This master thesis is a study on how a rategyro triad, an accelerometer triad, and a magnetometer triad can be integrated into a navigation system, estimating a vehicle?s attitude, i.e. its roll, tipp, and heading angles. When only a rategyro triad is used to estimate a vehicle?s attitude, a drift in the attitude occurs due to sensor errors.

In order to detect movements and vibrations on different appliance, especially robots and self-going devices are used different sensors. One of the most used movement sensors are accelerometers. They are three different types of accelerometers one-axes, two-axes and three-axes. They can be analogue or digital. Husqvarna AB uses an accelerometer to detect movements of their self-going lawnmower Automower.

This bachelor thesis is about an ultrasonic sensor, implemented in a bubble chamber in Artis. The sensor consists of the piezoelectric sensor and an electronic control circuit. The control circuit consists of a programmable microprocessor, PIC18F2420 and a circuit, which sends the excitation signal to the piezoelectric sensor, and later receives the echo. This bachelor thesis consists also of a theoretical study, which examines different techniques of liquid level sensing in a chamber. The study discusses which factors are important in liquid level sensing and examine accepted methods.

Syftet är att konstruera en sensor för att identifiera objekt på bilden från en videokamera. Sensorn består av en mikroprocessor som programmeras i assembler samt en enkel CMOS-videokamera och tillhörande analag elektronik. Sensorn är främst tänkt att användas för övervakning inom tillverkningsindustrin..

In the future network-based Swedish Defence (NBD), attaining information superiority will be of great importance. This will be achieved by a network of networks where decision-makers, information- and weapon-systems are linked together. As a part of the development of NBD, we have performed a study of user interface design for a future network-based tool package for analysis of sensor systems, referred to as the C2SR-system. This thesis was performed at Ericsson Microwave Systems AB, Sensor and Information Networks, during the autumn 2002. A pre-study concerning the requirements of usability, trustworthiness and functionality of a user interface for the C2SR-system was performed.

I en ambition att öka effekten och insatsberedskapen i den svenska försvarsmakten har stora omorganisationer skett efter det kalla krigets slut. Den senaste förändringen innebär att värnplikten läggs på is under fredstid och att kontraktsanställda soldater skall ingår i förbanden istället. Detta har medfört reduktioner i personalvolymer, troligtvis för att kunna bekosta löner för de kontraktsanställda soldaterna. Inom flygvapnets markförsvarsförband har reduceringen blivit så stor att vid en spriding av det svenska flygvapnet, finns inte tillräckligt med förband för att skydda samtliga baser effektivt. För närvarande används hundar som sensor för lokalisera fientliga spaning och sabotageförband vid och omkring svenska flygbasområden.

This paper briefly summarizes Bergslagen as a bedrock province in order to give background to the genesis and presence of REE-bearing minerals (short for Rare Earth Elements) in the region. These mineralizations mainly occur along the REE-line, a line aproximately a hundred kilometers in length between Norberg in the north and Nora in the south with a width of a few kilometers. Situated in the southwest of Bergslagen it is currently one of only a few places in Sweden where REE-bearing iron oxide mineralizations are potentially economically viable for mining. Ore microscopy has been conducted in order to characterize an ore sample from Myrbacksfältet, one of few sulphide rich iron oxide mineralizations within the REE-line. Additionally, an electron microscope analysis of a sample from Stålklockan, a suspected REE-bearing mineralization also within the REE-line was confirmed by EDS (short for Energy Dispersive Spectrum) analysis.

Vertical hydropower units has a rotating mass of up to 1000 tons. For the generator and turbine to work well the rotating system is required to be centered in relation to the surrounding structure. This is achieved by means of radial bearings. The dynamic characteristics of these bearings have a strong impact on the overall rotational dynamics of the total system and thus influence the vibrations in the unit. At Vattenfall Research & Development in Älvkarleby ongoing research is taking place on how the bearing parameters should be represented in the rotor dynamic calculations.

This bachelor thesis describes the process of developing a two wheeled robot with activebalancing. The robot is designed to go straight ahead until it reaches a finish line. Then it shallstop to stand still balancing. The workload in the group has been divided according to theprevious individual projects, which are attached. The design of the robot is inspired by theconcept of the Segway.

This bachelor thesis describes the process of developing a two wheeled robot with activebalancing. The robot is designed to go straight ahead until it reaches a finish line. Then it shallstop to stand still balancing. The workload in the group has been divided according to theprevious individual projects, which are attached. The design of the robot is inspired by theconcept of the Segway.

The purpose of this study was to find out if motion movements, e.g. number of lying bouts and lying time with a registered activity monitoring sensor can detect an impending calving and thereby be used as a measure and an indicator for an upcoming calving. For this, automatically step sensors were used and were attached to one of the cows? hind leg. The sensor registered the individual step and movement activity of the cow.

Huvuduppgiften i detta examensarbete har varit att programmera en Android smart-telefon så att den kan kommunicera med en bio-sensor med syfte att skapa automatiska larm vid till exempel hjärtproblem. Hur lösningen har vuxit fram har dokumenterats tillsammans med resultatet av den informationssökning som utförts parallellt inom angränsande ämnesområden.Vid programmeringen har en Service använts för att upprätthålla en prioriterad kommunikationsprocess mellan bio-sensor och telefon. Programprototypen använder även en Widget ? en mini applikation på skrivbordet - som är ett snyggt sätt att presentera mätdata.När denna produkt börjar säljas på marknaden kommer den vara klassificerad som en medicinteknisk produkt. Detta innebär att det finns ett speciellt regelverk för leverantören av produkten att följa.Applikationen är enkel att hantera för användarna men det innebär inte att den alltid är lämplig för alla.

Tractors of today come equipped with a CAN-system. A CAN-system sends information from sensors to electronic control units who process the signals. The sensors measure several interesting parameters such as force, pressure and speed for various components of the tractor. This thesis discuss a force sensor which is placed in the pivot of the tractors three point linkage, the sensor measure the horizontal reaction force from the load that the tractor is exposed to. Signals from this sensor can be used to measure the force from any implement that the tractor is exposed to during an operation.

The work thesis was performed at Assalub a company which is situated in Åtvidaberg. The company works with developing, manufacturing and marketing equipment for handling of lubricants for light and heavier industry. The work thesis it is based on a inquiry Assalub got from MacGregor which is a company within cargo solution, from port to offshore system.For unloading grain and other material from the ship cargo it is used combined inlet feeder and screw conveyor, there the inlet feeder is drilling down through the cargo and feed the screw conveyer with material to further destination. At the bottom of the screw conveyer and the inlet feeder there is a bearing that keep the parts together. However the lubrication of the bearing must be made manually.

AbstractThis work was assigned by a technological company that manufactures gas detectors in which the sensor signal is processed using digital filters. These filters have been developed by a consultancy firm which converted previously used analog filters to digital filters. The purpose of this work has been to analyse inadequate, and sometimes erroneous, documentation from the project in order to provide the company with know-how and tools for further improvement of their products. The work has been done using the simulation software COMSOL which was bought solely for the project. Analysis showed serious flaws as well as pure errors in the consultant?s documentation.