In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In this report an MCNP (Monte Carlo N-Particle) model is described for the reactor vessel at Ringhals 2. The model is validated against the specific activity in neutron dosimeters, extracted in 1977, 1984 and 1994. The validation showed that the calculations of the model are within the requirements of a maximum of 20 percent uncertainty for every neutron dosimeter except one, extracted after the first cycle. The uncertainty of this cycle was mostly due to the operation data rather than to the MCNP model.The model has been used to investigate various questions concerning radiation damage. The reliability of the traditional measure of radiation damage, fast neutron flux (En > 1MeV) has been evaluated.  This has been done by taking the ratio for this and another measure of radiation damage, DPA (Displacement Per Atom), for various positions and layers.

This thesis investigates whether it is accordance between the different profit measures in the financial market. The first aim of the thesis is to examine if it exists a difference between the profit measures that companies publish in their fourth quarter interim report and the measures that they state in their annual report, issued some months later. The second aim is to examine whether there is a divergence in definitions and the assumption regarding the risk of bankruptcy between profit measures published by companies and analysts. The study focuses on Swedish companies listed on the OMX Stockholm Large Cap and concerns the years of 2006 and 2007. The analysts interviewed are working in Sweden with listed Swedish companies.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

 This abstract describes the bachelor degree thesis in computer technology at Växjö University. The company BSR in Växjö has requested an application that can measure a cars performance, with attributes like acceleration times and engine power estimation. The communication between car and computer is via the USB port on the computer and the OBD-II socket on the car with the network protocol CAN, controller area network. Cars from VAG have been the primary focus group and the application has been tested on a Volkswagen Passat CC from 2009. The system is developed in the programming language C# in the environment Visual Studio with the framework .NET.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

Volvo Trucks is the second largest manufacturer of heavy trucks, with factories in several countries and with around 21 000 employees. At the plant in Tuve, trucks have been built since 1982 and the activity mainly consists of producing side members and to assemble and packing kits of trucks. In 2005, the factory in Tuve launched the ambition to be the first carbon dioxide neutral vehicle factory in the world. This will be implemented by streamlining and investing in renewable energy. The aim of this degree thesis is to map the usage of energy within production, and also to prepare a method to measure key figures (use of energy per produced unit).

The objective of this study is to determine if and how Swedish businesses measure the efficiency of their purchasing departments.In this study I have interviewed six medium to large successful companies and asked them· Which ratios they use to measure the efficiency of their purchasing departments· Why they use these ratios and· How the results of these measurements are usedI can conclude that although there are no ratios or other measurements that directly measure the efficiency of purchasing indirect measures do exist.The measures applied are usually the result of demands from management and the results are reported back to management and used to follow development within a particular field of purchasing. Benchmarking, especially external benchmarking, is unusual..

This report describes a study aimed at uncovering flaws and finding potential improvements from when the modelling tool EAAT is used in conjunction with the modelling language CySeMoL. The study was performed by developing a framework and applying it on CySeMoL and EAAT in real life context networks.The framework was developed in order to increase the number of flaws uncovered as well as gather potential improvements to both EAAT and CySeMoL. The basis of the framework is a modified version of the Quality in use model from ISO/IEC 25010:2011 standard. Upon the characteristics and sub characteristics of this modified model different values for measuring usability where attached. The purpose of these values is to measure usability from the perspectives of both creating and interpreting models.

In this thesis, it is investigated if it is possible to create a common factor of the work tasks done by an air traffic controller, which then can measure workload. This will lead to the development of a tool to measure workload at small airports. In the research project a questionnaire is created to measure the different tasks an air traffic controller has. The same questionnaire will also measure the number of environmental factors that exists around the air traffic controller. To measure the validity of the questionnaire, the authors are using NASA-TLX.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

Quality was earlier only an issue for the company?s quality departments but today is the entire organization involved in quality- and improvements work. With the customers in focus, both external and internal, quality and improvement work should be integrated in the daily activities. The management shall state goals and visions together with a policy. Through participation the correct requirements for a successful work are created.With SPC, statistics process control, there is an opportunity to perceive variations in the process and with the correct tools make it stable.

The aim of this paper is to describe how to measure welfare effect of the deregulation and increased competition of the public transport by railway in Sweden. The paper also includes a numerical example of how to measure the welfare effect. In our study we use public data from SJ regaring quantity and ticket prices for the period 1996 - 2005. We have used equivalent variation, EV, as the method to measure the welfare effect. We demonstrate how to derive the equation to calculate EV by starting with a Marschallian demand function.

Aim: The aim of this study was to examine a way to measure students? knowledge development by using a self-made measure instrument based on William Doll?s postmodern curriculum.Question: Is it suitable to use an self-made measure instrument based on William Doll?s post-modern curriculum theory to measure development of knowledge?Methods: The study was based on process-hermeneutics and was focused on analysingcollege students? written and oral reflective thoughts. The data was collected over three lessons, where six students? written reflective thoughts were handed in. An observation was carried out each lesson for an extra control of validity.