The ability for companies to anticipate the future and stay in the forefront of the competition is essential for successful business. The tool of Environmental Scanning is basics in the process of developing prescriptive strategies as well as vital in evolving emergent strategies. The complexity lies in gathering relevant information and transforming the information into adequate data, which can be utilised by management to optimise strategies. The purpose of this study is to scrutinise how successfully operating Swedish manufacturing companies, listed on the Stockholm Stock Exchange?s ?Large Cap?-list, organise their Environmental Scanning actions and how this affects the development of strategies. Prior research on the subject has been used as foundation to presenting relevant theories.

Scanning är ett verktyg som har utvecklats mycket och används mer och mer inom geodetisk mätning. Instrumenten har blivit mer pålitliga med högre kvalité på resultaten, därför är det viktigt att eliminera de problem som kan skada Scanningens pålitlighet. Det problemet som ska undersökas och testas i det här examensarbetet uppstår när man till exempel scannar en bergvägg. Man vill få en så lik avbildning av bergväggen som möjligt för att sedan kunna göra volymberäkningar emot bergväggen. Avbildningen av bergväggen består av ett moln av punkter som tillsammans skapar en 3D-modell av bergväggen. Om det ska fyllas med betong emot bergväggen så måste man veta vilken volym betong det kommer gå åt, därför är det viktigt att modellen av bergväggen stämmer.

The purpose of this study is to provide a longitudinal examination, within grocery retailing, of four marketing tools and their impact on enhancing customer loyalty. The study examines whether the relationship between the four marketing tools and customer satisfaction has a positive effect on attitude and behavior loyalty. The findings from this study show that the marketing tools have not helped enhancing loyalty between 2004 and 2007. Between these years, service quality has the most affect on loyalty. Self-Scanning as an effective marketing tool could be questioned, the relation in this study is not supported.

In today?s society, people often find themselves in situations where they need to be identified;for example when we buy alcohol, need to use an ATM or log on to our e-mail account. The most common methods today that are used for these kinds of matters are antiquated, and inthe meantime, criminals all over the world get more sophisticated. Companies invest billions every day in order to protect their interests. Maybe it?s time that we finally give biometrics theattention that it deserves.This essay aims to describe the biometric methods that are available today, find some of the most effective when it comes to physical access and make a comparison.

Data retrieved from airborne laser Scanning represents a new source of forest data. Today, the technology has matured so that it can function in an operational environment. The aim of this study was to compile areas of application of laserdata in forestry. Moreover to analyze costs and accessibility of laserdata. The goal was to provide private forest owners information to support assessments of possible benefits of laserdata.

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.

SjälvScanning introducerades i butiker för ett antal år sedan och finns nu i butiker som Ica Maxi och Coop Forum. Investeringskostnaden för ett sådant system är dock hög och butiker med lägre omsättning har därmed inte råd att köpa in detta system. Detta projekt syftade till att utveckla ett alternativ, med en applikation till Android för Scanning. Tanken var att kunderna då kan använda sina mobiltelefoner som scannrar vilket skulle minska investeringskostnaden för butikerna.Genom att studera existerande system, togs en lösning bestående av två delar fram, dels applikationen men även en server med en databas för lagring av kundernas varukorgar. För testning av lösningen utvecklades även en testmiljö bestående av en prisdatabas och en kassa i form av ett datorprogram.

At present day there are several different methods for measuring of paved surfaces.The most common methods today are measuring with a total station, the GlobalNavigation Satellite System (GNSS) and terrestrial laser Scanning (TLS). Recently thedevelopment of unmanned aerial vehicles, known as drones, has increasedexponentially and today there are several ways of using drones for measuring surfacesby photographing and laser Scanning.This thesis contains a comparison between the methods terrestrial laser Scanning(TLS), and unmanned aerial vehicle photogrammetry (UAV). The measurements havebeen applied on two different test surfaces, one of asphalt and one of gravel. Thepurpose of the comparison is to investigate whether the airborne photogrammetry isequivalent accurate in its height levels as the terrestrial laser Scanning. For thecomparison to be more extensive, these two methods have not only been comparedin precision but also in the areas of ease of use and economy.The precision was analyzed by comparing the height levels in randomly placed controlpoints on the test surfaces.

Introduktion: Dental erosion definieras som förlust av tandens hårdvävnad genom en kemisk process som inte involverar bakterier. Dagens förändrade livsstil och kosthållning medför att våra tänder oftare utsätts för kemisk påverkan som kan leda till erosion. Det är flera faktorer som samverkar och dental erosion har en multifaktoriell etiologi.Syfte: Syftet är att beskriva olika registreringsmetoder för dental erosion.Frågeställningar: Vilka metoder kan användas för registrering av initial erosion? Vilka metoder kan användas för registrering av avancerad erosionsskada? Vilka metoder är kliniskt beprövade på patient?Metod: LitteraturstudieResultat: Ett flertal registreringsmetoder fanns beskrivna i litteraturen, merparten var inte applicerbara kliniskt. Registeringsmetoderna som framgick i den beskrivande litteraturstudien var: 3D Scanning microscope (IFM), Atomic absorption spectroscopy (AAS), Digital photography (DP), Focus-variation 3D microscopy (FVM), Longitudinal microradiography (LMR), Non-contact confocal laser Scanning microscopy (CLSM), Optical assessment, Optical profilometry (OP), Quantitative light-induced fluorescence (QLF), Scanning electron microscopy (SEM), Stylus profilometry (SP), Ultrasound, White light interferometry (WLI) och X-ray diffraction (XRD).Konklusion: Vid registrering av initial erosion krävs analys av tandytans mineralinnehåll samt optiska analyser med hjälp av instrument.

This reports purpose is to give a general view on how to handle information collectedthrough photogrammetry and laser Scanning with the help of UAS. The report ismade in collaboration with WSP Group and will briefly describe howphotogrammetry and laser Scanning, also known as Lidar, works and how those areused in the construction business today. Then the focus will be on how gathered datais handled today, how outsourcing of data should be approached and if there are anyconsequences if data is handled in the wrong way. Interviews have been made with allparts in the UAS business. That includes authorities as Transporstyrelsen,Försvarsmakten.

Bakgrunden till detta examensarbete var att Qumex Materialteknik vid ett flertal tillfällen konstaterat att material av typen SS 0725 har uppvisat bristfälliga härdresultat. Materialet, som är relativt nytt på marknaden, är ett gjutjärn av typen segjärn och utmärker sig gentemot andra segjärn på grund av sitt höga innehåll av kisel. Då segjärn enligt den nu gällande EN-standarden klassificeras efter sina mekaniska egenskaper uppstår ett problem gällande SS 0725. Materialet uppfyller de krav som är ställda för EN-GJS-500-7 och hamnar därmed under samma materialbeteckning som ett segjärn med betydligt lägre kiselhalt. Att två material med olika kemisk sammansättning hamnar under samma beteckning kan innebära problem.

This master thesis includes a description of how a number of sensors are put together in a sensor platform. It also gives a description of how localization and mapping has been performed with data collected from the sensor platform. Localization is a prerequisite for most of the tasks that can be requested from an autonomous mobile robot. In many situations the GPS signal is not available and hence an additional localization system is required. One approach is to apply localization based on landmarks extracted from the robots surrounding.

To make it easier for forestry planning the forest owners needs data which describe characteristics of the forest. Such data you usually get from some type of inventory. A relatively new technology which probably is getting more important in the future, is laser Scanning because of lower costs. But because the laser technology is relatively new you need to compare it with conventional inventory technologies to get better understanding of the possibilities the laser technology gives. This work intends to estimate field measured characteristics of the forest from laser data with help of regression analysis and then see which of the field measured properties that best could be estimated and which laser variables that gave the best results. This study shows that heights has the best estimates, but biomass, diameter and volume also gives good estimates.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2015:09.

The purpose of this study was to investigate produced laser data from the new national height model's airborne laser Scanning in Sweden, what quality it has and whether it can be used for forest management planning. From airborne laser Scanning one can obtain information on forest variables such as tree species, height, diameter and basal area. Norra skogsägarna is the principal employer of this project and they wanted know to the quality of the laser data which needs to cope with their standards. If the laser data the quality required it can replace some of the operations performed by field planners. To examine the quality of the produced laser data a control tax assessment has been performed in 30 forest departments. This was done in an objective manner.