The aim of this study is to find out whether there is any difference to be found in the attention ability before and after physical activity. The method used in this study was made of an experimental design. The participants were chosen through a cluster sampling and thereafter divided into a control group and an experimental group. A total of 64 pupils from upper secondary school participated in the study, 25 of them in the experimental group and 39 of them in the control group. Since the measure was repeated, both in respect of time and the comparison between the groups, a mixed design was used.

Chlamydophila psittaci is a common cause of diseases in parrots ranging from being less serious to more serious. It is also a zoonotic disease which poses serious health problems to humans. The disease is highly under diagnosed. The symptoms in birds are nonspecific and may be indicative of many different diseases which make it harder to diagnose and treat. The purpose of this study was to investigate the prevalence of C.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

AimThe purpose of this study is to compare the level of activity between playing wii Sports Tennis and wii Sports boxing, and the usual sports, and to see how the two variants are perceived.Issues:- How much strain ratio and energy consumption it gives to exercise wii sports compared with the playing of sport for real?- How do the test participants experience the different tests?- How are the two wii sports games against each other in terms of activity and fitness in the school environment?MethodThis is an experimental study in which 10 test participants (5 men and 5 women) have carried out four different physical tests. The tests consisted of either playing an exergame or playing a sport for 25 minutes. Physical activity was measured during the test using a heart rate monitor. All test participants completed all tests in the same order.

Fagan Test of Infant Intelligence (Ftii) är ett parjämförelsetest som mäter spädbarns intresse för ett nytt visuellt stimuli när detta presenteras tillsammans med ett stimuli redan känt för spädbarnet, kallat nyhetspreferens. Även om Ftii har visat sig fungera väl vid bedömning av spädbarns kognitiva nivå kan testet förbättras på ett antal punkter. För att uppnå reliabla resultat har försökspersonerna ofta testats vid ett flertal tillfällen. För att undersöka möjligheterna att ytterligare validera erhållna resultat från Ftii har en version av Ftii skapats för att utföras med en ögonrörelsemätare. Denna version, kallad Ftii-Ö, har testats med hjälp av en spädbarnsgrupp och en vuxengrupp för att på så sätt utvärdera för och nackdelar med ett test utfört på ögonrörelsemätare.

Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.

With knowledge of how the southern Swedish forests have been affected by storms the past years, this study intended to find out which factors affect the storm firmness of a stand the most. The study was based on data from stands in the, by the storm Gudrun, affected area. The results of the analyses that tested the stand factors that influence the amount of storm damage to the greatest extent showed that the storm sensitivity of Norway spruce stands were largely due to previous management actions. The factors that could be controlled by thinning and had relevance of storm damage standpoint, according to the results were; the dominant height, volume, basal area weighted mean diameter and stand age at last thinning. In this study, these results are not as clear for Scots pine.

This thesis aims to investigate SAAB AB´s possibilities to use synthetic instruments in their test systems. The reason for this is reducing costs and the risk of obsolescence which is common when test systems operate for several decades.The market around synthetic instruments has been explored in the search for suitable hardware and software. Software has been developed in LabVIEW and synthetic instruments have been created with the help of IVI-drivers. The hardware consisted of PXI-instruments (Waveform generator and Digitizer), connected to a computer using a fiber optic link and PXI-chassi. The created instruments was then compared to common instruments used today, and the comparison turned out well.

Chlamydophila psittaci is a common cause of diseases in parrots ranging from being less serious to more serious. It is also a zoonotic disease which poses serious health problems to humans. The disease is highly under diagnosed. The symptoms in birds are nonspecific and may be indicative of many different diseases which make it harder to diagnose and treat. The purpose of this study was to investigate the prevalence of C.

In the last few years people have become more and more aware of how humanity is affecting the climate. In the direction of reducing the greenhouse gases is to design engines with higher tensile properties and reduced weight, in order to achieve lower fuel consumption and cleaner fuel incineration in today's truck engines.In order to achieve these requirements it?s necessary to increase the combustion pressure in the engine. This requires higher tensile properties and high thermal conductivity of the engine material. The department of Component Technology at the University of Jönköping in collaboration with Volvo Powertrain AB, Scania CV AB and DAROS Piston Rings AB has been commissioned to develop this material and to find knowledge of material properties used in truck engines and piston rings used for marine applications.The purpose with this work is to analyze the tensile properties of a series of cast iron, cast under different metallurgical conditions.Four different series of cast irons have been analyzed from four points of view, carbon concentration, nodularity, amount inoculation and cooling rate.After the tensile test all specimen data was analyzed in a mathematic calculation program called Matlab 2006a.

The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.

Bakgrund och Problem: Aktiemarknaden påverkas både av inhemska och utländska faktorer. Därför är det av intresse att se vilka makroekonomiska variabler som påverkar den svenska aktiemarknaden. Anledningen till att Sverige har valts som den geografiska punkten är att det är av intresse att se hur ett litet land som Sverige, som har en öppen ekonomi påverkas av de utvalda makroekonomiska variablerna.Syfte: Syftet med uppsatsen är att med hjälp av information samt analys, studera hur de olika makroekonomiska variablerna påverkar den inhemska aktiemarknaden. Olika faktorer som påverkar aktiemarknaden kommer att lyftas fram för att i sin tur även se till de olika branscherna.Metod: Då data enbart består av hämtning av tidigare information fokuseras det enbart på sekundärdata i form av historiska siffror samt historiska undersökningar. De statistiska tester som tillämpas är Granger Causality test, Johansens Cointegration test, Impulse Response Function test, ADF test, KPSS test, Mulitpel regression.Slutsats: Med de resultat som presenterades i denna studie, skulle vi nog inte kunna säga att vi har ett svar över vilka aktier en investerare ska införskaffa.

AbstractAbetong in Falkenberg manufactures, among other things, small prefabricated concrete buildings for housing various installations, such as electric transformers.The aim of this dissertation is to reduce the time needed to design such buildings, by way of finding a number of standardized buildings. Standardized in such a manner as to incorporate both the needs of the manufacturer (Abetong) and its customers.To analyze the needs of the parties the work has included a market survey and calculations on the strength of these buildings.One survey was a letter questionnaire to all of Abetong?s customers who have, in the past, ordered these types of building. The aim of the questionnaire was to establish how the customers want these buildings designed.Another survey conducted was an inventory of all of Abetong?s previous projects where these types of building were manufactured.

Introduction: The Reading the Mind in the Eyes Test is a widely used test for measuring aspects of social cognition. The aim of the present study was to provide results from a group of typically developing Swedish children (age 9-12) and to compare these results with children and adults in other Swedish and English studies, as well as results from a group of children with Asperger syndrome. Method: A Swedish version of the child version of the test was completed by 83 controls and by six children with Asperger syndrome. Results were compared between the two groups and with data from other studies. Results: The children in the current study did not differ on scores compared to children in the same age group in other studies.

WebGL is a standard for drawing graphics in a web browser. Currently it isn?t widely understood how consistently WebGL performs across a majority of the de- vices that support it. Determining if an image looks correct to a human observer is an interesting problem. The solution for this is useful when developing WebGL applications, since a developer could make better informed decisions during de- velopment.