This thesis is ordered by Peab Sweden AB Regional Jönköping and concerns of warranty inspections.The intention is to work out a basis, which show the most common complaints is the warranty inspections, and make a small analysis on what causes them to be. The report also presents possible solutions to prevent the occurrence of defects. It also covers the issue of how the client looks at Peabs way to overcome the objections of warranty inspections. The report has the following issues:?What are the most common errors observed during the warranty inspection??What are the causes of complaints??What can be done to reduce the number of complaints??How the customer thinks that the complaints be addressed?Twenty-five Guarantee survey records from the projects Peab has done in recent years has been the starting point for the investigation.

A possible way to reduce pollution and slow down the process of global warming is to increase the usage of renewable energy sources. One of these renewable energy sources is solar power. With the aid of solar panels and solar cells the energy from the sun can be transformed into both heating and electricity. The requirement to use the sun in this fashion is a suitable surface, for example a big roof, an angle between 40-60 degrees and that the surface should be exposed to the south. Almost every farm meets these requirements.

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

This thesis is ordered by Peab Sweden AB Regional Jönköping and concerns of warranty inspections.The intention is to work out a basis, which show the most common complaints is the warranty inspections, and make a small analysis on what causes them to be. The report also presents possible solutions to prevent the occurrence of defects. It also covers the issue of how the client looks at Peabs way to overcome the objections of warranty inspections. The report has the following issues:?What are the most common errors observed during the warranty inspection??What are the causes of complaints??What can be done to reduce the number of complaints??How the customer thinks that the complaints be addressed?Twenty-five Guarantee survey records from the projects Peab has done in recent years has been the starting point for the investigation.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

Storstäderna växer och folk vill bo allt mer centralt, men det finns inte mycket yta att bygga på ifall man inte vill offra naturområden. En lösning är att bygga på höjden, det vill säga öka antalet våningar. Det är vad denna uppsats handlar om och hur bostads- och hyresrättsföreningar kan dra nytta av detta genom att öka sin ekonomiska vinning, samtidigt som de gör samhället en tjänst och är med och mättar behovet.Det denna uppsats kommer att behandla är hur ekonomin i olika föreningar ändras i samband med takpåbyggnad med en eller flera våningar och hur detta skiljer sig utifrån olika tekniska lösningar. Syftet är att utifrån detta skapa en uppsats som kan gagna framtida fastigheter som överväger att göra en sådan ombyggnation. De metoder vi kommer använda är granskning av dokumentation och handlingar från olika föreningar som har genomgått en takpåbyggnad av en eller flera våningar.

Denna rapport är en del av ett examensarbete på avdelningen för "Byggteknik och design" med inriktning "husbyggnad, projektering och konstruktion" på Kungliga Tekniska högskolan i Stockholm, Sverige.Rapporten handlar om byggandet av ett tak för en skolbyggnad i byn Lwengo Basilla som ligger i sydöstra delarna av Demokratiska republiken Kongo. Skolprojektet finansieras av en ideell organisation i Sverige som heter "Elikia na Biso" och leds av Miza Landström. Designen och konstruktionen av skolan har tagits fram med hjälp av studenter från olika avdelningar inom Kungliga Tekniska högskolan (KTH). En grupp studenter från KTH hjälpte till att lägga grunden och väggarna i skolan. Nästa grupp av studenter skickades för att hjälpa till med byggandet av skolans tak.Denna rapport fokuserar på att dimensionera och konstruera taket på skolan med hjälp av lokala material på ett effektivt sätt.

The purpose of this Master Thesis has been to investigate the possibilities for a new type of noise reduction solution that could decrease the negative effects resulting from larger traffic roads. The idea has been to construct a noise barrier with a roof ? like a tunnel placed on a road. The choice of material has been focused on transparent materials in order to lower visual intrusion and barrier effects. This project idea is called the Noise tunnel.After having investigated the current offer of noise solutions, it has been concluded that these solutions rarely provide a sufficient level of noise reduction ? at least not when government regulations of acceptable noise levels are applied.

For nearly twenty years people have been talking about Product models, but given that the building industry is so conservative, it is hard to implement new working methods. Product models are these days known as Building Information Modeling, BIM. People often say they work with BIM but they often forget the most important part, the information. A 3D model should be linked with characteristics and information. Information that can be invaluable for the facility manager.We have a vision that in the best of worlds the facility manager would be able to "walk" into the model and see what kind of installations are inside the wall or in the roof.

To produce fine fibre wool as a complement to lamb meat production, Merino and Svea sheep are currently being crossbred in the county of Jämtland. The aim of this study was to evaluate growth and wool quality of the first crossbred lambs. In addition, a literature study about nutritional effects on wool production has been carried out. The literature study showed that fine fibre wool should foremost be achieved through directed breeding. Nutritional requirements of the sheep at different stages of production should determine their feeding.

Humans have inhabited mountainous areas in northern Sweden since the end of the last glacial period, ca 8000 B.P., and their presence has marked the landscape in various ways. Older traces include the remains of hearths and dwelling sites, but there are also remains, such as culturally modified trees (CMT's), resulting from more recent activities in forested areas. This study aimed to document how people, both indigenous Sami's and Swedish settlers, have used an area northwest of Ammarnäs in Västerbotten, during the last 300 years, and what traces their activities have left in the area. I used historical records as well as an inventory of CMT's in the area to address this aim. Historical records of Sami activity are meagre, but it is clear that the people of the Ran and Gran Sami villages utilized the area long before 1500 A.D.

This report is the result of a degree project in building engineering, at an advanced level. The project evaluated a building from a technical and historical point of view, and focused on its energy consumption, particularly the energy used for heating. The building in question was a small apartment building in Strömsholm, Sweden. It was made in 1902, from vertical logs, a not so common form of the traditional log house. The goal of the project was to evaluate if the energy consumption could be reduced in accordance with building preservation regulations, that is without damaging any of the building?s cultural or historical values.The building was surveyed with the help of archive and literature studies, interviews and inspections.

Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and utilization rate is calculated.

This essay deals with ruins from the perspective of their cultural values ??and the impact of add-ons, protective add-ons and caring actions affect these values. The issues in the essay are; What are the cultural values of a ruin?  How have ruins been used?  How are ruins treated today?Initially the definition of the concept ?ruin? is discussed, what is a ruin? A building has an architectural biography: the creation, destruction, change and the decay. The concept of ruin is considered to be a state of this decay, rather than a dead building.