av förvärv påverkar omfattningen och innehållet som informationssignaler uppvisar..

This study raises the question how the implementation of the balanced scorecard in the municipality of Gotland has been influenced by the way of communication. A case study is made in the administration of Social-and care management on Gotland. We have been focusing on two different ways of communication. The first one is Shannon and Weavers model where communication is explained as a transmission of a message through a channel to a receiver. The other one is sensemaking where it is focal to give the information meaning.

The task for this thesis is to design a tool that is used to cut-out preforms of thermoplastic adhesive and also to make an estimate of costs for the stamping tool. The tool is used in the repair process at the MCM production line. The result of gathered information has affected how the design of the stamping tool has developed. The handling of thermoplastic adhesive in the repair process is one of the factors that influenced the design. The adhesive is sensitive for exposure to moisture. Therefore an automated feeding system of the adhesive is not recommended. The users wished for an automated stamping tool.

FlexRay is a new communication protocol which is fast, reliable and flexible and therefore can meet the increasing demands on data communication in the vehicle industry. The protocol is developed by an industrial consortium containing among  others BMW, Daimler Chrysler, Motorola and Phillips. Today (May 2009) Hägglunds is using CAN for data transmission in their systems. CAN is getting obsolete and has difficulties in coping with the increasing flow of communication. In this report FlexRay and its communication capacity is studied.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..

In the automatic manual transmission system, Opticruise, the choice of gear is based on several parameters such as road incline, driving resistance and vehicle mass. Many different mass estimations are made during driving. A final vehicle mass is then used to determine the current gear. Construction vehicles are often not equipped with air suspension and can therefore not estimate the vehicle mass when standing still. If that sort of vehicle is reloaded while standing still an incorrect mass estimation will be used and as an effect of that also a wrong gear.

This thesis describes a method of measuring axial magnetic leakage flux in an operational hydropower generator. Axial magnetic leakage flux is the magnetic flux at the ends of a rotating generator, which goes through the stator parallel to the rotor axis. This flux can cause circulating currents in the stator iron, giving rise to losses, and can in the worst case overheat a generator, causing it to melt down. To measure the axial flux, and how it affects the generator temperature, a measurement system was constructed on behalf of Vattenfall. The system consists of search coil sensors and a signal-processing unit with amplifiers and active filtering.  To confirm the behaviour of the axial leakage flux and the functionality of the measurement system, a test installation was made.

Fler människor börjar använda olika mobila operativsystem i mobiltelefonen samt appar som enbart fungerar på plattformen. Det leder till att app-leverantörer måste utveckla varje app till varje specifik plattform vilket är dyrt. De vanligaste operativsystemen som används idag är Android samt IOS men hösten 2012 släpptes Windows Phone 8 vilket innebär ytterligare en plattform att ta hänsyn till. I sammarbete med företaget Sogeti Jönköping fokuserar studien på att hitta en metod som gör det möjligt att migrera appar mellan plattformar och till Windows Phone 8. Studien innefattar också att identifiera för och nackdelar med olika app-typer genom en litteraturstudie och intervjuer samt att testa om migrationsmetoderna fungerar praktisk genom en implementation.Resultatet har påvisat att det finns två stycken olika metoder för migration vilket är PhoneGap och Xamarin.

This report discusses a method to detect divers in harbour environments usingpassive acoustic detection. The goal was to achieve as high detection as possiblewithout having too high false alarm rate. A short execution time was also desirable.By using the characteristic of an inhalation a band-pass filter was applied to the signalto improve the signal to noise ratio. After the filtering an energy estimation of thesignal was made. This energy estimation was later used in a frequency analysis, whichcould tell us if there were enough energy in the frequencies that correspond to adivers breathing frequency.

The determination of the optical properties of biological tissue is an important issue in laser medicine. The optical properties define the tissue´s absorption and scattering behaviour, and can be expressed by quantities such as the albedo, the optical thickness and the anisotropy coefficient. During this project, a measurement system for the determination of the optical properties was built up. The system consists of a double integrating sphere set-up to perform the necessary reflection and transmission measurements, and a computer algorithm to calculate the optical properties from the measured data. This algorithm is called Inverse Adding Doubling method, and is based on a one-dimensional transport model.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.