Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

The ammonia emissions are an environmental issue since they contribute to eutrophication. By far the largest source of ammonia emissions is manure from agriculture and should therefore be reduced. Loss of ammonia is not only negative for the environment but also to the farmer who loses nitrogen that could have been used by the crop. The focus of this study has been emissions from spreading slurry where the loss can vary widely depending on slurry-, soil-, and weather conditions. There are mainly two different ways to reduce the emissions. One is to inject or mix the slurry into the ground to avoid air contact. The other way is to use acid to reduce the pH in the slurry to a level between 5 and 6 where the equilibrium is so strongly pushed to NH4+ that hardly any NH3 can be lost.

Companies constantly strive for the perfect order which enables them to satisfy and retain their customers. This is a difficult process that can be facilitated by using different picking technologies. In this study, a research of the picking technologies Pick-to-Light and Pick-to-Voice have been made to investigate when each technology is suited.In order to collect relevant information and data to be able to answer the question formulation, a qualitative study with interviews have been made. The purpose of this essay was to investigate Pick-to-Light and Pick-to-Voice to see when each technology is best suited and to see what the differences between the technologies are. With our essay we wanted to help manufacturing companies to make the right decisions when implementing a picking technology.The results showed that those picking technologies give companies a higher picking quality and an increased work efficiency since the order picking is faster to perform, and that picking errors are reduced.

This paper aims at shedding light on the effects of a broken psychological contract in terms of job satisfaction. In a qualitative field study, the author researches seven newly recruites employees about their expectations when starting their jobs at the rapidly growing, Swedish company Klarna. Using Herzbergs two-factor model of hygiene and motivation factors as well as modern motivation theory, i.e. self-determination theory, the study answers questions as to what makes a candidate choose a company and what factors motivates as well as demotivates the recruit at the job, in the onboarding phase. The result is an attempt to describe what makes a recruitment process successful..

A new system of public transportation that can simplify and shorten the trips made throughout the city, anddo that both cheap and environment-friendly. Sounds like good news. This new system, though, require anall new type of infrastructure, differing from what we are used to see in our cities. Podcar, or PRT, as thesystem is called can become a transport revolution, possibly. If that revolution does happen it is crucial that webeforehand have studied the possible effects it can cause on our city environment, from a spatial point of view.This thesis thoroughly describes the function and essence of the PRT system and presents what is availabletoday and in what forms.

Democracy is now a legitimate claim not only in the society but even in the classrooms. According to the 1994 Curriculum for the Non-Compulsory School System, Lpf 94 in Sweden, are all pupils in all types of schools ought to have a high level of possibilities to be able to influence their education. But many studies have led to unsatisfactory results about the actual situation in schools. Swedish students are critical of the limited opportunities they have in influencing their own learning process. This essay is only one among the many studies that have dealt with school democracy during the last 50 years.

Motivation: The aim of this study has been to conduct a comparative study concerning how race, ethnicity and class is represented in American contrary to Swedish daily press and from there on to explore and explain similarities and differences that have been found in the material.Problem statement:? How is race, ethnicity and class represented in American contrary Swedish daily press?? What are the similarities and differences between the countries? daily news flow?? What causes the similiarities and differences to achieve their current form?Material: The material which has been the subject of this study consists of eight articles ? four American articles (USA Today) and four Swedish articles (Dagens Nyheter). The material has been elected to meet certain criterias and mainly discusses the effects the health care reform will have on the American population.Approach: The material has been approached by using theories concerned with race, ethnicity, class and framing. The method used to analyze the material was Critical Discourse Analysis (CDA).Results: The results shows significant similarities, although mainly differences, between the countries? daily news flow.

The idea to develop  a platform for a PID-controller came from the need to control the temperature in  an espresso machine in a more exact way than a thermostat could perform. In discussions with Syntronic AB the idea developed into PID-control for industrial use. Syntronic AB suggested that the platform should be based on a commercially available processor module to shorten the development time. The suggestion included the use of the microcomputer Raspberry Pi, which supports USB, HDMI, memory card and Ethernet.The work began with establishing a schedule for the 10 weeks of the projects duration, and after that a system specification listing all functions, implementation and limitations was made. When the foundation of the system specification was done, a preliminary system design took shape.Because of the Raspberry Pi´s lack of Analog-to-Digital converter, a circuit board containing Wheatstone bridges, differential amplifiers and a two channel Analog-to-Digital converter was fabricated.

The purpose of this thesis is to build on the current debate on male circumcision and from thetwo perspectives, consequentialism and non-consequentialism, describe the conflict of rightsthat exists on the issue and outline a normative conclusion about whether Sweden should banmale circumcision of boys or not. The idea is to clarify how the two sides' approach to theconflicting rights differ on the issue. The perspectives intends to provide further clarity to thearguments and provide a framework to resolve the rights conflict by, which creates morefavorable conditions to understand the moral bearing of the arguments in the debate. Thesurvey is conducted as a debate analytical study, conducted by compiling and organizing thearguments for the various positions in the debate. Based on the two theories I conduct ancritical analysis in which I examine the extent to which the arguments of each side lives up tothe perspectives moral standards.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: Artificial sweeteners in beverage and their effecton hunger and energy intakeAuthor: Sofia Andersson and Sofia JakobssonSupervisor: Heléne Bertéus ForslundExaminer: Anna WinkvistProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: April 11, 2012BackgroundIn 2010 the total consumption of soft drinks in Sweden was estimated to 69 litres per person and17 % of the domestic production was estimated to consist of soft drinks sweetened with artificialsweeteners. The effects of artificial sweeteners on hunger is not yet fully understood. It isspeculated that they might increase hunger and hence increase energy intake.ObjectiveThe aim was to compile the evidence regarding the effects of an intake of a beverage sweetenedwith artificial sweeteners compared to sucrose on subsequent hunger and energy intake.Search strategyA systematic search for literature was performed in the databases PubMed and Scopus.Selection criteriaThe inclusion criteria were RCT, human studies, articles published in Swedish or English, studieson healthy adults and studies measuring hunger with a subjective scale or energy intake. Theexclusion criteria were studies who measured energy intake under other forms than standardisedor controlled, studies without a standardised dose of the beverage and articles needed to beordered against payment.Data collection and analysisFour articles were selected and examined according to a template developed by SBU. Theevidence for each outcome was weighed together and graded according to GRADE based on asummarised evidence form developed by the Sahlgrenska Academy.Main resultsAll four articles measured subjectively rated hunger.

I have done a follow up study of the restoration of two rivers, Röälven and Grundan, in order to evaluate the effects of the restoration on the endemic population of trout. Both rivers have been used for timber floating during many years throughout the 20th century, and because of this, had all obstacles such as rocks and wood parts removed. In 2004-2005 both rivers were restored, and rocks and wood were put back into the rivers. Spawning grounds were created and boulder dams were constructed to promote the streaming water. The result showed that the trout population of both rivers increased after the restoration, but also that the trout population of Röälven increased more than that of Grundan.

Previously studies have shown that the way companies explain outcome in their annual report is not totally trustworthy. Studies show that the management has a self serving bias when they explain the result to give a positive image of the company. Our study is based on investigations into this phenomenon in the telecom market in Sweden. Turbulent market conditions with, among other, deregulation of the monopoly of fixed telephony and a huge technical evolution, which has led to an increase in competition, is the reason to why we have chosen to study the telecom market in Sweden. As a benchmark in our study the attribution theory will be used.

EW26 is a Bachelor thesis carried out by students, Jessica Blomberg, Sara Danielsson and Mikael Johansson, during the academic year 2010-2011 at the Innovation Engineering Program of Halmstad University. The project was conducted in close cooperation with Ergosafe AB.Ergosafe develops, manufactures and sells electric sliding windows. Due to the company?s current expansion phase they want to increase their product range. The company has identified a need for large windows that moves vertically.

Declining union memberships are a fact in both Sweden and Finland. At the same time, the autonomous labour market parties and the high membership rates are the most significant factors for the two countries compared to Europe and the rest of the world. These two factors have in turn been developed and strengthened since the beginning of the twentieth century. By autonomous labour market parties I refer to the fact that the labour market parties themselves through collective bargaining are agreeing on the labour market conditions, without interference from the government.This paper is therefore taking it's stance in the question of what happens with the autonomous labour market parties when the membership rates are in decline. With this in mind, this paper describes the judicial development, the collective agreement and labour market structures, the legal consequences of collective agreements and the opportunities of industrial and sympathy action in both Sweden and Finland. The two countries' systems of labour law have caught some negative attention, hence two of the most discussed cases of recent years are given some attention as well. The collective judicial conditions are very similar in both Sweden and Finland regarding the labour market main actors' collaboration, the collective agreement structures and legal consequences and the opportunities of industrial and sympathy action.