Recent years have been very turbulent for most private equity firms. Especially the financial meltdown in global economy has affected the industry, but also the public pressure has made private equity houses change their control strategies towards more conventional methods used in public companies. This thesis aims to put light on the control methods used in listed private equity houses which use a buyout strategy. The paper describes how the control methods change over the different phases the asset experience and how different value generating strategies use altered control methods. Using Merchant's (2003) framework for management control systems and Berg and Gottschalg's (2004) research on value generating strategies in buyouts the thesis shows that action controls as designing instructions for the board and a business plan, together with goal alignment is the commonly used control strategy directly after the acquisition.

The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.

The purpose of this study is to gauge the current state of Swedish library and information science research. LIS is generally defined as a cross- or multidisciplinary subject, according to some coupled with heterogenity or dichotomy within the subject. In light of Jack Meadows?s description of the scientific community growth and scientific communication, the following two research questions are formulated as basis for the study: 1. What are the current themes, what range of theories and methods are used in our research material? 2.

By studying the forms of work and methods teachers choose for their teaching on the Business and Administration Programme and by examining the experiences gained by these teachers, I hope to gain a clearer insight into how the demands of national policy/governing documents are met in the actual teaching of the courses within the programme. In my qualitative study,teachers in a team from a Business and Administrative Programme have been my informants. The team combines multiple forms of work and methods in line with the intentions of the national policy/governing documents. Students usually have an unbroken school day with block teaching where they work with case studies and interdisciplinary  work. Morals and ethics are integrated in class.

This paper aims to investigate whether a small organization with small development teams can find a value in leaving a functioning development process to follow a formal systems development methodology, if these organizations can find support in an agile systems development method and in such case the method needs to be adjusted according to the organizations unique conditions.A traditional plan-driven system development methodology includes a number of phases that are carried out sequentially and a completed phase can basically not be resumed. All requirements are specified at the beginning of a project and at the end of the project only one delivery of software take place. This can cause difficulties in for example dealing with changing requirements. Agile system development methods intend to deal with changing requirements and to enable continuous delivery of valuable, working software.In this paper, both the traditional plan-driven methods and agile methods will be explained. Research methodology and existing system development theories will be discussed and a company where the study has been conducted will be presented.

This is a qualitative study with four interviews, in four different preschools, in the same municipality. By making it so, it becomes a case study to describe a phenomenon in a municipality which also is the definition for this investigation. The purpose of my study is to examine what it means, in a municipality, to have different types of introduction at preschool. Where I ask the question why preschools choose to have a specific method of introduction and what are the basics and ideas behind the choice of the method? What significance do these different methods have to attachment theory? What do teachers think about the advantages and disadvantages with their choice of method?The versions of introductions are many and may vary; the duration of the introduction may vary from 1-3 days up to 3 weeks.

The student project Elba at KTH started in 2011 and is a project where a battery driven prototype car is developed. The vehicle competes in Eco Shell Marathon in Rotterdam, Holland. In this competition the vehicle that travels a certain distance including several starts and stops with the lowest energy consumption wins. To minimize the consumption is therefore very important, which requires knowledge of the vehicles energy losses.A vehicle's energy losses depends on several factors and can be divided into the powertrain efficiency and the driving resistance. The driving resistance can then be divided in to rolling and air resistance, if smaller losses like vibrations are ignored.

How do the police prevention methods work against juvenile delinquency? The purpose of this study is to see how the police work to prevent juvenile delinquency in two municipalities in Stockholm, Södertälje and Sundbyberg. Additionally, the purpose of this study is also to find out if there are any similarities or differences between the police methods the police use in these two municipalities. We have used qualitative method in which we have interviewed the police and young people from the communities. We interviewed young people to see their attitudes to the police and the area to find their perception of police work in the fields as well as the police forces attitude toward the young people.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high moisture content in the waste.

Prioritisation of software requirements is a critical part of the development of software. Whichrequirements and in which order they will be developed is one of the main tasks that requirementprioritisation supports.There are different ways that a requirement prioritisation can be used, for example alone or in agroup and with different methods.The purpose of this report is to map out how you can carry out a requirement prioritisation alonewith different types of prioritisation methods and how you solve the problems that can arise whenprioritisting requirements. This is done by documenting the use of three different types of methodsthat can be execute alone. The methods are "100-dollar test", "Ranking" and "Top-tenrequirements".To be able to prioritise requirements, you need to establish which requirements you shall prioritise.The paper retrieves this information by interviewing stakeholders in the system and analysing theresult of the interviews and the execution of the requirement prioritisation.Three problems arose during that work and I present solutions on these problems. The problemswere 1) equivalent requirements when using the "100-dollar test", 2) low differentiation gradebetween the prioritised requirements in the "100-dollar test" and 3) that the requirements that wereprioritised weren't classified before the prioritisation, which leads to inaccuracies in the resultingprioritisation.The solution to the problems that the paper presents is to increase the amount of distributable unitsin the "100-dollar test" to 1000 per requirement, suggestions of classes of the requirements andthe combination of the methods "100-dollar test" and "ranking" to bypass the equivalentrequirements.The report is written in Swedish.Nyckelord: GoTRIS, requirements retrieval, requirements analysis, Viktoria Swedish ICT,requirements prioritisation, requirements, 100-dollar test, ranking, top 10 requirements..

Skin temperature is detected through signals in unmyelinated C-fibers and thin myelinated A?-fibers in the peripheral and central nervous system. Disorders in thin nerve fibres are important and not rare but difficult to diagnose by the most common neurophysiological methods. In this pilot study different methods for quantitative sensory testing, QST, were compared to give some ideas about which method could be the most efficient to use in order to point out injuries of the sensory system in clinical practice. The comparison was made between Békésy (separate warmand cold thresholds) and Marstock test (combined warm and cold thresholds).

Amongst the published literature researching wet cleaning of paper there is a limited amount of studies conducted researching the method simmering water treatment. There are even less studies conducted on how simmering water affects the paper being treated when used as a cleaning method. Despite the limited research, there are literary reviews describing the method and suggesting it as an alternative for conservation of paper with iron-gall ink. The following study will therefore be examining, the somewhat unusual method, simmering water treatment, and comparing it to one of the more common wet cleaning methods: immersion washing. This is done to compare how the different temperatures of the water affect the paper. The types of paper used in this study consists of three dyed and four undyed papers. All of the papers are new, apart from one sample originating from 1847.

ABSTRACTMany wind turbines have problems with icing and there is still no effective method to de-ice without stoppage of production and power loss. Here I therefore consider other methods than those available today, and particularly, I consider how these methods could be applied to wind turbines of the company Oxel. A surface where the water droplets do not attach might be the basis for a useful method. If no water attaches, no ice could form. To accomplish this a hydrophobic surface is nessesary, for example wax.

The point of the study is to investigate educational and vocational counselors' strategies on drop in calls. In order to answer the purpose, the issues concerning the educational and vocational counselors' strategies and guidance models/methods at drop-in calls investigated.Qualitative interviews were conducted with six educational and vocational counselors'.In the study it appears that the educational and vocational counselors' are unable to have any strategies for drop-in conversation because the applicant will come spontaneously and the educational and vocational counselors' lack information about the individual and its purpose of the interview. Guidance models/methods designed to facilitate for the applicant and give them a sense of understanding about them selves there environment and results in a clarification of the election, not often used during the drop-in calls.These are not often used due to the lack of time because the intention of the call is to provide with information to the applicant in as little time as possible. In an educational and vocational counselors? perspective the guidance that is offered at drop-in calls defective..

Abstract (in English)The task for the diploma work was to develop methods for measuring of moisture content by the Karl Fischer method, in jam, jelly sweets, and fudge.The start premises was a for the company whole new equipment, which should be started up. Then programs should be developed for different kind of samples.In the task it was as well included to develop methods for dissolving the different kind of samples, since the Karl Fischer method demands completely dissolved sample material..