There are several thousands shallow bays along the Swedish east coast. Most of them are disturbed by different human activities, and undisturbed bays can be considered as quite unique. In the sheltered shallow bays water warms up more rapidly than adjacent water favoring the growth of vegetation, which in turns is beneficial to spring spawning fish species like perch and pike. It is nowadays more common that coastal habitats are inventoried to facilitate future preservation and planning. The aim of this study was to investigate the shallow bay Utanåfladen (59° 53`31.38 N 19°00`44.90 E) in the north Stockholm archipelago and evaluate its habitat value.

In this bachelor essay an attempt is done, to recreate a probable Bronze Age landscape on Gotland, with GIS as a tool. The landscape on Gotland is situated with many different monuments dated Bronze Age, such as cairns and stone ships. In creating of the maps, two possible shorelines contemporary with the Bronze Age have been calculated and marked on the maps. Furthermore, peat lands have been drawn upon the maps, by using the information from geological maps.A landscape variable have been compared between Bronze Age places and Early Iron Age houses; the soil type. On Bronze Age places gravel is the most common, while moraine marl is the most common on places with Early Iron Age houses.From a selection that were made, all Bronze Age places where within 3 km from the water, either the recreated shoreline or peat land.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

Climate changing is a growing problem for many countries and communities over the world. The cities has a huge work to deal with in their reforcements of their cities to be resilient ones. This thesis makes an effort to investigate and illuminate some of the problem the cities has to solve related to flooding, hazards, erosions, rising sea levels and crotches. This thesis will help to find solutions that international and national efforts has produced and handed out to each other. A lot of communities are charing their excellent tools that works for them.

The purpose of this paper is to understand the climate of the street and how it can be modified to better meet the needs of the street and the user groups. At the same time the conditions of the street and its surroundings also has to be taken into account. To accomplish this it is necessary to have a broad knowledge of the climate conditions in the city. Therefore an overview of the climate elements and how these are modified in the built-up areas are given. The part of the paper which deals with the city climate has a global approach to be able to give an as complete picture as possible.

Pålagt skratt är något som har använts i hela tevens historia och används än idag. Från början fick man inspirationen från radions tidiga dagar då man ofta spelade in sina program eller shower framför en publik. Det pålagda skrattet har funnits i din teveapparat i nästan 70 år, men i din radio hör du det aldrig. Varför inte det? Mitt examensarbete syftar till att göra ett humorprogram i radio med pålagt skratt och undersöka vad folk tycker om detta grepp i radio.

Vattenfall Heat Uppsala runs the waste incineration plant in Uppsala, which produces district heating, process steam, district cooling and electricity. Vattenfall Heat Uppsala has decided to introduce an energy management system with the aim to increase the energy efficiency of the plant. The basis in such a system is to make an energy mapping.In this thesis an energy mapping has been performed at the waste incineration plant with the aim to identify and determine the size of energy flows. The investigated energy flows are used fuel, produced and used steam, produced district heating and cooling. Also the use of electricity to run the processes has been investigated.

This thesis examines the environmental benefits resulting from the choice of environmental certification scheme, with focus on energy. This was carried out by studying the measures that were implemented as a result of the certification of Sweco's three largest office buildings in Stockholm, Gothenburg and Malmö. The office property in Stockholm has been certified with the Swedish Environmental Building, Gothenburg with the British BREEAM and Malmö with the U.S system LEED.The results from the study indicate that an environmental certification can reduce the energy consumption by up to 59 percent and the water consumption by 20 to 66 percent. However; the interviews, literature study and simulations in MATLAB indicate that the size and scope of these environmental benefits depend on several identified factors: the type of building and its conditions, system selection, grade level, the choice of indicators, the ambition of those involved and when in time the certification process begins. The comparison between Environmental Building, LEED and BREEAM showed that Environmental Building for the office property in Stockholm gave the largest environmental benefit in terms of reduced energy consumption thanks to several large measures.

Syftet med denna uppsats är att skänka en grundläggande illustration av hur relationen bildinom bild och skräck kan se ut. Studien koncentrerar sig på estetiken och reflexiviteten hosbilderna inom bilden hos de japanska skräckfilmerna The Ring, Pulse och Dark Water. Dessabilder består av ett videoband i The Ring, webbkamerabilder i Pulse och övervakningsbilder iDark Water.Användningen av rörliga bilder inom rörliga bilder är reflexivt i den meningen att vimedvetandegörs om filmmediet självt som en konstruktion av bilder. Detta fenomenuppmärksammar oss också på akten att se. Syftet i skräckfilm är att skapa känslor av olust ochskräck hos oss och detta åstadkoms, bland annat, genom hur bilderna ser ut och är upplagda.Ett återkommande element hos bilderna inom bilden hos våra filmer är otydligheten hosflera av dem och detta att vi inte kan se bilden tydligt kan ge upphov till olustkänslor.

During a fire large amounts of particles and unhealthy agents occur.  Polyaromatic hydrocarbons (PAH) and toxic metals are examples among many others. These agents have a capacity to bond to particles and when the fire is extinguished, the particles can be transferred with the extinguish water into the soil and to the groundwater.Recent studies in particles have been conducted. A study by Ulrika Iverfelt (2014) reviled that the particles from a fire contained large amounts of both PAH and metals, which is consistent with earlier analyses. Her column experiments with particles in the size ? 11 microns and ?100 microns in silica sand, reviled that the larger particles was immobilized because the transportation was influenced by sieving or physiochemical particle and surface interactions.The transport of the particles in soil and groundwater is regulated by two main mechanisms: physiochemical surface interactions and straining.

ABSTRACTThe fauna of the Lower Cambrian is far from fully understood, as is the environment of that epoch. Some of the most crucial moments in the history of evolution takes place during this epoch; the Cambrian explosion and the appearance of ecosystems as we know them. That makes it an important period to investigate. Doing so, the Lower Cambrian offers a lot of problems, one of which is that body fossils are seldom preserved. That has often left us with trace fossils to create an image of the Lower Cambrian life, but also some bedrock features such as ripple marks.The main purpose of this work has been to investigate the possibilities of relating the wave lengths and forms of recent wave-generated ripples to fossil ones, and also to evaluate the methods for that kind of comparison.

This thesis is based on a case study for the real estate manager Mimer in Västerås. Mimer provides a great deal of this city?s rental apartments. Many of their buildings have ventilation systems with a type of heat-recovery called ?heatpipe?.

Highly polluted urban storm water from e.g. highways can contain large amounts of heavy metals that may cause harm if they are discharged into recipients. To remove the heavy metals a possible low-cost method that does not require much maintenance, could be the use of reactive filters with filter materials consisting of industrial residues or other cheap mineral based materials. Dissolved metal ions are removed by reactive filters through the processes of ions binding to active sites on the surface of the filter materials, or by formation of insoluble precipitates.The ability of CaO-treated granulated blast-furnace slag, iron oxide coated sand, olivine and nepheline to remove seven heavy metals (Cr, Cd, Cu, Ni, Zn, Pb and Hg) from urban storm water was studied. Initially batch experiments were performed where the effect of pH, dissolved organic carbon (DOC) and dissolved ions on the adsorption efficiency was studied.

In a sustainable society the use of renewable energy and recycling of materials is of high importance. Wastewater treatment plants use large amounts of energy in the processing of wastewater. This study seeks to evaluate wastewater as an energy resource and to examine treatment plants potential to become sustainable energy producers. The study is based upon the internal processes of Himmerfja?rdsverket.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.