GPS is perhaps the future in agriculture. The next years will show it but the precision becomes only better and better and the number of users becomes only more and more. This work shows experiences from today's users and how the profitability can be improved on a farm with normal plant cultivation. The aim is to show how big the actual advantage can be to have a GPS and how good precision there is with the equipment. John Deere and Trimble are the big producers of GPS equipment to the agriculture.

I och med den tillväxtprognos som Göteborgs Stad har så kommer även godstransporterna attöka. Syftet med studien är därför att identifiera slöserier i kommersiell godstrafik med hjälp avLean Productions 7 + 1 slöserier. Slöserierna skall sedan anpassas för att kunna framställas i enLeanbaserad slöserimodell för den kommersiella godstrafiken. Dessa kommer sedan teoretisktatt effektiviseras eller elimineras. Tillvägagångssättet har bestått av kvalitativa observationer,intervjuer samt teoriinsamling.Lean Production är ett produktionssystem och synsätt framtaget av Japanska företaget Toyota.Dess två huvudprinciper är att företagen alltid ska respektera människor och sina medarbetaresamt ständigt jobba med förbättringar för att bli så effektiva och produktiva som möjligt.Förbättringarna sker i form av att identifiera Leans 7+1 slöserier för att därefter reducera ellereliminera dem.Studiens resultat är häpnadsväckande hur ineffektiva vissa transporter är.

2. SUMMARY A small garden exposed to a harsh coastal climate can be difficult to design. Limitations in space and in plant varieties increase the needs of an in-depth knowledge to achieve wanted goals. In this degree project the challenge has been to create a functional and position adapted garden for a very small beach house lot in Mölle, a little harbour village at the south coast of Kullaberg. ?Villa Malm?, is situated directly on the bedrock in a close settlement where the gardens, in most cases are very small and exposed to strong salty winds.

The objective of this thesis is to make a training material for KSU, which shows how radiation affects the different electronic components in a radiological environment.All electronic systems in the presence of high ionizing radiation can experience difficulties and be destroyed.This influence may compromise the control system and thus the safety of a nuclear reactor plant.To achieve this objective requires a description of electronic components and sensors, to better understand its function.This thesis will also show the possible solutions available that the author found interesting.Organizations such as NASA, CERN and ESA have worked to develop electronic components immune to radiation. Those organizations have also developed a test protocol that guarantees to a certain extent the security of electronic components in a radiological environment.Since we know how the material reacts with the radiation, it could develop a material that can be resistant to radiation or like CMOS technology has proposed, to reduce the component to avoid the storage of charge in the oxide.Another solution can be the GRAPHENE. Its features will revolutionize the electronics and provide answer to the radiation problems, Graphene will replace Silicium and the electronic components will only have a few nanometers dimensions so the oxide area also reduces, and in this way avoid the known problem of storage of charge..

Detta examensarbete innehåller en beskrivning av växter som under olika förhållanden trivs och kan växa i områden med delvis eller hel skugga. Beskrivningarna av växterna är översiktliga och ämnar inte informera läsaren grundligt om växten utan enbart om enklare fakta för att kunna planera sin trädgård. Jag har valt att inrikta mig på markförhållande beroende på klimatet (torr, fuktig och blöt mark) och markförhållande beroende på substratet (sand, lera, humus och torv) samt temperaturbundna växter. Därefter följer en slutsats där jag reflekterar över mitt arbete. ***********This thesis contains a description of plants that thrive and can grow under different conditions in areas with partial or full shade.

The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

I chose to study how the Swedish Air force carries out their work with setting goals for their work to improve flight safety and compare this with how the Swedish nuclear power plant Forsmark performs their work with improving nuclear safety. The study showed that both organisations have a lot to improve on in their ways of how to work. Especially when it comes to engaging the employees in the process, both in letting the employees be a part of coming up with areas to work on and in letting the employees evaluate which progress that has been made. It also showed that both organisations need to improve their methods for evaluating the work that has been done. This is especially important for the Air Force which evaluates on many levels and locations and did not have a set standard for how to conduct the evaluation.

This examination work aims to describe how a supply chain around the biggest pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the pellets factory.

Use of lighting is crucial to make public urban places available during dark hours. Landscape architects participate in planning of lighting, but during our education there is very little taught on the subject. Through this study we approach the subject of lighting by looking into lighting methods for urban plant materials during winter. In this thesis we look into ways to emphasize the visible characters and experiences of urban plants during winter season using light. Target audience are landscape architect students and landscape architects without knowledge of lighting. The part of the thesis that describe basic conditions for, and visual characters of plants can be useful to lighting designers without knowledge in this subject. Working methods used were the following: ? Pre-study about light and lighting techniques through literature and dialogues. ? Compiling important visual winter plant characters through photography and literature. ? Outdoor light experiments with plants.

AbstractThe urgency to find alternative fabrics to conventionally produced cotton is increasing as vast amounts of agrochemicals are used and a lot of irrigation is required. In this literature survey the potential of organic cultivation practices to produce highly qualitative hemp fibre, suitable for the textile industry, was investigated. The definition of a fibre in the textile context as well as of the qualities that are essential for a textile fibre was necessary as a base for the discussion in this thesis. The quality parameters looked at were fineness, strength, length, friction, and colour. The impact of external growth factors and plant development on these quality properties are discussed.

Människans utsläpp av miljö och klimatpåverkande växthusgaser har ökat i snabb takt de senaste hundra åren. Fler varor produceras, konsumeras och transporteras över hela jorden för att uppfylla de krav människor har på sin levnadsstandard. Livsmedelsindustrins roll i utsläppen är betydande, speciellt köttproduktionen, som står för 18 procent av världens totala växthusgasutsläpp. Genom att minska den mängd kött som ingår i människors måltider och gå mot att äta mer växtbaserat, som inte innehåller köttprodukter, kan matens miljöpåverkan minska. Ett viktigt område är offentliga matserveringar, vad som serveras där har en inverkan på människors matvanor och deras syn på mat.

Sydkraft Vattenkraft AB owns and operates the Traryd hydropower plant, located in the river Lagan in the southern part of Sweden. The gravity dam is classed according to RIDAS guidelines (Hydropower Industry Dam Safety Guidelines) as a class 1B dam. This means that the dam must discharge a class 1-flow which has a return period of 10 000 years. The inflow into the dam has been calculated in an earlier report to 495 m3/s, with a waterline at an elevation of 126, 3 meters above sea level. The gravity dam has a discharge system with two rectangular weirs, which results in a smaller discharge than the necessary 495 m3/s.

The aim with this study was to collect fundamental information, and to plan, a windpower farm in Juddhult , Småland in southern Sweden. The goal is to collect the bestavailable projecting planning support. The pieces of this projecting planning supportthat will be presented is; Environmental Consequence Description (MKB), productioncalculations, comparisons between different plant types, economic calculations, evaluatethe economy and give some farm design suggestions. The imagined wind farm will belocated in forest environment and which may cause a number of new problems. Specialinterest that will be affected, where special consideration because of the forestenvironmental is requested is, hunting, wetlands, ancient monuments and windturbulence.

Electrical stunning is the method that has been used in Sweden to stun broilers prior to slaughter. However, for reasons of animal welfare and meat quality, research has been made in the EU to develop new stunning methods. Gas stunning is now regarded as the best alternative. In this study literature has been reviewed with focus on different gas stunning systems and observations have been made at two different slaughterhouses regarding animal welfare before, during and directly after stunning. At one slaughter plant carbondioxide was used in a two-stage system where the birds were standing on a conveyer belt during the stunning procedure.

This thesis has been carried out to the Technology Group at industrial plant Tube Mill2012, which belongs to the Sandvik AB. Technology Group is a unit that takes care ofall requirements and suggestions regarding investigations, test runs and designmodifications. The main objective is to identify and analyze the existing initializationprocess to see where improvement opportunities exist and to come up withsuggestions for improvement, supported by previous research and literature. Anextensive literature search and case study has been conducted to provide a solidfoundation to refer to during the work. Completing the interviews and the workshopgave a clear picture of their unstructured work and approach, how the lowrequirements on the received orders caused problems for the group as well as thelack of a standardized resource allocation method provides major delay factors.Solution proposal then became a very easy process model in five steps with all theinformation gathered in one place.