At the Department of Technology and Built environment at the University of Gävle there was an interest to study GNU Radio, which is an "open source radio project. The project is based on that most of the radio signal processing is made in an ordinary PC. The idea behind this degree project was that in a laptop there are several radio transmitters/receivers that takes space, generates heat and transmit in varied frequency band etcetera. All these radio transmitters/receivers could be replaced with a Software Defined Radio system. It means that one common, general radio hardware is used to different communications such as: WLAN, Bluetooth, GPRS, 3G etcetera. The waveform is generated in the software, which makes the system very flexible.

In this thesis a prototype board for data aqcusition is designed and manufactured. The board is compliant with Compact PCI Express and it can sample an analog signal with two time interleaved ADC:s. Furthermore, the board is also equiped with one FPGA for the possibility of signal processing. The thesis also include a study for investigation what is needed for a total solution for data aqcusition, represention and managing the sampled data with LabView..

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

This report presents the results of the tests of data rate and signal strength that I have conducted. The tests have been performed in the municipality of Arvidsjaur, Sweden. The report also contains the conclusions I have drawn from the results as well as an introduction to radio and the technology used in the nets that have been testedThe equipment used is:LG G2 cellphone used to test Telias 3GHuawei b593s-22 3G/4G router used to test Tele2s 3G/4GMobile Broadband Gateway R-90 used to test Net1s CDMAThe data rate has been tested with bredbandskollen (www.bredbandskollen.se). The signal strength(RSSI) has been read in the configuration menu of the broadband routers as well as in the cellphone.The conclussions drawn:Net1s net appears to be more used compared to its capacity than the other netsTele2s net has a high and even data rate where it?s signal strength is sufficient.

AbstractAim of this project was to analyse signals and try to localize the position of source of sound. It is donewith three microphones which have 90 degrees angle to each other. Each microphone detects one partof the sound wave. The microphones are connected toan ADC which turns signals from analogue todigital shape. After that the three signals are transformed to a computer.

This report presents the results of the tests of data rate and signal strength that I have conducted. The tests have been performed in the municipality of Arvidsjaur, Sweden. The report also contains the conclusions I have drawn from the results as well as an introduction to radio and the technology used in the nets that have been testedThe equipment used is:LG G2 cellphone used to test Telias 3GHuawei b593s-22 3G/4G router used to test Tele2s 3G/4GMobile Broadband Gateway R-90 used to test Net1s CDMAThe data rate has been tested with bredbandskollen (www.bredbandskollen.se). The signal strength(RSSI) has been read in the configuration menu of the broadband routers as well as in the cellphone.The conclussions drawn:Net1s net appears to be more used compared to its capacity than the other netsTele2s net has a high and even data rate where it?s signal strength is sufficient.

This Master's Thesis describes the design of a new system where a digital signal processor has been added to an existing imaging system consisting of field programmable gate arrays. The new system will offer a higher degree of flexibility by considerably shortening the design time and make it possible to implement more complex algorithms than the existing ones. The choice of system architecture and a test implementation are discussed. The test implementation consists of a program for the digital signal processor and VHDL code for one of the field programmable gate arrays. The code for the digital signal processor was designed for testing on an evaluation board from Texas Instruments.

This essay derives from the concern that horses ridden with a bit in their mouth can be subjected to strong pressure from the bit if the horse and rider do not understand each other. The horse's mucosa membrane and the tongue are very sensitive tissues (Cook, 1999; Manfredi, 2005; Oliveira, 2005; Terada, 2006) and the bit can then be a source of pain and discomfort. The training of the horse should therefore always be a step by step process and as the horse develops difficulties are increased. Oliveira (2005) suggested that high demands can be placed on the horse but to be successful in the training it is essential to be content with small progress and reward the slightest desired response from the horse. This corresponds with the principles of operant conditioning with negative reinforcement.

This paper describes the work done trying to diminish the noise present in the signal from an IR-detector. The project was aiming towards two different kinds of applications; heat protection and presence detection. The hypothesis was that the signal-noise ratio would decrease if a filter and a proper installation were used for the detector. Some experiments were executed to determine what kind of filter were the most suitable for each application and how these could be installed. After executing the experiments and evaluate the results we recommend to use a specific filter for each application.

The aim of my work was, from the point of view from my respondents and literature, to create a picture of why so many highly educated people born abroad don't have an employment that coincides with their education.The question at issue was: How come highly educated people born abroad don't have an employment that coincides with their education from the native country?In my work, I carried out interviews with six highly educated people born abroad that moved to Sweden in the 1990's. In my results and my conclusion I started with the view of the respondents and the literature, linked together to some theories I have found fruitful for my understanding of the respondents' answers.The theoretical starting point for analysis of my work was the human capital theory, the theory of growth, the signal and filter theory and Habermas' theory.The result of my studies show that there are several factors that causes many highly educated people born abroad to have difficulties in getting an employment that coincides with their education. Such factors are weaknesses in the language, the lack of networks within one's profession and the fact that it takes a long time to complement the education..

Stereotypic pacing is frequently observed in captive carnivores, however the underlying causes of this behaviour remain somewhat unclear. One of these possible causes are unpredictable feeding signals, which may give rise to frustration and subsequent pacing. Animal keepers at Nordens Ark had noticed that their Amur leopards had shown stereotypic pacing in connection to the passing of ATVs (All Terrain Vehicles) used by animal keepers primarly when feeding the animals in the park. The aim of this study was to investigate whether the stereotypic pacing of the two Amur leopards at Nordens Ark were affected by the introduction of a signal associated with feeding. The leopards were trained by classical conditioning to associate the sound of a siren with the delivery of food by an animal keeper.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

In today?s horse keeping, there is an increasing awareness of the importance of movement and activity for the horses comfort and tenability, while tradition has it that horses should be kept in boxes and small paddocks. In order to develop housing systems that fulfils and optimizes the horses needs regarding movement and activity, we need to know more about factors that influence the activity patterns of horses. A first step is to be able to record and analyze the gaits in horses with an automated system. This could be done by use of accelerometer data.In this pilot study, existing accelerometer technique was used to characterize the different gaits in horses (walk, trot and canter) by studying how their respective signal patterns differ and how this is influenced by the size of the horse.The accelerometers being used in this study measures the movement in three different spaces; horizontal, lateral and vertical.

In today's fast-paced, intense and complex media environment, it is hard for non-profit charity organizations to reach out and get their messages heard.In this study we examine whether the theories of advertising signaling also applies for charities. Past studies of the signaling theories indicates that higher perceived advertising expense leads to more positive effects on purchase behavior and brand perceptions. However, we believe that this does not apply for a charity organization. We argue that since charitable organizations have a fundamentally different mission than commercial companies, they will need different ways to signal quality and credibility, and therefore the common signal-theories will not hold for these organizations.To test our hypotheses, we conducted two surveys where the respondents saw one of five versions of the same ad for a well-known Swedish charity organization, or one of two ads for a commercial corporation. The ads had been manipulated to simulate different levels of perceived cost.Our results shows that perceived ad cost only affects attitude towards the ad if a charity was the sender, whereas perceived ad cost affects intentions, attitudes and credibility if a commercial corporation was the sender.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.