In this report a systematic working procedure for risk classification of processing equipment from a maintenance point of view is described. How this system has been worked out is also an important part of the report. The classification system is adapted for use in complex processing plants. Preemraff Göteborg has been subject for the underlying study and application of the system.The system aims to give a good overview of the maintenance related risks at the plant. Furthermore, the analysis result is a good motivation for the suggested maintenance activities and as motivation for extended or decreased maintenance resources in total.

Consumer Information Processing (CIP) handlar om hur vi som konsumenter tar till ossoch påverkas av den information som ständigt omger oss vid en beslutssituation. Ämnethar länge varit i fokus för forskning inom marknadsföring då detta naturligtvisintresserar företagen i hög grad. Tidigare forskning hävdar att när vi som konsumentertar till oss av de intryck som omger oss, bearbetas dessa intryck tillsammans med dekunskaper vi har sedan tidigare (bottom-up processing och top-down processing).Studier har visat att information som tilldelas oss kan ha direkt påverkan på våra sinnenoch hur vi upplever en produkt.Denna studie undersökte hur olika typer av tilläggsinformation påverkade konsumentersupplevda smak av vin. Tolv testpersoner studerades i ett experiment bestående av tresteg där olika betyg presenterades på de viner testpersonerna bedömde. Resultatet avstudien visade att kvinnor i högre grad påverkas av negativ tilläggsinformation medanmän i högre grad påverkas av positiv tilläggsinformation..

Aim Developmental Coordination Disorder Questionnaire 2007 (DCDQ'07) is an international survey tool based on parents' estimation of their child's motor coordination skills. The purpose of this study was to investigate the validity of a Swedish version of DCDQ'07 by finding out how the classification of Developmental Coordination Disorder (DCD) via DCDQ'07 is consistent with the classification of DCD via the motor impairment test, Movement ABC.MethodIn the context of a larger study, a Swedish translated version of the parent survey DCDQ'07 were sent to 4000 randomly selected families with children aged 8 - 10 years in Stockholm County. The classifications "DCD" or "NOT DCD" with cut-off values ??of 56 (9 years) and 57 (10 years) were applied. Forty families were selected from 410 registered responses.

Aim Developmental Coordination Disorder Questionnaire 2007 (DCDQ'07) is an international survey tool based on parents' estimation of their child's motor coordination skills. The purpose of this study was to investigate the validity of a Swedish version of DCDQ'07 by finding out how the classification of Developmental Coordination Disorder (DCD) via DCDQ'07 is consistent with the classification of DCD via the motor impairment test, Movement ABC.MethodIn the context of a larger study, a Swedish translated version of the parent survey DCDQ'07 were sent to 4000 randomly selected families with children aged 8 - 10 years in Stockholm County. The classifications "DCD" or "NOT DCD" with cut-off values ??of 56 (9 years) and 57 (10 years) were applied. Forty families were selected from 410 registered responses.

The purpose of my one year master?s thesis is to add a documentation of a data processing-process of photo- graphs to the administration of archives. The thesis is written from an archival science perspective which is to be seen in my choice of literature, method and questions at issue. To be able to form a documentation of a data processing-process I studied DiBiS, a company specialized in digitalizing old photographs and publish them on a online database. I also added a chapter where I studied how archival institutions used to handle their old photo- graphs in a traditional manner so the reader of this thesis will be able to understand and see the differences be- tween traditional and modern photograph management.

Three methods of sensitivity and unceartainty analysis have been applied to the operative stormwater- and recipient model StormTac. The study area is the watershed of lake Flaten in the municipality Salem. StormTac?s submodels for stormwater, pollutant transport and the recipient are cosidired. In the sensitivity assessment, the model parametres and inputs were varied one at a time by a constant percentage according to the ?one at a time? (OAAT) method and the response of the outputs were calculated.

Just how far is it possible to make learning of new parts for recognition and robot picking autonomous? This thesis initially gives the prerequisites for the steps in learning and calibration that are to be automated. Among these tasks are to select a suitable part model from numerous candidates with the help of a new part segmenter, as well as computing the spatial extent of this part, facilitating robotic collision handling. Other tasks are to analyze the part model in order to highlight correct and suitable edge segments for increasing pattern matching certainty, and to choose appropriate acceptance levels for pattern matching. Furthermore, tasks deal with simplifying camera calibration by analyzing the calibration pattern, as well as compensating for differences in perspective at great depth variations, by calculating the centre of perspective of the image.

In 2007 Swedish Meats, the dominant Swedish meat-producers cooperative sold its slaughtering and processing industry. The goal of a producer cooperative structure is to create value for members through vertical integration, and to strengthen members? market position. When Swedish Meats sold the slaughtering and processing components, it ceased in some respects to serve the function of a cooperative. This is a lost opportunity for both members and non-members, because Swedish Meats as a functioning cooperative could have exploited its dominant market position to positively effect producer?s prices.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

Aim Developmental Coordination Disorder Questionnaire 2007 (DCDQ'07) is an international survey tool based on parents' estimation of their child's motor coordination skills. The purpose of this study was to investigate the validity of a Swedish version of DCDQ'07 by finding out how the classification of Developmental Coordination Disorder (DCD) via DCDQ'07 is consistent with the classification of DCD via the motor impairment test, Movement ABC.MethodIn the context of a larger study, a Swedish translated version of the parent survey DCDQ'07 were sent to 4000 randomly selected families with children aged 8 - 10 years in Stockholm County. The classifications "DCD" or "NOT DCD" with cut-off values ??of 56 (9 years) and 57 (10 years) were applied. Forty families were selected from 410 registered responses.

Worldwide consumption of cheese has increased over the years. The average Swede consumes somewhere around 20 kilograms of cheese per year, which is an increase of a 100 % over the past 50 years. One of the most popular kinds of cheese during the past decades is mozzarella, due to its? use as pizza cheese. Flavor and consistency differ between the traditional kind, made out of buffalo?s milk, and the industrially made kind, made out of cow?s milk.

In 2007 Swedish Meats, the dominant Swedish meat-producers cooperative sold its slaughtering and processing industry. The goal of a producer cooperative structure is to create value for members through vertical integration, and to strengthen members? market position. When Swedish Meats sold the slaughtering and processing components, it ceased in some respects to serve the function of a cooperative. This is a lost opportunity for both members and non-members, because Swedish Meats as a functioning cooperative could have exploited its dominant market position to positively effect producer?s prices.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

The aim of this study was to describe and analyze the problems caused by students that characterize themselves as highly sensitive. The issue of high sensitivity and other categorizations are fiercely debated in the research. This empirical study was conducted in light of literature about high sensitivity, pedagogies, and interview methods. The students answered questions about what makes them categorize themselves and how they believe that the categorization affects their learning and social development. They also responded to questions about what they consider appropriate measures to improve their situation.

We have different kinds of signal processing everywhere around us in our everyday life, in our cellphones, when we are listening to music, watching TV etc. This makes signal processing a very interesting and important technical area, where the demand of skilled engineers sets the limit of what is possible.Working with signal processing requires in-depth knowledge in areas such as mathematics, physics, electronics, and other related areas. For this, it has traditionally been demanded by a talented developer to also master the advanced programming languages such as C / C + + and Assembler.This has begun to change; today there are several companies that offer graphical development environments for signal processing, environments where programming skills are not needed anymore, and the focus can be on signal processing instead.The goal with this project is to build a corresponding graphical development environment to reach an understanding of what is required of these systems, and also to grasp what opportunities that are available within graphic programming. Inspiration for the work has partly arise from some of the tools available on the market, and partly from previous theses that have been written about graphic programming.The challenge lies in creating a program that can execute signal diagrams in real time from given signal blocks, and be able to handle feedback loops in an efficient way and to do so at the lowest "cost" in terms of clock cycles as possible. This should also be compared against to code, compile and run a complete signal diagram directly.To increase the usability it should also be possibility to externally manage in real time the parameters of the signal diagram during execution.The interface is a separate program, which is to some extent similar to Matlab Simulink, where a signal diagram is drawn up graphically by connecting wires between different signal blocks.