The following article consists of two parts; one part is about house construction and the other is a specialization about radon. The house construction part describes how to project a house from start. It contains the conformation of the house, the installations needed, calculations considering the strength of the construction, energy calculation and what materials were chosen. Calculations considering the costs of building and operate the house has been carried out. The result showed that the house would cost approximately two million Swedish kroner to build and thirteen thousand kronor a year to operate.

We have the tradition in Sweden to build villas and houses with a wooden framework. It has become natural for us because we have so much forest in our country. Building with wood has advantages, it is easy to process, but also disadvantages, as it is sensitive to moisture.Finland has long made use of the thermal blocks to build villas. It is a type of bricks that are a bit like a sandwich element, with a core of EPS and concrete on both sides of the core material. The concrete is hollow, so that after the walls has been bricked up you pour concrete into the hollow bricks.The issue of this report is to find out if concrete can be an alternative to wood as framework material in villas.

In this diploma work the approach of determining the required amount of reinforcement in slabs exposed to pure tension is processed, on behalf of Ramböll Uppsala. It is a well-known problem in the industry that there are uncertainties in the determining of the amount of crack reinforcement, especially for structures exposed to pure tension. Cracking caused during the time of dehydration in concrete slabs is the most common defect according to statistics made by CBI[1], which provides numbers as high as 35 % of all the defects caused on slabs are generated by cracks. Comparisons between Sweden's former national standard BBK 04, Building Regulations for concrete structures due to restrained forces of shrinkage, and the current European standard Eurocode 2 are carried out through theoretical studies and concludes with several examples of calculations. Rigorous calculations of both standards, BBK 04 and Eurocode 2 with application of the national annex in Sweden and Denmark are performed.

In the farrowing pens the amount of bedding material and the quality of the concrete floor has a huge impact on both the sow and the piglets. In this study imbedding of rubber flooring on the solid area in the farrowing pen was used to see if it had any effects on the sows lying behaviour when compared to concrete. Another important aspect was to evaluate if the rubber floorings had a high enough durability to resist the normal wear in a farrowing pen. Concrete flooring is assumed to have a higher thermally conductive effect then rubber which can affect the sow?s chance to cool down.

We have the tradition in Sweden to build villas and houses with a wooden framework. It has become natural for us because we have so much forest in our country. Building with wood has advantages, it is easy to process, but also disadvantages, as it is sensitive to moisture.Finland has long made use of the thermal blocks to build villas. It is a type of bricks that are a bit like a sandwich element, with a core of EPS and concrete on both sides of the core material. The concrete is hollow, so that after the walls has been bricked up you pour concrete into the hollow bricks.The issue of this report is to find out if concrete can be an alternative to wood as framework material in villas.

The purpose of this study is, by groupinterviewing students in upper secondary school, to investigate students comprehension of equality on a principle level and a concrete level. The questions at issue are as follows; how is the comprehension on respective levels described and is there any difference or similarities between the two levels? Further more, this study also aims to end with a discussion regarding the result from the mainpurpose in relation to the educational environment. In my conclusion there is to be find a certain difference between the comprehensions of equality on the two levels. The conception of equality is in the beginning principled and there is no exception from the worth of every individual but however, when the conception is brought out in reality it gets depended of its context and the comprehension for equality becomes more dynamic. The project will be completed with a discussion regarding the results in relation to the educational environment. .

In a world where digital media is becoming a greater part of people?s everyday and working lives it is plausible to assume that the upcoming generation of pupils expect the teaching media to adapt thereafter. It is this assumption of an increased demand that Natur & Kultur is hoping to be able to meet. This thesis has been a stage in the process of producing digital material in the subject of mathematics for high school students. Specifically the aims of this thesis have been to make a rough description of the largest competitive companies? products within the same market, explore and put together a brief theoretical foundation of contemporary research and produce concrete examples of ideas for digital applications.

In this diploma work the approach of determining the required amount of reinforcement in slabs exposed to pure tension is processed, on behalf of Ramböll Uppsala. It is a well-known problem in the industry that there are uncertainties in the determining of the amount of crack reinforcement, especially for structures exposed to pure tension. Cracking caused during the time of dehydration in concrete slabs is the most common defect according to statistics made by CBI[1], which provides numbers as high as 35 % of all the defects caused on slabs are generated by cracks. Comparisons between Sweden's former national standard BBK 04, Building Regulations for concrete structures due to restrained forces of shrinkage, and the current European standard Eurocode 2 are carried out through theoretical studies and concludes with several examples of calculations. Rigorous calculations of both standards, BBK 04 and Eurocode 2 with application of the national annex in Sweden and Denmark are performed.

The purpose of this study was to build a database for point-bearing piles in dense noncohesive soil, predominantly moraine. Further, the database was analysed and areas with difficult geotechnical conditions was identified.The database includes for point-bearing piles driven to refusal in moraine. Piles with mainly shaft friction have been excluded. Only concrete piles have been included. Geographically the database covers almost all geotechnical conditions of Sweden.

AbstractConcrete foundation slabs are usually exposed to unilateral drying during the curing process. The unilateral drying causes an axial shrinkage and a concave curvature of the construction. The curvature results from the fact that the upper part of the slab is drying and shrinking faster than the lower part. This is called gradient shrinkage.A problem occurs when the slab is considered fully restrained by adjoining structural parts. The deformations caused by axial contraction due to the constant part of the shrinkage and the curvature caused by gradient shrinkage of the slab are then prevented by the fact that the slab is fully restrained.

Betong är vårt vanligaste byggmaterial men cement står globalt sett för 5 % av CO2-emissionerna. Med detta som bakgrund så har CBI Betonginstitutet anordnat en tävling, där målet är att nå den högsta tryckhållfasthet i en resurssnål betong, med enbart 200 kg cement per m3. Syftet med denna rapport är att utvärdera tävlingen, vilket har utförts genom en omfattande litteraturstudie. En första analys av de olika betongrecepten medförde att olika grupperingar kunde urskiljas. Ur dessa fanns det tre stycken vars resultat var väldigt bra. ? Concrete Innovation Centre, som med ett lågt vct, stora mängder granulerad masugnsslagg (81 %) och lite silikastoft (5 %), uppnådde en tryckhållfasthet på 80 MPa vid 28 dygn och 95 MPa vid 56 dygn. ? CBI Stockholm, som genom användandet av ulltrafint filler och silikastoft (4,8 %), uppnådde en tryckhållfasthet på 84 MPa vid 28 dygn och 98 MPa vid 56 dygn. ? Thomas Concrete Group som genom att ersätta cementet med en medelmåttig mängd granulerad masugnsslagg (54 %), liten mängd flygaska (9 %), kalkfiller och silikastoft (5 %), uppnådde en tryckhållfasthet på 94 MPa vid 28 dygn och 98 MPa vid 56 dygn. Det finns således tre recept som vidare studier kan vara rättfärdigade på, de tre ovan nämnda. Det bör tilläggas att en imponerande tryckhållfasthet på nästan 100 MPa, kan uppnås i en betong med enbart 200 kg cement per m3. .

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

Tryckhållfasthetsutveckling hos broar. En studie av svenska broar byggda under 1900-talet.

When constructing an industrial- or hall building, the most common framework materials thatis used are wood, steel or concrete. Due to an assignment from Byggnadstekniska Byrån ABhas a document been created that makes it possible to investigate how the final costs is af-fected by gapes in between elements and which used foundation. And this with steel as thematerial. The purpose with this essay is to investigate which is the most well fitted materialwhen constructing an industrial- or hall building wood, steel or concrete. Information aboutthe different materials has been collected by litterateurs and by different internet pages.

Soft rubber flooring have gained in popularity over the last years. Rubber flooring al-lows cow to move more freely without slipping and improves claw and leg health. The purpose of this study was to investigate the influence of a stepwise introduktion of soft flooring on cow`s placement in cow houses with robotic milking. A case study was carried out in a herd in northern Sweden with 41 cows. Observations were made every 15 minutes between 09.00 and 16.00 concering cow placement in cu-bicles, in cubicle alley, in feeding alley and in feeding alley with the head through feed-ing gate. One observation period was carried out per flooring alternativ: 1) all concrete slatted floor, 2) rubber slatted floor in feeding alley and concrete slatted floor in cubicle alley and 3) rubber slatted floors in feeding alley and solid rubber floors in cubicle alley. The study showed that 6 %-units fewer cows lay in the cubicles when the feeding alley surface was slatted rubber.