The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.

This paper is the result of a case study conducted at Uppåkra Mekaniska AB during the spring of 2006. The task that was presented by Uppåkra was to develop a basis for a decision for the planning activities at the company, so that in the future they can create lot-sizes which are based upon a total cost perspective. Total cost in regards to lot-sizing is defined as the sum of the administrative reordering costs and warehousing cost per stock keeping unit.To collect data a series of interviews and observations were conducted. This data was then used during the lot-sizing simulation and analysis. The 15 units that the simulation was conducted on were grouped into three item classes depending how many different machine Setups they required during the production process.

The report aims to investigate how well a certain type of affordable embedded single board computer can hold up against today's more expensive computers in a computer system by doing various tests on a system with the specified requirements. The system has a Raspberry Pi as the single board computer which task is to control a camera based on coordinates obtained from a server as well as capture and stream a video signal on a network.The researches were conducted to check how much network traffic a single-chip computer sent in different video formats and how much CPU utilization was required. Studies were also made to ensure the accuracy of the camera control. The researches have been experimental, where several tests have been performed and analyzed.The results show that a sufficiently good accuracy can be obtained from the camera steering unit, in which two different servos have been investigated. When the video format MJPEG and H.264 are used, the single-chip computer is able to transmit a video signal up to 1280x720 at 15 fps.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

This thesis is a feasibility study for a future product development project. The purpose ofthis project is to evaluate the possibilities and difficulties associated with the design of anelectric power assist servo for all terrain vehicles (ATVs). The project has been carriedout in collaboration with Nira Control AB. Nira designs and manufactures electric andelectro mechanic products mainly for the motor sport market segment.Nira Control AB is developing a fuel injection system for a new line of large ATVs oncommission. To be able to compete with manufacturers like Yamaha and Honda thecommissioner should be able to offer optional power assist steering.

This study is an evaluation of the runtime watch function in a OEE software, knownas ProTAK. OEE stands for Overall Equipment Effectiveness, it?s a way to measurethe factories process efficiency. The runtimewatch function allows the user to Setup and monitor certain critical objects that are of importance for the pulp and paper process at the mill. The data from the runtimewatch can be correlated towards the suppliers specification for the components.

Background: There is a newly founded national sports education program. This newly founded national sports program comprises of several different sports of which football is one of them. Before a football player can reach the European- or national elite the player usually is first developed in clubs and their respective academies where a lot of time is spent on fine tuning the players? individual skillsets.The main goal for the NIU program is to develop future elite athletes to different sports. When it comes to football, the Swedish Football Association and the Swedish school board have together developed a study plan which will serve as a guideline for the NIU-football classes in Sweden.

ABSTRACT This research explores how the Work Integration Center (AIC) supports unemployed immigrants in acquiring jobs and how the practical work helps immigrants in entering the labour market. It employs qualitative research approach through semi-structured interviews staff members at AIC and municipal commissioners of education and labour market in the municipality of Malmö. Its aim is to examine how governmental Setup guidelines were represented in the practical work. These guiding principles of the organization are presented at the top of municipality. The findings suggest that even if the staff has no knowledge of the official measures of the integration plans, they have implemented the aims and criteria in their work with the immigrants.

To make wave power more competitive on the market Uppsala University leads projects that examine how to accomplish better efficiency in the production. One of these projects is described in this report and examines whether it is possible to make the production of dovetails more efficient by using an industry robot of type ABB IRB6000 S3 M91. This project is using an already presented working method, from a previous project, which involves that the robot picks up the dovetail and moves against fixed cutting machines where the dovetail will be drilled, threaded and milled. Drilling and threading are the sub operations that will be examined in this project where experiments are made with the presented working method and with equipment from Uppsala University.Experiments show whether it is possible to drill the holes in the dovetail within specifications by using the specific robot and the presented working method. The threading operation is examined theoretically if it is possible to accomplish by using the same working method.

The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

A future expansion of wind power in the Nordic power system makes the balancing for the transmission system operator Svenska Kraftnät (SvK) more complicated. Up to the hour of delivery the balance responsible parties? (BRP) makes prognoses and plans, for consumption and production, to help maintain the balance in the electrical grid. How well this is accomplished is affected by the Setup of the market design. Therefore SvK has proposed the following possible changes in market design: Increase the imbalance costsIntensify the regulation of imbalancesIncrease the temporal resolution on the different marketsPresent the prices for balancing power in real-timeModify the balancing market to simplify auction of consumption bidsA mapping over the BRPs? processes within planning and trading on the day-ahead, intra-day, and the balancing market has been performed in this thesis.

The aim of this study is to describe how a theme about vitamins and analytical chemistry can be planed and implemented in a summer research school managed by AstraZeneca. The description of the theme is intended to be used as an instructor?s guide to upcoming summers-research-schools with the same theme. The students, which participated in the summer school of 2007, went to upper secondary school. During the summer school they were going to investigate the content of vitamin C in different fruits and vegetables.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

Today the individual ventilated cage system (IVC-system) is a commonly used housing system for mice in research facilities. IVC systems have HEPA- filters and are designed to control both supply and exhausted air at cage level, as well as temperature and relative humidity in the cages. This creates an optimal environment for the mouse and at the same time a protection against the risk of cross-infection between cages and the outside environment. The aim of this study was to evaluate the health and welfare of breeding females and pups of two different strains of laboratory mice (NMRI nude mice and C57BL/6N) in three different kinds of IVC-systems; Arrowmight, Allentown and Tecniplast. The NMRI nude (Nu) females gave birth to 18 litters in Allentown, 16 litters in Arrowmight and 15 litters in Tecniplast.