The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.

This thesis was rendered for the client HAGS Aneby AB that is a global leader in playground equipment. The goal of this project was to develop a seesaw that is available for children aged 5-12 years; both with and without disabilities. The project has aimed to develop a seesaw that fits everyone in the target group without looking specially adapted.Children with disabilities have difficulty using today's seesaws because they consist of only a seat and a handle on each side. It requires that the user has strong arms and legs and can sit up without support. HAGS Aneby AB would like to change this.To gain knowledge of the target group and on the different types of disabilities information was sought for on the internet including the RBU's and UNICEF's websites.

Rapporten beskriver förslag på framtidens ?Rear Seat Entertainment? som baseras på användning av pekskärm, istället för de DVD-baserade TV-skärmar som finns i t ex Volvo S80 i dagsläget. Projektet utfördes som ett examensarbete inom integrerad produktutveckling vid Högskolan i Skövde. Syftet med arbetet var att hitta lösningar som möjliggör användning av ?touchteknik? som kräver armavstånd till displayen.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

This master thesis is commissioned by Permobil AB. The report describes thoroughly the developing process of an adjustable backrest for wheelchairs. The target group for the backrest are people that suffer from scoliosis or other spinal diseases. Because of insufficient pressure distribution usage of traditional backrests is not an option for them.The current solution has got a frame that is made by several adjustable links that is held in place by friction. Between the links velcro tapes are attached that is adjusts the depth.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

This Master Thesis has been carried out as a new product development project in collaborationwith G-Man Tools AB located in Edsbyn. The purpose of the project was to construct a newpruning saw there the blade is integrateble in the handle, thus a foldable pruning saw.The work has been performed on the occasion of G-Man Tools AB wanted to improve theirproduct range by creating a saw that complement their range of quality saws. They have a similarproduct today, but they do not manufacture this product by them selves and it is not directlytargeted against garden use, which is a disadvantage when it is one of their major markets.Even though almost the entire chain from the requirements of the users to drawings has beentaken into consideration, emphasizes has been put on generating ideas. However the first thingthat was carried out was to establish a productspecifikation from interviews with users and thecompany?s experience.

The freedom of establishment is a fundamental right on the internal market which enables companies to take up and pursue activity in other member states, ?host states?, in a non discriminatory way. In situations where a company wishes to use the right to establish in a host state, complications will be discovered since the member states are applying different principles for deciding the nationality of a company. Since the Treaty of the Function of the European Union recognize both principles, and both of the legal areas company law and European international private law lack harmonization regarding companies wishing to perform such a transaction, the situation today brings the possibility that such a company could be covered by the legal system of several member states, or maybe no legal system at all.The Court of Justice of the European Union has through case law contributed to make the scope of the freedom of establishment a little bit clearer but there are still difficulties regarding situations when a company wishes to transfer its seat to another member state with a change of nationality. Today?s measures, for example the SE-company, is not enough to satisfy the companies wishing to transfer their seat to another member state.

Syftet med det här examensarbetet var att konstruera och formge ett armstöd med integrerad joystick för båtsätet Atlantic Seat. Projektet genomfördes vid Medinova AB som är ett produktutvecklingsföretag med fokus på ergonomi och i första hand arbetar med säten och styrsystem för snabba motorbåtar. Atlantic Seat är ett säte med god stötupptagningsförmåga och har två målgrupper i dels yrkesbåtar såsom Sjöräddningens och Försvarsmaktens båtar, dels lyxiga fritidsbåtar. Under projektet har ett systematiskt tillvägagångssätt använts i arbetet. De moment som genomgicks var informationsinsamling, problemformulering, problemundersökning, idégenerering, idébedömning samt detaljkonstruktion och formgivning.

Syftet med projektet var att ta fram en handbok till företaget SB. Handboken har tagits fram genom att studera och utgå från vad som ingår i Yellow Belt utbildningar som finns tillgängliga på marknaden. Hur de olika verktygen hanteras och mottas på företaget har undersökts genom iterativa tester på medarbetare. En semistrukturerad intervju avslutade datainsamlingen och resulterade i vad som kom att få namnet ? Den lilla verktygslådan?.

This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.

This work of examination describes an environmentally oriented product development aimed to develop new packaging with improved environmental and sale aspects of the products from Primus Sweden AB. The report covers the design process from the first collection of facts to the final results with a description of all methods involved in the work. The focus has been on a clear environmental awareness and the report contains a deepening of the concept life cycle assessment (LCA) for product development. In the process, the consumers? opinions of the brand Primus and environmental profiling formed the basis for the packaging to communicate the right values such as quality, technology, environmental awareness and adventurer?s first choice.The deepening of the life cycle analysis shows that composting and other alternative treatment of the biological cycle is not possible to implement in a satisfactory way in the design process.The work results in two final concepts.

Humans have always been fascinated by the thought of bringing non living objects to life. We wanted to explore the possibilities of trying to create an artefact that the audience would consider possess emotional states and have a life of its own. TaS is a interactive chair that functions as a social entity. The idea is to try and enhance the bond between human and artefact, based upon the emotional connection. We try and produce, enhance and maintain this bond through curiosity based interaction. Bachelor thesis in Interaction Design by Andreas Eriksson, Johanna Lund and Fredrik Lundh, spring term 2008, Malmö University, K3 School of Arts & Communication..

The aim in this project was to spread play in the city and acrossgenerations. My way of approaching this challenge was to explore theborderland between playground equipment and street furniture. Thisopened up many possibilities to afford play in places where playgroundequipment often is excluded.The goal was to create one, or more, furniture with play value. The targetgroup was all vivasious people spending time in the public outdoorspace. Through user studies, a lot of serious playing and a lot of testing,the project resulted in a bench called Rollin´.