The aim of this thesis is to investigate what distinguishes the views of staff at centres for learning as regards users? motivation at centres for learning in public libraries. The following questions were asked:? How do staff at centres for learning view the users? motivation to studies?? How do staff at centres for learning view causes for lack of motivation and obstacles for motivation to studies?? What methods do staff at centres for learning use to motivate potential users to studies and to market the learning centres? ? What distinguishes these views of staff on users? motivation at centres for learning in public libraries?The methods used in this study are: literature studies, qualitative interviews and questionnaires. Interviews and questionnaires were done with six employees at six centres for learning.

In conjunction with today?s increasing competition within the construction sector, more pressure is being placed on building contractors. Efficiency and improvements are necessary but without impairment to an ergonomic and safe construction site. This in is in order to reduce the construction costs and time but to retain the ability to deliver a high-quality contract.Various methods and prefabrication degrees are used, depending on the project's requirements and conditions. This analysis sets out to investigate and exhibit what qualifications are important when choosing a construction method for curtain walls.Advantages and disadvantages with each method have been analyzed and recommendations have been given to show when different methods are best suited.

This thesis aims to explore the use of costumed interpreters at museums. Firstly the thesis examines how extensivethe use of historical costumes is in Sweden, along with some international comparisons. Later on the differentways that the clothes are used is examined, and the costume as a resource for learning is discussed. In the lastpart of the thesis the ?function? of the costume is examined.

Jumper´s knee is a common overuse injury due to repetitive microtrauma to the patellar tendon. It is especially common among athletes who are involved in sporting activities that involve jumping or fast running. The term jumper´s knee was adopted after Blazina published his original paper in 1973. Its pathology can be considered as a partial or total rupture of the patellar tendon in one of its three insertions. The aim of this literature study was to review the methods used to treat this condition and the results obtained focusing on pain relief and returning to previous sport or level of activity.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Title: Artistic methods for persons with dysfunctions.The idea to the paper was born in my work, as a pedagogue, with young persons with dysfunctions. My pedagogic method is eurhythmics but I wanted to examine in what other ways you could work with artistic expression in similar areas such as circus, dance therapy and psychodrama. These areas were chosen because they have components that are interrelated, which I find very interesting. Mind and body are considered from a holistic point of view. The purpose of this paper is to bring about a better understanding of how persons with dysfunctions respond to various artistic teaching methods.

In this study I have compared two different development methods of reading and writing. I have done this by interviewing five first grade teachers in elementary schools and it is based on qualitative research interviews. The aim of the study was to immerse myself in which methods these five teachers describe that they have used. They got to describe how they work and how they have tought the students to read and write. I have investigated if the teachers think that the computer is a good tool. The investigation also shows if the teachers believe that the students´ writing skills deteriorate if they can use the keyboard instead. I came to the conclusion that four of the teachers used Arne Trageton´s method (2005) which means that the students learn how to write by using to computer.

This study focuses on the development of methods for sexual determination of human skeletal remains, mainly between the years 1981 to 2007. By comparing an older analysis from 1983 (Persson and Persson) with my own on the same material, a difference of 40% was shown, which indicates that the methods has changed through time, and that these should not be used for newer conclusions about a population if the method is not throughoutly described.The main cause of the difference was identified as a change in the reliability of the sexual indicators, rather than a total change of method. Any general tendencies did not show, it is however considered that the pelvic bones are able to make a better conformity between the analyses as opposed to using the cranium..

The purpose of this study is to contribute to our knowledge about what methods? teachers say they use in the work with pupils? early reading acquisition, and how they evaluate the pupils´ reading development. I also like to find out what educational interventions teachers believe that pupils with reading difficulties need, and how they say they work to meet the needs of these pupils. The project is based on the following questions: What methods do teachers say they use in the work with pupils early reading acquisition? What extra resources do teachers consider that pupils with reading difficulties need? How do teachers evaluate children's reading development? In order to answer my questions, I've done qualitative interviews with three teachers, at two schools, in two medium-sized municipalities.

The concepts of environmental scanning and Business Intelligence have gained increased interest over the last years in a number of different organisational contexts. The research in this field has mainly been dealing with methods and issues regarding organisation but the aim of environmental scanning, the forming of new perspectives, has been largely ignored. The purpose of this thesis is to study how Swedish joint-stock banks put environmental scanning and Business Intelligence into practice. First a literature study is made to create a background and to explain the different conceptions. Then I describe the different functions of the different services in Swedish joint-stock banks.

Introduction: First line managers in the public sector, are under a great pressure from both senior management, leadership, politicians and often from a large group of employees. Few studies have been made on the first-linemanagers psychosocial work environment, even though in the studies found that the manager affects their employees work environment.Aim: How first line managers in municipal elderly describes the psychosocial work environment on the basis of demand-control - support model.Methods: The study was conducted through individual interviews with six first line managers. Respondents were recruited through a strategic selection in a medium-sized municipality in Västernorrland. The interviews were conducted using an interview guide. Qualitative content analysis with an deductive approach was used as a method of interpretation of the results.Results: First line managers point out the difficulty in balancing the requirements and several managers also mentioned the importance of having clear role descriptions and objectives.

This report reflects an examination work performed for Getrag All Wheel Drive AB during the spring of 2005. Among the companies range of products there exists some concern regarding the amount of clamping force and friction on bolted joints caused by the assembly torque.The aim of this project has been to determine if there is a simple way in which to identify and then practically apply testing methods for clamping force and friction through utilization of existing testing equipment.Three separate methods of clamping force and friction determination have been tested in rear drive unit, RDU, at a 30 Nm assembly torque. A fourth and final method, screw elongation with ultrasound, has been used as reference. The methods are:?Torque-Tension test.?Screw elongation with micrometer.?Joint stiffness test.?Screw elongation with ultra sound for reference.The results from tests can be viewed in table below.MethodTorque-TensionMicrometerCs=318 kN/mm Assembled with torque wrenchMicrometerCs=318 kN/mm Assembled on lineUltra-soundCS=311 kN/mm Ultra- soundCS=318 kN/mm Joint stiffnessTheoreticalClamping force-21,8 kN17,6 kN17,3 kN17,6 kN17,1 kN17,3 kNFriction-0,110,1470,1530,1470,1520,149.

This thesis has been focused around the Diels Alder reaction with the goal to design an enzyme catalyzed reaction pathway. To achieve this goal computer aided enzyme design was utilized. Common traditional methods of computational chemistry (B3LYP, MP2) do not do well when calculating reaction barriers or even reaction energies for the Diels Alder reaction. New calcu- lation methods were developed and tested. This was the focus of the first part of the thesis, by choosing a small system, extensive and heavy calculations could be done with CBS-QB3.

This thesis was conducted at AB Fredr Wagner in Ösmo in Nynäshamn, Sweden.AB Fredr Wagner provides solutions for the graphic industry and has been asked by acustomer to develop a product that can simplify handling of EUR-pallets, namely amechanical arrangement, further called pallet exchanger that can switch from anempty pallet to a fully loaded one using only hand force.The goal with the thesis was to create design documents for a pallet exchanger, andalso from those documents to manufacture a prototype for testing and evaluation.A field trip was made to the customer, IKAB mailing in Huddinge, where the palletexchanger is thought to be placed. The purpose of this field trip was to get an insightinto the current work condition and need of change, as well as to gather informationregarding the requirements when it comes to size and robustness of the palletexchanger. Existing equipment on the market that can perform similar tasks werestudied in order to find an optimal solution for the actual pallet exchanger.After the field trip and gathering of information the concept generating phase began.The method used for generating concepts was brainstorming. To decide on whichconcept to use, a concept selection matrix was created. The selection criteriaincluded in the matrix came from the requirements for the pallet exchanger.

According to the curriculum for the Swedish preschool system, children?s development and learning should be documented and analyzed in order to evaluate and develop the preschool quality. Social criticism is directed to some of the methods of documentation for assessing the children´s individual knowledge development. The purpose of this study was to examine how, what and why some teachers use documentation in preschool. I wanted to examine which methods preschool teachers used when they documented the children and what they focused on.