Att utveckla en utrustning för mekaniserad slipning..

Information about the risks involved shall be distributed to the people living in the area nearby to potentially dangerous installation. Swedish law stipulates strict requirements on what information should be supplied, but the law itself does not give any guidance on presentation. The main purpose of the study is to give recommendations on how to improve the information brochures. Within the study, eight people working with risk information have been interviewed and seven different risk information brochures have been studied. Also, a theoretical analysis and a practical experiment were performed using brochures from two municipalities.

The project has been provided by Zenit design group and the goal for this project was tomanufacture and perform tests of a prototype that supersaturates water in a continuous flow ofwater. The project has involved finding and sorting out relevant data in scientific papers, books,communication with foreign manufactures and other platforms for information.The project has resulted in manufacturing of a test rig and an oxygen infuser based onmembrane technology. The test rigs purpose was to perform tests on oxygen infusers fordifferent comparison test and performance benchmarks in a in a laboratory provided by Zenit.The project led to satisfying results using the oxygen infuser manufactured by the authors withcomparable levels of saturation to the reference infuser.The theory behind this project is based on medical research, belonging terms will be explainedbut the authors have chosen to delimit the project from the medical area. The reason for this islack of knowledge in this area and its irrelevance to the mechanical engineering education insuch..

Att utveckla en utrustning för positionering av en svetsbrännares horisontalrörelse..

no abstract available.

This study is intended to give an impartial view of a young and complex program in Sweden titled Product Innovation Engineering program. The purpose of this program is to increase innovation capability in Sweden that will result in new companies, patents and economic growth. The results from this study might give some direction to future innovation initiatives, but should primarily serve as a tool for the PIEp participants. The study will focus on investigating the creation of the program as well as the development of its strategy. From weaknesses and strengths within the strategy of the program the study should also attempt to show its future potential.

AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).

In system development it is today increasingly common to use a model-based system development method. These methods that are suited for Agile work with simple and quick updates and implementations of new applications in systems conform to the requirements that are becoming more important today, namely more flexible and less expensive system that still maintain high quality and safety.A company that has been working with this type of system development method for a long time is Genicore AB, which also has developed their own tools and model language in order to better model the information management systems in complex and abstract operations. Genicore AB is trying to spread their method other developers and have therefore taken the initiative to start this study. The method is evaluated and tested by two students with relatively little experience in model-based systems engineering in order to gain a new perspective on how the method functions. The method has been applied to an educational activity in order to test it in a new domain, and this led us to our research question;?What criteria are of particular relevance in the implementation of a MBSD method on on complex businesses??Through literature reviews and interviews, we formed an idea of how model-based system development works from a theoretical perspective, and then continued to the case study conducted on the educational activities at the faculty of IT at University of Gothenburg.

The comprehensive purpose of this Master of Science thesis is to examine which fleetmanagement services for engineering vehicles, ?Fleetech? preferablyought to develop inorder to reach a broad market and meet the demands of contractors.Scanty explained, fleet management is the management of a company's vehicle fleet and theservices can include a range of functions such as driver management and fuel management. Inshort the thesis encompasses four sections:1.Survey of the general contractor industry: The survey has been preformed toevaluate the potential size of the market for fleet management services in the generalcontractor industry.2.Needs analysis: The needs analysis aim was to define what contractors tasks andgoals are, and to determine what functions they want and need from a system.3.The use of CAN and the technical premises: The prerequisite for developing asophisticated and generic system is that vehicle data can be accessed from the CANbuss.The use of CAN standards in construction equipment has therefore beenexamined.4.Specification: An explicit set of requirements have been set to be satisfied by a fuelmanagement service, based on CAN standard protocol J1939.Important conclusions: The use of CAN protocol standards are extensive and the prerequisitesfor developing elementary and CAN based services good. The services should be compatiblewith different manufacture?smachines.

Swedish consulting companies within the architecture-and engineering business exist on a market that is distinguished by an increasing globalization and internationalization. The companies? commissions are based mostly on long-term, personal clientele. These relations are threatened by a huge number of coming retirements and high employee turnover.Consequently these companies need to improve and strengthen their relationships with existing customers, to create long-term employee and customer loyalty. The purpose of this essay was to analyze and evaluate consulting companies´ internal marketing.

Vitamex AB är en nordisk egenvårdskoncern med huvudkontor i Norrköping som tillverkar och säljer naturläkemedel och kosttillskott. Inom Vitamex Production AB finns ett reklamationssystem för interna och externa reklamationer som hanteras pappersvägen. För att underlätta hanteringen önskade man ett webbaserat behörighetsstyrt datasystem. I det här examensarbetet beskrivs utvecklingen av ett webbaserat system där fokus har lagts på användbarhet. För utvecklingen har designteorin Usability Engineering använts.

Detta examensarbete ger en introduktion till Requirements Engineering (RE), kravprocessen i informationssystemutveckling. Det slutliga informationssystemet är i stor utsträckning beroende av en effektiv RE-process. Ett framgångsrikt informationssystem beror på hur väl det färdiga systemet stämmer överens med användarens och andra intressenters behov och förväntningar. Use Case är en teknik som kan användas i RE-processen för att representera krav. Arbetets syfte är att finna de för- och nackdelar som finns med Use Case för att representera krav.

AbstractA continuous improvement of products and production is an important goal for a modern industrial company. A small engineering group located in Sweden came in touch with the authors of this report during the spring semester of 2014. The aim of this report is, as part of the group´s ambition of improvement, to analyse ways in which the quality of component casted parts can be verified. Non-destructive testing (NDT), and methods to use it for quality control, is the main focus of this report. However, fields such as material standards, component casting and quality engineering are analysed as well.

This thesis primarily includes a study on whether companies can develop a mathematical activity that supports students' motivation in mathematics. The work was done together with Midroc Electro, a company that pays attention to the difficulty of recruiting and therefore was interested in investigating how the business world would be able to contribute.The thesis can be divided into three stages. The first part comprised by a exploration into research on student motivation regarding mathematics as well as numerous interviews with engineers to see how the research findings did fit with Midroc Electros reality. In these studies it became clear that the student who aims for a profession whose education or work requires math belongs to the group of students who primarily manage their studies in mathematics, that is, those that have the greatest motivation to work hard and complete their studies.Research information and interviews were compared and resulted in the thesis second part, Midroc Challenge. An activity where students primarily came to learn about the engineering profession and secondly how mathematics can be used in the engineering profession.

Syftet med examensarbetet är att hjälpa ett företag med att införa standardlittera för deras prefabricerade betongelement som ingår i deras Konceptet. Införandet av standardlittera ska resultera till att återfinna och gruppera deras betongelement i CAD-systemen. We did our thesis project at one of the most prestigious Swedish construction companies. We have examined the possibilities of doing sandwich elements to standard elements which would increase the degree of industrialization. The company has developed a concept that is based on a more refined process of industrialization.