Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

The following report is based on the graduate job course in CAD technician program year two. The work reflected in the report is done in collaboration with Hans-Erik Eldemark. This work includes the development of a progress bar for dishwashers.The execution of the thesis has involved a list of criteria with conditions and requirements, which after where weighted in a matrix. Subsequently, the product proposal was developed and has been divided into three categories, twist mechanisms, attachments and exterior design. Finally, suggestions have been designed in CATIA V5 and prototypes were produced using 3d-printing.

The thesis analyzes two different approaches towards responsive web design, Mobile-first and Desktop-first. Responsive web design is a concept for websites whose design is customised based on the screen size. The analysis is performed by collecting views on the methods and also analyzing the usage of mobile and desktop internet to create a prototype of a responsive website where both methods are beeing used.The main difference between the methods is the foundation, where one is designed for mobile and the other for desktop. The thesis indicates that Mobilef-irst gives a better result for the mobile, which unlike the computer has poor performance, smaller screen and poor internet connection, therefore an advantage for the device that needs more focus to maintain a fast response. Desktop-first does not take this opportunity, but focus instead on the computer where the performance is better, which leads to a unnoticeable difference in response time.

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

I det här examensarbetet undersöks möjligheterna med framtida storskaliga 3D-skrivare i byggindustrin. Mycket händer just nu på området och vi är på väg mot en ny revolution i byggnadskonsten där robotarna och 3D-skrivarna kommer att ha en allt mer betydande roll. Arbetet undersöker i detalj hur vi skulle kunna använda oss av tekniken. En villa har fått stå modell för olika typer av experiment och redovisar olika tankar och idéer kring ämnet..

Regelbunden fysisk aktivitet motverkar en rad fysiska och mentala sjukdomar. Hälsovinster av fysisk aktivitet är bland annat en högre funktionell muskulär- och kardiovaskulär kapacitet samt en högre livskvalitet. Stillasittande och inaktivitet kan leda till övervikt, kardiovaskulära sjukdomar, cancer, psykosociala problem och metaboliska sjukdomar.Mellan män och kvinnor finns fysiologiska skillnader som visar sig i kroppsstorlek och muskelmassa. Detta ger generellt sett kvinnor mer flexibel fysik medan män är fysiskt starkare.WHOs rekommendationer om daglig fysisk aktivitet är 150 min/vecka av moderat aerobisk träning eller 75 min mer ansträngande aerobisk träning. Styrketräning som involverar större muskelgrupper rekommenderas i åldrarna 18-64.

Projekt av ett förslag på Operahus vid Stadsgårdskajen i Stockholm med nischning mot ljus- och videoinstallationer. Den publika ytan framför byggnaden integreras med de administrativa aktiviteterna i Operahuset i ett programmerbart landskap..

AbstractThe purpose of this study is to examine how children interact with each other and what social positions they assume when using the learning pad. The social positions reffered to is the Owner, the Participant and the Spectator, defined by Ljung Djärf (2004). According to Ljung Djärf (2004), the Owner is defined as the one in control of the mouse and keyboard. The Owner is expected to be in charge of what is happening on the screen. The Participant is typically found on a chair near the computer.

The viscosity of air buildings is a hot topic within the construction performers, which the industry feel they have too little knowledge about. This study is mainly aimed against air density in apartment buildings and airflow measurement. The study consists of a theoretical reference, educational visit, interviews and a survey conducted among construction workers at Magistratshagen in Linkoping.Earlier requirement in terms of air leakage through the climate screen was removed and today there are only energy requirement for a dwelling in Boverkets Building Regulations. The difference between a passive and a typical air tight construction is that the passive house have a maximum requirement of 0.3 l /s m2 of air leakage through the building climate screen. The requirement imposed on passive houses is to minimize the supply of power and energy for heating the building.Air tight constructions have heavy demands on the performance and accuracy of everyone involved with the project. The client must specify their requirements and also be prepared to pay for any additional costs. The architect and building planners have to design the building with regard to air tightness. Finally, the construction workers are required to do a careful work in order to get all the connections in the building air tight.The study suggests that an air tight building is a closed system where no forced ventilation exists. There are no reasons not to build too tight as long as there is a functioning ventilation. In this study the authors ask themselves how an air tight building changes over time. No theoretical information has been found on these changes, but the respondents assume that air density decreases with time. The deterioration is mainly assumed to be caused by construction materials changes over time. The study shows that construction workers knowledge of air tight construction is mixed, which they themselves admit in the survey..

We are getting smarter. Our knowledge of the world around us is increasing rapidly and our population spend a big portion of their time in school studying it. But art and craft are moving out to give room for more theoretical subjects. Today many of us can not even fix a torn shirt without help. We buy new ones, they are cheap enough.

The aim of our study is to ascertain whether a hanging suspension fluorescentlamp for a private home environment is going to be attractive for a largeaudience. We want to open up for new uses of fluorescent lamps as lightsources.The main approach in this work is how to design a fixture with fluorescentlamps as a light source that will meet the requirements and requests of thehome environment could look like. At the same time we want to make a newimpression of how a fluorescent light source.Primarily we used a quantitative method, but this was rejected after a pilotstudy. Instead we used a qualitatively based method in the sense that weconducted a group interview as well as individual interviews.Based on data from the interviews and our preliminary work a prototype wasbuilt. This prototype is a fluorescent fixture equipped with 2x14W T5fluorescent lamps, dimmed separately.

The objective of this thesis has been to investigate the approval process for an image. This investigation has been carriedout at four catalog-producing companies and three companies working with repro or printing. The information wasgathered through interviews and surveys and later used for evaluation. The result of the evaluation has shown that allbusinesses are very good at technical aspects but also that the biggest problem they have is with the communication. Theconclusion is that businesses need a clear construction for the image process.

The aim of this research is to examine the Göteborg International Film Festival Fund (GIFFF, 1998?2011) as a part of the festival's overall operations, to provide answers to questions about if/how the Fund can be understood as an expression of the festival's fundamental values, and how the Fund can be recognized within the festival's strategic development. The GIFFF is also discussed in relation to contemporary academic studies that interpret Western film funds for the developing countries ? such as Hubert Bals Fund and Fond Sud Cinéma ? as an expression of Eurocentrism.The investigation is based on the contemporary film festival research, previous academic studies on Göteborg International Film Festival, the festival?s printed material ? such as programs and press releases ? as well as interviews with the former festival director Gunnar Bergdahl, who initiated the Fund, and festival editor Ulf Sigvardson, who ran the Fund during its final years of existence.The conclusions are: The Fund's objectives ? such as to support filmmakers and film schools in the developing countries, and also to screen their films at the festival ? can be seen as a broader interpretation of the vision that was determined by the festival founders, that the festival should be a platform for independent filmmaking and also help screen the films that otherwise would not reach the Swedish audience. Also, the Fund was a significant part of the festival's expansion strategies during the 1990s.

Abraham is the original patriarch. How does his leadership compare with a modern day popular culture patriarch with his roots in advertising, the shopkeeper Stig, star of the ICA advertising? The essay compares the leadership and masculinity of two male leaders from different backgrounds and settings, and discusses similiarities and differences.

The occurrence of small amounts of albumin in urine, microalbuminuria (MA), is used both in human- and veterinary medicine as an indicator for patients who have developing proteinuria. Proteinuria can be prerenal, renal or postrenal which is important to establish during an investigation. With conventional methods decreased renal function is not detected until 70 % of renal function is lost. The ability to detect and start a treatment earlier might reverse or slow the progression of disease. The purpose of this study was to investigate the reliability of Heska® E.R.D.-Health Screen?, a test for microalbuminuria in dogs, to detect albuminuria.