The reason for performing an Environmental Impact Assessment (EIA) is to incorporate environmental concern in different kinds of plans and projects. The purpose of such an assessment is to identify and describe direct, indirect and cumulative environmental impacts.Geographical Information System (GIS) is a tool that can be used to combine spatial extension of both sensitive areas and different environmental impacts in a quick and easy way. Because of that, descriptions of environmental impacts and motivation of different standpoints on a specific issue can be more correct and easier to make if GIS is used as a tool.Hence, GIS can contribute to improve the quality of Environmental Impact Assessments. If the benefits of using GIS are to out weight the costs, geographical information of satisfactory detail, actuality and accuracy need to be available at reasonable prices.In this paper, case studies are carried out for three different geographical analyses to investigate the use of GIS as a tool in EIA. From these case studies, more general conclusions about the benefits and limitations of using GIS for Environmental Impact Assessments are also drawn.

AbstractA prerequisite to be able to use semi-natural pastures in an optimal way is knowledge about their conditions and properties. One thing to consider is the amount of herbage mass that can be produced during one season on different types of semi-natural pastures. That knowledge makes it easier to choose which type of animals and how many you are able to have in each paddock to maintain a high biodiversity and achieve the desired production of the animals at the same time.This study was performed in nine different semi-natural pastures around Uppsala. The paddocks were already mapped with regard to different vegetation types. Exclosure cages were placed on previously fertilized, mesic, dry, shaded and wet vegetation.

The last years? financial situation has contributed to an increased willingness from the banks to handle risks. The most important risk to cope with is a risk that is related to a customer?s ability to repay loans. Forecasts indicate that in the future, Swedish farmers will be facing profitability challenges, which points to a need to reconsider the banks procedures considering risk management in credit granting for agricultural businesses.Today?s risk management will be given two complements in this study.

The last years? financial situation has contributed to an increased willingness from the banks to handle risks. The most important risk to cope with is a risk that is related to a customer?s ability to repay loans. Forecasts indicate that in the future, Swedish farmers will be facing profitability challenges, which points to a need to reconsider the banks procedures considering risk management in credit granting for agricultural businesses.Today?s risk management will be given two complements in this study.

Denna studie har haft som syfte att belysa ledarskapet i grundskolan avseende den studie- och yrkesorienterande verksamheten samt förhållandet mellan ledarskap, personalens engagemang och verksamhetens resultat. Avsikten har bland annat varit att synliggöra om skolorna har ett reellt ledarskap avseende verksamheten eller inte. Bedömningsgrunderna för ett reellt ledarskap har inspirerats av den transformativa ledarskapsteorin. Studien baseras på enkätsvar från 107 yrkesverksamma studie- och yrkesvägledare i Stockholms, Skånes och Västerbottens län. Resultatet visar att den stora majoriteten skolor saknar ett reellt ledarskap avseende verksamhetsområdet samtidigt som flera studie- och yrkesvägledare säger sig vilja inta en ledande funktion för detta.

På grund av ökad urbanisering och exploatering av grönområden i stadsnära miljöer fragmenteras och reduceras arters habitat vilket bland annat ligger till grund för den globalt minskade biologiska mångfalden. För att stärka och förbättra arters möjlighet till spridning i landskapet, och därmed säkra en hög biologisk mångfald, efterfrågas insamling av data och utveckling av nya metoder för att identifiera ekologiska kärnområden och för att analysera habitatnätverk. Syftet med den här studien är därför att 1) kartera och sammanställa biotoper i en biotopdatabas utifrån tolkning av infraröda flygbilder med digital stereofotogrammetri, 2) undersöka olika metoder att samla in data med hjälp av laser- och höjddata, och 3) att tillämpa landskapsekologisk analys på underlag i biotopkarteringen.Resultatet validerar att tolkning av infraröda flygbilder med digital stereofotogrammetri är en utmärkt källa för att kartera biotoper som medför en tolkningsnoggrannhet på 86 %. Valideringen av kateringen genomfördes med fältkontroller som utvärderades i felmatriser. En metod har även undersökts baserat på tidigare studier för att uppskatta busk- och krontäckning med hjälp av laserdata, men eftersom det saknas validering av resultatet bör den användas som en indikator för att visuellt uppskatta busk- och krontäckning i dagsläget.

The heterosis effect and breed group effect of crossbreds between Swedish Holstein (SH) and Swedish Red (SRB) was estimated in this study. Observations on cows born between 1990 and 2012 were used to estimate the heterosis effect and breed group effect for several traits included in the Nordic breeding goals: production, fertility, udder health, calving performance, survival and other diseases. Breeding within the Holstein dairy breed has earlier been focused on increased milk production and conformation. This, combined with an intensive use of individual animals, has resulted in a radical increase of milk yield in the Holstein dairy cow population all over the world. However, this breeding strategy has resulted in increased inbreeding and several functional traits have impaired.

This final thesis is performed on commission of Hargs Bruk Ltd. Hargs Bruk manages one of Sweden?s largest privately owned forests. A main part of the managed forest is situated in Roslagen in eastern Uppland. Since 1934 felling calculations have been performed within the estate every tenth year.

The Swedish Government has decided that Wind power should have a higher contribution to the electricity generation in Sweden. Their goal is that, by 2015, the yearly production by Wind power should generate 10 TWh. In year of 2006, the 760 wind mills in Sweden generated only 0,936 TWh. Despite good wind conditions in a large extend of Sweden's land- and coast areas, the slow rate of new wind mills establishments will likely result in unattainable goals. The major problem for new establishments of wind mills is the extensive and complicated permission process. An expert group of environmental studies (Expertgruppen för miljöstudier) was commissioned by the Government to make a report concerning the problems with the expansion of wind power in Sweden.

Sitka spruce (Picea sitchensis (Bong.) Carr) is just like Norway spruce (Picea abies) a species in thegenus picea. The natural range of Sitka spruce is a narrow strip along the west coast of North America. Itis the most coastal of all picea species, and very dependent on the mild and humid climate along thepacific coast.Sitka spruce has been grown a long time in the countries around the North Sea, particularly in GreatBritain where it currently is the most important species in British forestry. Sitka spruce has not beenplanted in Swedish forests to any large extent before the storm Gudrun in 2005. Several studies indicatethat the production of wood biomass is higher for Sitka spruce compared to Norway spruce.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

The purpose of this study was to evaluate which apple cultivars are best suited for production of juice and cider. The study was limited to 41 cultivars. Common as well as uncommon apple cultivars were selected from available cultivars in the cold storage at Balsgård, Department of Horticultural Plant Breeding and Biotechnology, SLU.The practical part of the study consisted of the apples being pressed, and then the juice characteristics being assessed by appropriate criteria and methods of analysis. The analyses consisted of measurment of soluble sugars with a refractometer (Brix), titration of total acidity, determination of total phenolic content with a spectrophotometer, estimation of alcohol content by density meters and qualitative taste tests.The study did not account for different maturity of cultivars. Different apple cultivars were pressed on separate occasions, before and after Christmas 2010.

Aquatic organisms are usually not exposed to single substances but rather to mixtures of toxicants in streams located in agricultural areas. The transport of pesticides used in the agricultural area in Sweden is monitored with continuous environmental supervision every year. During 2002-2008 an average of 10 pesticides were found in each sample and 40% of the samples contained substances with concentrations higher than the Water Quality Standards. Chemical risk management is normally based on single-test evaluations. A problem when assessing mixture toxicities is that the constituents and concentrations of pollutants in the environment vary greatly.