The aim of this report is to investigate, on the basis of two consult agencies perspectives, what the possibilities and obstacles are to integrate the work with antagonistic and accident related risks. The report is based on two consult agencies where each agency´s work procedure is represented by a risk management method. The work with accident related and antagonistic risks is analysed and evaluated compared to four different components. The components are risk management process (IEC´s and FEMA´s model), driving forces, education and competence, and resources to control risk management with COSO?´s ERM framework.

Each year, Heterobasidion spp. is a major cause of economic losses to forestry in the northernhemisphere, including Sweden. New results indicate that pre?commercial thinnings could be at riskfor Heterobasidion spp. infections.

This report is written for a consultant networking company with the purpose to review the development ofthe company's remote connections from a user friendly and security perspective.This includes an investigation of the possibilities to consolidate existing authentication methods foraccessing customers. The problem lies in the amount of methods being used. Through case study wefound that smart cards, SMS-service, software and hardware tokens exist.The only method feasible from a security perspective is smart cards. Since the method is not commonlyused by the company's customers a standardization of it would be counterproductive.Also, the purpose of this report is to investigate how the ongoing internal development of the remoteconnection will affect the company's clients. Within this framework we have also verified a designsuggestion.We interpret, after the completion of the case study, that the internal development of the remoteconnection is marginally affected by legal perspectives.

This report is founded in lack of knowledge concerning the design and layout procedureduring a new engine room construction.The prime question is how the engine room takes its form from idea to construction and whathappens in between. We want to give the reader a better understanding in how the work isdone and why it is designed the way it is concerning layout, ergonomics and safety. Duringthis report we will enhance the knowledge concerning regulations and rules that are of greatsubstance such as SOLAS, Swedish Sjöfartsverket and IMO.By contacting the parties involved in the process in newly designing a vessel and its engineroom, we will assume their approaches and experiences. We will study the work progressfrom planning to construction of a vessels machinery spaces. We will with the help ofinterviews with interested parties get an idea of the approach and also compare the finishedproduct a bit depending on company size and resources.The investigation resulted in a good basis for how a ship engine room design takes shape andwhich aspects are taken into account, however, we found that the existing rules concerningengine room layout was very vague and was seen as the most recommendations.

Diagnosis means detection and isolation of faults. A model based diagnosis system is built on a mathematical model of the system. The difficulty when constructing the diagnosis system depends om how the model is formulated. In this report, a method is described that rewrites the model on such a form that the construction of the diagnosis algoritm is easy. The model is transformed by two state space transformations and the result will be a system on state space form where one part of the system becomes easy to supervise.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

Corporate Social Responsibility (CSR) is about facing responsibilities towards a company?s employees, customers, stakeholders, suppliers and the environment. As customers and consumers came to seek companies that were dealing with CSR a rapid wave of ?forced? implementations of social responsibility began. Fair Travel Tanzania, which has CSR as the foundation of the company, says that they are transparent about what they do and how they give back to the locals, could it be a problem with this? And how do they actually give back to the locals? Is it possible to measure the impact of CSR activities within the company? And if so, how?.

This report represents a comparison between two different tools used to create an online store that was developed by two students at the Technical University in Jönköping. The web shop will be of great benefit to both customers and administrator in a food firm known as Mattias' Livs. The company wanted an online store that facilitates the sale section and gives a full control of their stocks. The aim of this thesis is to create an online store that offers customers the ability to shop online and help the staff to operate the company in a simpler and more efficient way, which reduces the need for human resources and thus leads to less costs for the company. The aim also includes a comparison between the two different tools used to create the online store.

This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

Plagionotus detritus is a threatend longhorn beetle that only exists at one site in Sweden. It is saproxylic and depending on recently dead coarse oak wood for its larval development. Trees at Djurgården, Stockholm that have been colonized by Plagionotus detritus has been studied to find out the habitat preferences of the species and to see what affects the density of beetles in a tree. The bark of some trees and wood from the breeding project at Nordens Ark has also been studied to find out what affects the species reproductive success. The reproductive success was measured in two ways, the larval mortality and the size of the hatching holes.

The Swedish school is today a meeting place for many people with different cultures. The teacher education at Södertörn University have since 2002 been influenced by an intercultural profile. The purpose of this study is to investigate how the intercultural profile of Södertörn University is expressed in preschool- teachers/ teachers work. Is an intercultural approach requested in schools and is intercultural approach useful and applicable in the teaching profession? The report is based on a qualitative study of what intercultural competence means for five preschool- teachers/ teachers who have graduated from Södertörn University.

The role of Islam in integrative work in Swedish societyThe main purpose of this report was to describe the role of Islam in integrative work in Swedish society. Questions connected to the purpose were: Is Islam a possibility or an obstacle to integration? Which arguments are used to describe Islam as a possibility or an obstacle? How are the different views on Islam expressed in integrative work? Which are the consequenses of such views?A qualitative method with an empirical research and a thematic analysis has been applied to the material. The empirical research consists of interviews.The results of this report describe Islam neither as a possibility nor as an obstacle from a political view. By muslims and researchers Islam can be regarded both as a possibility and as an obstacle in integrative work.

The work presented in this report is written at IEIs department on Linköping Institute of Technology. The report aims to increase the assembly efficiency at Wigells AB. The report shall be used as a guide for the implementation of changes at other workstations in the company. Together with Träcentrum in Nässjö, Wigells AB has identified the needs of this study and contacted IEI at Linköping Institute of Technology.In order to implement an efficient assembly line at the company, studies on lean production have been made. This theory has been studied and together with our own views and findings at the company we have analyzed the assembly area.Wigells is a small company that manufactures wood furniture.

This has been a thesis work for an bachelor degree at Umeå university. The work has been done at LKAB?s facilities in Kiruna and its main purpose has been to investigate and construct some conceptual designs for replacing a screen with magnetic separation in KA3 concentrator plant. First all information available about magnetic separation was gathered and studies of magnetic separation at the sorting plant and studies of the plant KA3 was conducted. Companies that manufacture magnetic separators were contacted.

The aim of the thesis was to explore the attitudes toward social documentation held by care personnel, as well as factors that could have an impact on the process of social documentation. The study is based on a survey encompassing 100 respondents working as care personnel at six different eldercare units at Kungsholmen in Stockholm. The data was analyzed by quantitative methods, using a statistical software package (SPSS). The main questions in the study are whether the respondents know how, what and why they should document, what obstacles they experience and what they would need in order to document more or better, as well as whether there are factors that influence their attitudes and knowledge regarding documentation. The key results show that more time is the most common need, and lack of time the most common obstacle to social documentation reported by the respondents. Furthermore, the results show that those who report that they are satisfied with their working conditions are most likely to also report that they know how and why social documentation should be conducted. These results suggest that it is urgent for organizations to create good working conditions in order to increase motivation for social documentation. The results are analyzed using organizational theories.