This final year project is dedicated to investigate the problem domain of system maintenance management. The purpose is to find problems in the system maintenance management of today. Whether there is any problem that can be elicitated in the requirements engineering?s phase that could help to obtain more maintenance management friendly systems and if it is not possible to obtain more maintenance management friendly, what else can be done?It has been learned that there are many problems today in the problem domain and the most great ones are the system documentation, stress and a systemknowledge lack among developers, system managers and system users.The requirements that have been found for this problem is good documentation, and use of simple solutions in the creating of the system..

The purpose with this article is to give examples how to remain and in a long run develop a higher interest in maintenance activities and knowledge. First reason is the changed age-distribution with more number of older employees among maintenance personnel staff and second reason is demand for education due the increasing demand in environmental responsibility.In spite of there is a lot of knowledge of maintenance in national organizations of interests it will not be used in a sufficient extent in many companies. This knowledge is an important base to use to re-built the missing or loosed skills in companies. The national organization UTEK is involved in European projects to validate knowledge of maintenance. Lost of or bad maintenance activities will always affect on the environment.Establish a network between companies is a good way to exchange information in their common business areas.

In this report a systematic working procedure for risk classification of processing equipment from a maintenance point of view is described. How this system has been worked out is also an important part of the report. The classification system is adapted for use in complex processing plants. Preemraff Göteborg has been subject for the underlying study and application of the system.The system aims to give a good overview of the maintenance related risks at the plant. Furthermore, the analysis result is a good motivation for the suggested maintenance activities and as motivation for extended or decreased maintenance resources in total.

Costs of maintenance on combines are a subject of interest thus it constitute a large investment and cost for the individual farmer. Therefore it is important to have up to date knowledge and the right facts to be able to do reliable calculations on one of the largest investments for a farmer. The aim of this study was to compare costs of maintenance on combine/threshingmachine with the computer program for advising environmental issues in agriculture, STANK. Interviews took place and data were collected by handing out questionnaires to 20 farmers. A similar study conducted by Neuman (2003) investigated costs of maintenance and compared these with STANK. The results of this study have also been compared and examined related to data from SLA - Skogs och Lantarbetsgivarförbundet. The result shows that 18 out of 20 combines were given a higher cost of maintenance when using STANK compared to the numbers in this study.

För- och nackdelar med belöningssystem - en studie om ScaniaVårt syfte är att beskriva hur ett belöningssystem kan vara uppbyggt och studera vilka för- och nackdelar ett belöningssystem medför. Vi studerar närmare hur Scanias belöningssystem ser ut och hur väl det fungerar som en motivationsfaktor för de anställda. Vi vill också undersöka om det finns något som kan förbättras med Scanias belöningssystemVi använde en kvalitativ metod. Utifrån litteraturstudier skapades en referensram. Därefter intervjuade vi sex personer på Scania om deras belöningssystem.

Today, maintenance is a big part of the daily life on board ships. It is also one of the bigger expenses a shipping company has and without any loss of quality tries to run as economically advantageous as possible. In the hunt for economical savings the shore-based industry has subsequently applied the use of condition based maintenance, CBM, were a component is maintained according to its actual state. This leads to a reduction of maintenance costs since no parts are unnecessarily replaced. However, within the maritime sector a periodical maintenance is still the most commonly used maintenance system.The purpose of this paper is to chart the factors that are the reason for the low implementation of CBM on board the Swedish merchant fleet's ships.

This diploma work handles how some parishes of the Swedish Church administrate their building properties.The report also includes how some external property managers in Sweden work with maintenance plans and other maintenance issues. Further, a number of deficiencies have been identified and suggestions to workarounds are treated. The conclusions drawn in this thesis are based on the author´s experience in the field, performed interviews, and literature studies. The result of the work shows a general lack of knowledge in many parishes what concerns regulatory requirements, properties with no maintenance plan and substandard supervision resulting in unnecessary and expensive repairs. Based on these results, different plans for the maintenance of the building properties of the Swedish Church has been proposed..

The economic crisis has affected the airline industry as much as it has affected all other industries in the world. The small airlines and maintenance organisations must find new opportunities and options in order to survive the harsh crisis. Priority Aero Maintenance is now an approved maintenance organisation performing maintenance on aircrafts, engines and components. The company sees economic gains in the future by becoming an approved organisation that follows the European Aviation Safety Agency guidelines (EASA) and meets the requirements outlined in the rules of Part-M.In order for the company to become an approved organization, responsible for continuing airworthiness of aircraft, a handbook should be presented to the local authority. This handbook describes the company?s responsibility for the continuing airworthiness in order for the authorities to get an insight into the company and its work.This thesis resulted in a draft of CAME (Continuing Airworthiness Management Exposition) and this draft has been approved by Priority Aero Maintenance.The CAME will in the future be used by the company as a basis for developing a more detailed manual to be presented to and approved by the Swedish Aviation Authority (Transportstyrelsen)..

AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).

Scania?s discount rate - the return requirement of investments - refers to Scania?s WACC or weighted average cost of capital. The capital markets return requirement on equity and the credit market interest cost of borrowing is weighted to become the single discount rate, the WACC. The purpose of this study is to investigate which asset pricing model of APT and CAPM Scania should use in their WACC calculations. The company now uses a group WACC of 11 percent which is used in all company levels.

Intranät har blivit ett vanligt verktyg för informationshantering inom företag. Under 2003 övergick Scania från sitt gamla intranät till det nya, förbättrade intranätet Scania InLine. Intranätet har nu uppnått en mognadsgrad som gör det möjligt att se över vilken information som saknas eller är svårhittad.Uppgiften var att genom en kvantitativ studie (analys av intranätets söklogg) och en kvalitativ studie (intervjuer med användare) identifiera vilken information som användarna av Scania InLine förväntar sig ska finnas där, men som de av någon orsak inte lyckas hitta, samt att genom detta arbete visa på en metod som kan användas vid liknande undersökningar av saknad eller svårhittad information på intranät. Slutsatsen blev att det inte är så mycket information som verkligen saknas på Scania InLine. Problemet är snarare att informationen är svår att hitta.Examensarbetets resultat består av en redogörelse för hur det analyserade materialet sammanställdes samt förslag på förbättringar för intranätet Scania InLine.

Presently Sjöfartsverket do their maintenance according to a standard program, which means that every maintenance task will be done when the task limit occurs. This leads to a very long downtime for the aircraft in some occasions and very short downtime in others. The goal with this work is to reach a higher regularity of the aircraft operation. To reach a higher regularity for the operational needs, this work will present a hypothetic better maintenance concept for Swedish Maritime Administration. The concept is based on equalized maintenance structure, which means that every maintenance occasions are meant to take the same time to perform.

This essay is a case study that deals with the integration of Scania into Sweden,which started for over 300 years ago. The purpose is to capture why theintegration of Scania succeeded, what were the main reasons or factors and todiscuss the effects the scanian identity and culture had on the integration. This hasbeen done with the help of different theories that will help sort out main factors tothe successful integration. The result of the study revealed a number of factors, tobegin with the scanian identity appeared not to be such a great obstacle for theintegration that one could believe. The identity developed because of the?swedification?, which were the measures the Swedish government took tointegrate the new territory.

AbstractThe aim of this examination paper is to get an overview on the ?no-maintenance? windowsthat exist on the Swedish market, like plastic and aluminium windows.By way of introduction the reader gets knowledge in the background and problemformulatethat this subject has. This introduction explains why it has become so popular to changeyour windows into plastic- and aluminium windows and there is an existing scepticismagainst PVC and aluminium as construction material for windows.The main part of this report is constructed by segments of interviews where bothproducers of windows and stakeholders gets to answer questions about their viewing onno-maintenance windows from a material and construction point of view and where theproduction is headed to in the future. This is followed by an evaluation of a questionnaireon how pleased the house owners that changed their old windows to no-maintenancewindows are, followed by an inspection of windows made up from wood and an aluminiumclothing, windows made from only aluminium and PVC-based windows. It ends with atheory part about the materials PVC and metal based upon facts included in literature.By reading this report you can draw the conclusion that no window can be entirely nonmaintenancebut that the materials PVC and aluminium still are good substitutes for woodto lessen the maintenance..

One of the most distinguishing features for companies today is that they must have a close collaboration and keep up a good relationship with their suppliers. This is important for the companies chance of survival and for them to compete in their markets. This essay will discuss the subject of Scania?s long-term collaboration with their suppliers. The purpose of the essay in this case study is to analyze if a long-term cooperation with a supplier is of essence upon renegotiations of continued collaboration.