Construction companies are frequently criticized for high prices and long construction time. At the same time, statistics shows that construction workers are on the sick-list for occupational injuries or casualties more than other groups at the labour market.Skanska built a block of flats with tenant-ownerships in Gävle. The construction consists of concrete walls with in-fill walls in the front. The purpose with this degree project is to perform a risk analysis in work environment with focus on repetitive strain injuries and control the time report for in-fill walls manufactured in a field factory. The result of this project will help to make more realistic cost predictions in the future.This degree project has been performed in cooperation with the construction company Skanska.

Sleep is essential for all mammals and they all have different sleep patterns. Wild horses normally spend 2-8.5% of a 24-hour period in recumbent position while stabled horses lie down 11-20%. To fulfil the need of rapid eye movement (REM) sleep the horse must lie down with support against the ground for the head. The lying behavior can be affected by external stimuli such as age, food intake, bedding materials and if the horses feel safe or not. This study investigates the lying behavior of horses on different bedding materials; wood shavings and filled rubber mats (HIT SoftBed®).

Syftet med denna studie är att beräkna de ekonomiska konsekvenserna för Iggesunds sågverk att övergå från diameterbaserad sågklassläggning, som används i dagsläget, till flytande sågklassläggning för delar av sågverkets timmerkurva. Huvudfrågeställningen indelades i olika delfrågor som undersökte hur volym- och värdeutbytet, planerbarheten och produktiviteten påverkades. Studien grundar sig på teorier om den ekonomiska konsekvensen av ett beslut där resonemang om alternativkostnaden ingår, volym- och värdeutbyte av råvaran samt teorier om produktion, produktivitet och planerbarhet. Studiens resultat kommer att användas av Iggesunds sågverk i ett fortsatt utredningsarbete om effekterna av flytande sågklassläggning på hela timmerkurvan. Till detta utredningsarbete har en metodik utformats och ett rekommenderat arbetssätt presenteras i kapitel 7.

C3LOOPS is an application for DJs and VJs based on surface interaction. A system is said to be based on surface interaction if it presents content on a two dimensional, endless surface that a user navigates through zoom, pan and incremental text filtering where processing is tightly coupled with the content without breaking the workflow. C3LOOPS is designed to encourage improvisation and collaboration. During improvisation changes occur rapidly. Allowing navigation through time as well as the two spatial dimensions of an interaction surface the possibility of unlimited undo operations opens up.

The cost for forestry logistics in Sweden is about 25 percent of the total cost of getting the raw material to industry (Anon., 2010). There might be much to gain by taking a look at your supply chains on the logistic side in your company. In this report the logistic chains by Mellanskog for ENA Energi AB in Enköping has been looked in to. ENA Energis plant is a combined power and heating plant and about 99, 5 percent of their fuel consisted of bio energy in year 2009 (ENA Energi, 2011, länk A). The main purpose with this report is to look at three questions: 1. How does the supply chain look today? From forest to industry. 2.

This thesis considers the development of the software for an, newly developed, embedded real-time control system, based on a Periferal Interface Controller (PIC). The control system is developed to be used for several different applications. In this thesis work, software for two different applications are developed. The first task is a time controlled system, while the other task is implementation of aPI-/PID-controller. A user interface is also developed and implemented.The time controlled system is an automatic horse feeder, which is used for feeding horses at certain predefined points in time.

English title: Part-time work among women in Sweden ? what influences choice of working hours? In the 1960s and 70s a large growth in part-time work amongst women in the Swedish labour market took place. A net inflow of workers into the labour market has been suggested as the main source. However, part-time work is still a common phenomenon among Swedish women; in 2004 almost 40% of all women worked part-time, and women are clearly dominating the part-time sector. A gradual changeover from house work to market work is hardly a valid explanation anymore.

The purpose has been to investigate leisure-time centers actual work on children with attention deficit disorder. In addition, the study strives to make leisure-time centers way of working, in relation to their assignments, visible. The study has also compared how the leisure-time centers work and what the research says. The survey was conducted with the help of three exploratory interviews with pedagogues and three-piece observations at the leisure-time centers. It was carried out at three different schools in two counties in Sweden.The results of the survey show that the schools are trying to create clear procedures, though the centers succeed with this in varied degrees.

Renewable energy and the charging of electrical vehicles will increase in the future. Therefore the risk of outages is also increasing, partly because renewable energy is intermittent and the production amount can change fast. Charging electrical vehicles is often demanding high effect in short time, which could make faults occur. It takes more advanced technology to short the outage time. Today Övik Energi has high reliability in the power grid, but in order to maintain the reliability, it is time to prevent problems that can occur in the future. This thesis has presented a suggestion for the placement of fault detectors Protrol IPS2, in which a total of four detectors is proposed.

Construction of an autonomous wind station was a project with the goal of creating a product that could collect wind data from a sensor and then transfer this data to a server wirelessly over the GSM network. The device would be powered by batteries and solar cells and function fully without requiring external power supply. This required that a small computer was constructed and programmed to store and send data at predetermined cycle times and programming of a server that received the sent data. The project also required optimization of power consumption and dimensioning of solar cells and batteries based on this. The construction of this station demanded research both for the selection of hardware and programming software. The computer was based on a microcontroller and a GSM module that sent the data over the 2G network.

The aim of this essay is to get a deeper understanding of a teachers' profession and to get knowledge of how earlier experiences can influence you as a teacher. I have interviewed a female teacher, Pia to get this understanding. As a tool to get the teacher's whole story I used the life story method. In her profession she is influenced by her own importance of security as a child.Her own needs of security has given her an deeper understanding for pupils like herself during the childhood; insecure and afraid. Her understanding for all kinds of behavior among the children has increased by her own experiences.The story shows that Pia is frustrated by the fact that she can't control her own working time.

Cycle time has a direct influence on number of returnable crates needed and therefore a crucial parameter for cost structure and pricing of the user fec in the pool system.For providing the growing market, number of crates has to increase as well as the utilization of existing crates. To accomplish this aim, cycle time for the whole supply chain has to be fully unravelled and understand.The purpose is to map cycle time and stock movements, to see how, where and when crates are being used in the supply chain. The goal is to make a method of cycle time calculation, together with suggestions of improving the pool system and decrease cycle time.The study has been a combination of qualitative and quantitative research and comprises the three biggest wholesalers in Sweden; ICA, Coop and Axfood. Furthermore have 65 grocery shops, connected to the wholesalers, been investigated and mapped.The study has come to a conclusion that cycle time for an average returnable crate is 19 days. The full-size and half-size crates have a bit longer cycle time, 21-22 days, while Dual Height-crates and shallow haif-size crates have 17-18 days.

Scania provides a fleet management system for hauliers who want to control their fleets in anefficient way. The system includes an onboard computer with touch screen called ScaniaInteractor where the driver can access GPS navigation, order support, message service and otherfunctionalities. The purpose of this thesis is to develop a concept for logging the user interactionon the Interactor and analyze the result which enables further development and optimization ofthe interface.A demonstration application is designed, implemented and tested for the purpose of showing thepossibilities and difficulties with logging of interaction. The result shows that logging is quiteeasy to implement and that the amount of produced data is small and therefore not expensive totransfer via GPRS to a central server where searching and analysis can be done. On the otherhand, the biggest challenge lies in the analysis and interpretation of the logged data and to applyit to the development of the interface.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Through the notions of the untimely (l'intempestif) and untimeliness (intempestif) this paper seeks to gain a better understanding of the problematic surrounding and determining the concept of time in Deleuze. By tracing Deleuze's development of the concept of the untimely through Nietzsche and Kant, we are allowed to concretize the concept of time as pertaining to an experience of modernity (modern life), thus enabling us to better determine the place it holds within the philosophy of Deleuze itself - as a constitutive and productive problematic relating directly to the activity of thinking and being philosophically..