This report discusses the constructionof different types of exterior wallconstructions and analyses wall layers.Standard wall constructions from theSwedish building contractors NCC andSkanska and also from the materialproducer Isover have been chosen for theresearch. Life cycle cost analysis hasbeen made to conclude the mostprofitable wall type, seen from asustainable and economic perspective.The calculations have been made for aperiod of 50 years.The report shows that building with wellinsulated walls is a more profitablesolution both economically and whatconcerns sustainability even though thehigher investment. However, when wallssimilar insulation properties are beingcompared, the study proves that lowerinvestment cost is more profitable.The report introduces requiredconstruction techniques of walls inorder that the reader should understandwall constructions with different layersand properties. The essay shows theimportance of properly constructed wallsto avoid air leakage and moisturedamage.The essay has been implemented byliterature studies, contacts with NCCand Skanska and by energy calculationsmade by hand and using the software VIPEnergy..

Telia Telesvar is an automatic anwering machine that is provided in your stationary telephone at home. The drawback of this is that you cannot see if anyone has called you. This report describes how a terminal for Telias Telesvar could be designed. Telesvar terminal will show in a display if anyone called you and show the incoming number. It will also play the spoken message in a built in speaker.

The purpose of this research is to examine the implications of the provisions in the Swedish Code of Corporate Governance (the Code) concerning auditor attestation of the internal control report. We will focus on how the auditors? augmented responsibilities will affect the efficiency in the audit process.Our research indicates that the main benefit from reviewing the internal control report is achieving more reliable internal controls, which results in greater prevention of misstatements in the financial statements. This will affect the efficiency in the audit process since the auditor can place more reliance on internal controls when performing audit procedures. This implies that the benefits of preventing misstatements could outweigh the efforts and resources spent on reviewing the internal control report..

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better productivity. In conclusion, the report author tries to demonstrate what can lead to increased productivity and improved work experience..

This study investigates whether auditors affect the tendency to report correct taxes for small companies. Since November 2010 the smallest companies in Sweden are no longer obliged by law to have an appointed auditor to perform the former yearly audit. The auditor shall during the audit, amongst other tasks, investigate whether the audited companies follow Swedish law, and report them if they do not. The presence of the auditor might influence the actions of companies to act according to law, and reduce errors in the reporting. Errors regarding tax reporting will result in a revised tax decision if detected by The Swedish Tax Agency.

This report is a degree paper made for the Engineering program in Technical Chemistry at the School of Engineering, Jönköping University.The intention of the project which is described, is to answer whether HV71 might become environmentally certified according to the criteria of "miljödiplomering". The project also included an investigation of which further steps and measures must be undertaken by the enterprise in order to achieve the certificate. The final part was to implement the necessary requirements for the certification.The report starts with a short background where the origin and function of environmental management is briefly explained.The report continues with how the practical work with the environmental certification was done according to requirements of Jönköping municipality. Motivations behind each part of the process are given as well as explanations of how each part of the process was carried out.The final result of the project was that HV71 took the measures needed to live up to the required demands. After a revision made by Miljöstrategen i Jönköping AB, HV71 passed the demands and became thereby an environmentally certified business..

This report investigates a possible solution to the problem with adapting wave powerplants to work in countries with tidal water. The wire connecting the buoy at the surface with the generator at the bottom needs to adjust to the varying water depth. Our solution to this problem is to attach the wire to a jack which is then placed inside the buoy. The jack is then powered by an electric engine. The report discuss what forces the buoy will be exposed to and then the structural integrity of the design is evaluated through simulations.

Millions of people are using search engines every day when they are trying to find information on the Internet. The purpose of this report is to find out how people formulate search queries. The result in this report is based on an empirical study which is based on a search log from the Swedish search engine Seek.se.One of the results in this thesis is that nearly all search queries are based on keywords..

This report is the result of several interviews of employees within the field of pedagogy. The background behind this report is my period as a trainee in one of the daily activities in Malmo. In daily activities the employers gets training, education and guidance in Marte meo, which is funded by public finances. The method, which this study focuses upon is called Marte meo. It is a method of communicating and developing the means for the participants to evolve their skills in communicating and increase self esteem.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

Event marketing has during the last decade become a wide spread marketing method. This is because the marketing clutter has increased heavily during the past years and brands are looking for new ways to reach their target audience. The previously well accepted marketing measurement "satisfaction" has shown tendencies no longer to be sufficient for success in today's competitive marketplace. Therefore, the research has somewhat moved to the measurement "brand love" to explain differences in strategic consumer behavior. That is the background to why this report examines and answers the question if a brand through event marketing can enhance brand love.

Presently environmental and ethical matters are in the centre of attention and companies producing sustainability reports have become more common. It has also started to become more and more ordinary to assure these sustainability reports by an external part. However, the amount of assured sustainability reports differs a lot between different countries.There can be several reasons for why the companies chose to get the sustainability report assured. Previous studies state that the choice to produce sustainability reports can be re-lated to theories like the legitimacy theory, stakeholder theory and the agent theory. Other aspects that can affect the decision to construct a sustainability report can according to prior studies be different company characteristics and the national culture in the country in which the company is operating.

This report describes the construction of a climate-cabinet for testing of HV-cards (High Voltage) produced at VG Scienta. The main part of the report describes all the different components of the cabinet. The most important parts are a PID regulator from Eurotherm model 2408, a solid state contactor (SSC), a thermocouple, a finned resistor from DBK and different fans. The report even includes the connection between components by cable wiring, isolation, grounding, fuses and shaping of metal goods.As the cabinet also communicates with a computer, the report includes the solution of the data communication using the software iTools from Eurotherm. The communication part includes information about a converter that converts EIA422 to USB.The cabinet was produced at a company, called VG Scienta, in Uppsala during the spring 2010.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.