I den här rapporten undersöks Command Query Responsibility Segregation (CQRS),Event Sourcing och Task Based User Interface (händelsebaserat gränssnitt) somtillsammans bildar en annorlunda arkitektorisk uppbyggnad av system. Tanken bakomarkitekturen är att kunna spåra vad, när och hur data förändras i ett system samtmöjlighet att återskapa tidigare tillstånd, jämfört med traditionella system som endastlagrar, hanterar och presenterar data i dess nuvarande tillstånd. Undersökningen hargjorts genom att ta fram en bokningsprototyp och resulterade i för ?och nackdelar,användningsområde och hur CQRS, Event Sourcing och händelsebaserat gränssnitt kanimplementeras tillsammans..

Chunks and Tasks is a programming model based on the C ++ programming language. This programming model is used for electronic structure calculations, among other things.The purpose of this project is to improve the CHT-MPI software library for Chunks and tasks, so that calculations of matrix-matrix multiplications are performed more efficiently than they do with the existing software library. The software library is based on the work stealing method, which is a method the software library for Chunks and Tasks uses for the distribution of the calculation work. The considered way to improve the software library is by modifying the work stealing method in a way that makes the distribution of calculation work happen in a more efficient way , which will lead to calculations performed faster than before.Two different modifications of the work stealing method were tested and it led to two new methods, Method 1 and Method 2, which distributed the calculation work differently. Method 1 did not give results that were compatible with the theory, since the calculation time with this method was much longer than the previous method.

This project have been made whit Krima Rostfritt AB. They manufacture a number if different add on products for trucks and now wants to develop there locket were the hatch opens upwards after requests from customers. The costumers have requested a pneumatic opening to make the opening procedure easier.Krima has there biggest markets in Sweden and Norway, because of that the locket has to meet whit the regulations of these countries. The locket also has to meet the demands that Krima has determined from experience to maintain there high standard.The project has resulted in a solution where the locket and cylinder are linked whit a strut. This solution was the one best suited for the task and the one that Krima preferred..

The purpose of this study has been to explore definitions of violence performed in the name of honor, and the conditions under which the phenomenon occurs and is upheld. Furthermore, the study aimed at exploring how the Swedish expression for violence in the name of honor, ?hedersrelaterat våld?, is used within the Swedish media. To achieve these purposes, previous research in this matter was reviewed, as well as an analysis by means of categorizing the content of news articles from two Swedish daily newspapers. Previous research has showed that this type of violence occurs foremost within cultures upholding patriarchal structures and traditions, and women?s (non-)sexuality is looked upon as being of an utmost importance for the family?s honor.

The purpose of this study was to evaluate enantioselective analytical methods by separation of the enantiomers of four drugs (citalopram, zopiclone, tramadol and methylphenidate) and their metabolites. The analyses were performed with HPLC-UV with columns whose stationary phases were based on macrocyclic glycopeptides (Chirobiotic V, V2 and T) and polysaccharides (Lux Cellulose-1, Cellulose-2 and Amylose-2).The Chirobiotic V column showed high selectivity for citalopram and its metabolites. High resolution was obtained using a mobile phase consisting of methanol, acetic acid and ammonia. High selectivity for the enantiomers of zopiclone and its metabolites were obtained on the Cellulose-2 column using a mobile phase consisting of acetonitrile and ammonium acetate buffer.The enantiomers of tramadol were separated with the Amylose-2 column. However, changes in the pressure arose, probably caused by the additive NH4HCO3.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

The quality of a design can improve essentially through a participatory designprocess. Initially, The Mulberry School project was supposed to be finished in two months but the involvement of artist Scott G Burnham extended the work and brought a new dimension into the project. In the beginning, Scott and I both worked on the project unaware of each other. I was appointed by the architect to design the external areas of the school and based on a site survey and analysis of the factors infl uencing the site I created a design proposal with the concept form and function. At the same time Scott performed a series of workshops initiated by the school. The purpose and goal was to include the students in the redevelopment of the school and to produce a design based on the thoughts and wishes of the students.

This report is a bachelor thesis work within the field of Product Development and is also an assignment for Thule Sweden. The work has been performed by Niclas Tjäderborn and Christian Holm, students at the Mechanical Engineering Program with major in Product Development and Industrial Design at Jönköping School of Engineering during spring the semester of 2009.The thesis work concerned the development of a new wheel holder for bike carrier for Thule Sweden. The background to the project was that the initiator wanted a more user friendly wheel holder with better design than those available on the market. The wheel holder is able to be implemented on one or several of Thule?s current wheel holders.

Pharmaceuticals that are found in marine ecosystems are a threatening environmental concern, which is known to harm both animal and plant life. One of the reasons for this problem is that the waste water treatment techniques are not optimized to clear waste water from its pharmaceuticals contain. In this master thesis four Swedish treatment wetlands were studied, and their ability to reduce numerous pharmaceuticals in waste water. The four treatment wetlands that were studied were those in Oxelösund, Trosa, Nynäshamn and Eskilstuna. Two ecotoxicological tests and chemical analysis were used.

AimThe aim of this study was to evaluate the activity recorded with electromyography (EMG) fine-wire electrodes, in transversus abdominis (TrA) and rectus abdominis (RA) while performing various stabilization exercises, and to investigate how the level of activation was affected by specific instructionsMethodTen physically active women (27.1 ± 5.5year, 1.74 ± 0.05 m, 67.1 ± 8.6 kg) performed six different stabilization exercises (four lying supine with bent knees and hips and two in four point kneeling). They performed two sets of exercises, the first without and the second with specific instructions. The specific instruction was ?abdominal hollowing to activate? TrA. The fine-wire electrodes were inserted bilateral into TrA and RA with an injection needle with guidance from an ultrasound.

Aim Developmental Coordination Disorder Questionnaire 2007 (DCDQ'07) is an international survey tool based on parents' estimation of their child's motor coordination skills. The purpose of this study was to investigate the validity of a Swedish version of DCDQ'07 by finding out how the classification of Developmental Coordination Disorder (DCD) via DCDQ'07 is consistent with the classification of DCD via the motor impairment test, Movement ABC.MethodIn the context of a larger study, a Swedish translated version of the parent survey DCDQ'07 were sent to 4000 randomly selected families with children aged 8 - 10 years in Stockholm County. The classifications "DCD" or "NOT DCD" with cut-off values ??of 56 (9 years) and 57 (10 years) were applied. Forty families were selected from 410 registered responses.

The research work performed in this thesis has been carried out at the Production Tech-nology Centre where the Thermal Spray research group of University West has its work-shop and labs.This research work has been performed in collaboration with the International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Hyderabad, India.First of all, I would like to express my sincere thanks and gratitude to my supervisors Dr. Nicolaie Markocsan and Dr. Nicholas Curry for their guidance, great support and valuable suggestions without which this work could not have been possible. I would also like to thanks Prof. Per Nylén for keeping faith in me and providing me an opportunity to work at PTC, which is a great place to perform research.

AbstractThe purpose of this essay is to investigate the views Swedish elementary school teachers produce on the subject of ethics. The teachers? thoughts on selection among ethical notions is described and also how these notions are assessed. The essay proceeds from the central content and the knowledge requirement in the syllabus of religious knowledge.The empirical survey is based on qualitative scientific interviews with four teachers employed in grades 4-6 at different schools.The teachers find ethics in its current state of the syllabus hard to define and they find encounters with parents and pupils difficult in their tasks. The selection of ethics is decided by previously planned basic values education or from conflicts erupting during schools hours.

The purpose of this study was to analyze the two thinning models: Bergvik Skog´s thinning model, which is based on total stems and dominant height, And Swedish forest agency´s thinning model which is based on basal area, habitat index, dominant height and recommended number of stems at final felling in Heureka´s StandWise and PlanWise. The data we chosen for our study were taken from the Swedish National Forest Inventory and we were creating a simulated stand based on a great number of sample plots in Region three from The Swedish National Forest Inventory. We had chosen to create one stand with low habitat index (T20) and one with high habitat index (T24). Our purpose were to come as close as possible to a natural stand in central Sweden. We performed the thinning in StandWise and analyzed the data I Excel files. Our thinning optimizing´s were performed and analyzed in PlanWise. There wasn´t any big differences between the thinning on the lower habitat index.

We have 3G on the doorstep but nothing seems to attract ordinary people to this technology. To attract the mass market the telecom industry must show something beyond high bit rates. They must show how ordinary people can take advantage of this new technology. This is done by showing the possibilities of the new technology and by demonstrating applications that it will handle. The telecom industry must convince the telecom operators to invest in this technology and the only thing that matters to them is how much revenue they can make by adopting the upcoming technology.