A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

This essay is a product of the author?s interest in silent films from Soviet, especially, documentary films. Before the 1920?s documentary filmmaking had mostly been limited to newsreels and short scenes. Only occasional feature-length documentaries had been made.

AbstractBackground: The factors goals, emotions and motivation are nowadays well researched. Studies that shows the interaction between these three factors does exist, but in a small amount. In all different jobs people encounter these factors, no matter what you?re working with, some experience them daily and others only sometimes.Purpose: We want to study the significance of the interaction between goals and emotions among employees in the construction business, when leaders are about to motivate their employees.Implementation: To succeed with our study and achieve the purpose, we chose to do a qualitative research. We have conducted four visiting interviews and one telephone interview, with both leaders and employees in the construction business.Results: We have through our study found out that the interaction between goals, emotions and motivation are important in the work of construction, even if it?s not something everyone thinks about.

Abstrakt Produkten som jag har utvecklat är en mjukvarubaserad 3D-renderare. För att göra en sådan produkt är man tvungen att gå djupt in i området 3D och utföra alla beräkningar på egen hand. Dessa tar annars grafikkortet hand om. Denna rapport förklarar varför jag har valt att göra en egen mjukvarubaserad 3D- renderare och vad den är för något och i vilka områden den används. Här förklaras även min syn på programmering, digitala spel, vad programmering innebär för mig och hur min syn på spel har påverkat mig med tiden. Jag tar även upp mina tankar om spelindustrin och samhällets misstolkade värderingar av spel samt vad för sorts spel jag anser skulle gynna mänskligheten i framtiden. Vad jag tycker om utbildningen Digitala spel nämns också samt hur jag tror att den skulle kunna förbättras. Slutligen följer en kortfattad beskrivning av hur mitt projekt har genomförts. Abstract The product I have been developing is a software based 3D renderer.

Introduktion: I NNR 2012, har man höjt rekommenderat intag av vitamin D från 7,5 ?g/dag till 10 ?g/dag för personer från 2 år upp till 74 års ålder. Livsmedelsverkets matvaneundersökning Riksmaten bland vuxna 2010-11 visar att medelintaget av vitamin D i genomsnitt var 7,0 ?g/dag. Patienter med inflammatoriska tarmsjukdomar (IBD) har en högre risk för osteoporos på grund av medicinering med cortison samt brist på vitamin D.Syfte: Att undersöka om personer med IBD uppnår de nya höjda rekommendationerna gällande intag av vitamin D via maten och/eller kosttillägg och kosttillskott.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

This study examines whether it would be profitable for travel distributors in the charter to expand its offerings to other travel related products, and also the products that are in demand. We are also studying the role that brand has for customers' choice of travel.According to Hellman, e-commerce is to be preferred since it is competitive because it gives the travel distributors the opportunity to lower down prices. Therefore, we also investigated the proportion of respondents who would consider buying these travel-related goods through the travel distributors? websiteIn support of this study, is a survey with a population of 100 charter travellers. Respondents are divided into two groups where the first group consists of people who have booked their trip in stores, and the other via the Internet.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

The purpose of thesis was to investigate and compare how two companies within pharmaceutical industry and nuclear power industry are currently working with quality development regarding continuous improvement and Lessons Learned in business processes. In addition, a simple comparison was made with the automotiveindustry.McNeil AB are improving their processes continuously and are according to the findings of this report performing well in their pursuit of world-class pharmaceutical production. They have a well functioning process regarding improvements proposed in weekly improvement meetings engaging all employees. However, during interviews it was made clear that the functionality of the process which administer improvement proposals generated in addition to, or beside the weekly improvement meetings, were inadequate. McNeil AB is proposed to administer this through an IT solution instead of by paper and e-mail, that simplifies the process of adding, implementing and follow up an improvement proposal.The nuclear power plant Ringhals AB recently made major improvements in their business processes as well as the plant itself.

This paper aims to study, from a legal dogmatic method, the Swedish legislation on fixed-term work related to the EU directive 99/70/EC1. In particular, the directives demand to prevent abuse of frequent temporary employment.An employer may, in agreement with the Swedish legislation combine different types of temporary employment, to prolong the time in the temporary employment. In this proceeding an employer can avoid employing an employee in a permanent position. For example, an employee can be employed in a probationary period of six months, in a general temporary employment for a maximum of 24 months, and thereafter in a temporary position for a maximum of 24 months before the employment turns into a permanent position. This provided that the employments were made by the same employer, and within five years.

Background: Miscarriage is a common phenomenon in our society. It is reported that approximately 17 % of all pregnant women in Sweden go through a miscarriage every year. For many women miscarriage is a tumultuous life event that often has a deep emotional impact. Miscarriage is a subject that often is prohibited to talk about in our western society. Consequently this means that nurses have an important role in the emotional support for these women.

By conducting interviews, studies as well as scanning the current scientific landscape, this paper examines the opportunities of increasing current capacity within the public transportation system in Stockholm with simple financial means for the benefit of the travelers. The paper focuses on the central station of the subway system and how adjustments of processes carried out in relation to the turnstiles could increase performance within areas of interest, given the preferences of the travelers. The theoretical framework of the paper includes models from the field of capacity management as well as theories related to the pedestrian behavior. Applying these theories and models to the collected data, the paper derives some main conclusions. First of, people using the public transportations system, and especially the subway, consider speed and dependability as the most important performance objectives for the caretakers of the public transportation system, SL and MTR to master.

Ala sawmill in Ljusne, Hälsingland, has increased its flow through the sawing plant during the last couple of years. The problem now is the sorting plant, as this part of the mill is now slower than the rest. A close analysis of the sorting plant was therefore necessary to be able to increase the flow through. The aim of the project was to find solutions that can lessen downtime and increase flow. The goal was to increase the flow from 650 to 925 logs through the sorting plant per hour.

The purpose of this study is to find out how IOGT-NTO conducted the debate about the Swedish negotiations with EU concerning the accession. The essay investigates how the debate was conducted between the years 1993, 1994 and 1995. A further distinction lies in five requirements IOGT-NTO delivered before the negotiations.The material for this study lies primarily in the editorial pages of IOGT-NTO's magazine Accent. The background content comes primarily from secondary sources and deals with the temperance movement and IOGT-NTO, and dealing with the EU and the Swedish alcohol policy.In July 1991, Sweden submitted its membership application to EU and subsequently in the 1993 the negotiations began. During the same time IOGT-NTO began its debate on a possible EU membership in the Accent magazine.