Förslag på hur Arkitekturskolan kan ritas och programmeras om för att bli en offentlig byggnad i staden som ger mycket tillbaka till Stockholms invånare. Form och program är utformat att ge alla som befinner sig i och utanför byggnaden en ny syn på staden där inte bara gatuplan är offentligt och takplan är privat. Runt byggnaden slingras sig en offentlig promenad som leder upp till det öppna takplanet med bra utsikt över staden. Byggnaden har delats upp för att skapa torg på plan 2. GA är en offentlig plats likt en galleria 2.0..

In the EU there are EC Directives that Member States of EU should follow. Sweden has undertaken to transpose EC Directives regarding the working environment to Swedish Provisions.  In 4 April 2006, the European Commission had some criticism against the Swedish implementation of the Construction Sites Directive. The Swedish Work Environment Authority has in response to this criticism reworked the Work Environment Act and related provision about building and civil engineering work. The changes came into force 1 January 2009.These changes have resulted in some working methods and even new responsibility subjects must be reviewed. The purpose of this exam project was to investigate if contractors and clients in the construction sector, had have time to update themselves on this front and adapt to these changes.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

Den här rapporten har som syfte att utreda vilket eldistributionssystem för offshoreenheter som sparar mest vikt och utrymme. De två elsystem som jämförs är GVAs standard system och Siemens Blue Drive System. Rapporten innehåller en teoretisk bakgrund för båda systemen och dimensionering av systemens kraftkablar samt beräkning av kabelvikter och komponentvikten för systemen. För att uppskatta kabel- rutter och längder kommer ritningsunderlag för GVAs offshoreenhet 7500 att användas.Resultatet visar att GVAs standard system är det eldistributionssystem som har den lägsta totalvikten med 168 ton, GVAs standard system har en vikt som är 101 ton lägre än Siemens Blue Drive System som har en vikt på är 269 ton. GVAs standard system har en lägre ström vilket gör att ledararean blir mindre och i med det blir kabelvikten mindre.

IT - systemen har blivit en del i samhället. IT -system används inom olika områden och verksamheter i och med detta så har användbarhets faktorer i IT -system blivit sådan som inte går att bortse ifrån. Det finns många användbarhetsfaktorer som alla skiljer sig mer eller mindre åt. Gemensamt för dem alla är att ett system bör innehålla visa kriterier för användbarhet för att godkännas av användaren då de använder sig av ett IT -system.Det finns en vilja att skapa användbara system för att underlätta för användaren. Visa faktorer i användbarhet i ett IT -system är genom tänkta medan andra behöver förbättras för att anpassa till beslutfattande och ta hänsyn arbetsmiljöaspekter.

This examination work aims to describe how a supply chain around the biggest pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the pellets factory.

Värnamo Elnät owns and operates a ripple control system which is used to control loadsespecially when the grid is heavily loaded and for control of street lighting. This report aims atclarifying technical and economic aspects of the ripple control system?s future. The system wasinstalled from 1975 and onwards and its use was greater in those days when the controllableloads where greater then today, the current controllable load level is about 3 MW. The reporthighlights three different aspects of the ripple control system?s future ? retain the currentsystem, reinvest in a newer system or discontinue the system.In the report the author also discusses relevant connections to Smart Grids and future meteringsystems and tariffs.

The management of information is a significant competitiveness in companies. Companies stored and save information every day, and it is very common to save de information in different sources. This makes de management of information complex. To mange, monitor and analyze the information, companies can use a system called Business Intelligence. BI system is an analytical system that extracts and converts data into useful information that helps employees to make informed decisions.

Background: The standard of living should be the same for everyone, whether the apartment is placed in an old or new building. The residential properties that were built from 1965 until 1974 is now beginning to become old and in need of restoration. The financial crisis during the nineties contributed to the lack of maintenance on the buildings in Sweden. As the public buildings gets older more and more defects occurs. The coordination and maintenance will therefore have a more significant role in the housing company ?s work.The increasing interest about how old a building can be, attract much attention.

SAPA´s resource of waste heat is the basis for this thesis to investigate the possibility of energy assets in their cooling water and possible uses for it. The energy in the waste water is greater than the current need which has three uses which are (1) heating the factory, (2) converting liquid propane to propane gas and (3) local domestic heating. The average energy load that is available is 1, 7 MW and the average temperature in the cooling water is 41°C. The total energy load at dimensioning out side temperature is approximately 1,6 MW for the three current uses. The temperature is currently too low to be used directly in the existing systems so an upgrade is needed.

There are problems with poor quality, poor scheduling and poor working climate in the Swedish construction industry. Many parts have been involved, trying to solve the problem.This spring a new planning and building-law becomes final. In this law, the requirements set on the controls are greater. Hopefully this will lead to fewer construction errors. The requirements set on the working environment have also increased, forcing consultants and contractors to focus on safe workplaces.For each project requiring a building permit, an inspection plan has to been drawn.

This report is an examination paper in computer science at University of Växjö. The report will focus on the possibility to create adaptable systems and to cost calculate the work needed to modify a system to meet new demands. A project [demos] developed by Interactive Institute studio [12-21] in Växjö is the starting point in our work. They have during a period of two years developed a prototype of a system which intends to get youth and democratic selected representatives a communication platform where they may communicate with SMS. Today they are in a position when they want to develop the system for other user groups with slighter different purpose and to do that they need a more flexible system.

Den här rapporten har som syfte att utreda vilket eldistributionssystem för offshoreenheter som sparar mest vikt och utrymme. De två elsystem som jämförs är GVAs standard system och Siemens Blue Drive System. Rapporten innehåller en teoretisk bakgrund för båda systemen och dimensionering av systemens kraftkablar samt beräkning av kabelvikter och komponentvikten för systemen. För att uppskatta kabel- rutter och längder kommer ritningsunderlag för GVAs offshoreenhet 7500 att användas.Resultatet visar att GVAs standard system är det eldistributionssystem som har den lägsta totalvikten med 168 ton, GVAs standard system har en vikt som är 101 ton lägre än Siemens Blue Drive System som har en vikt på är 269 ton. GVAs standard system har en lägre ström vilket gör att ledararean blir mindre och i med det blir kabelvikten mindre.

Building with volume element is relatively new and has started to increase more and more. The regulations that exist to regulate and determine how the transports of volume elements are to be conducted are diffuse and not very well adjusted to address the issues with transporting volume elements. Today there are a number of instances that a company has to turn to in order to get a somewhat different view, what regulations say and interpret it in order to know what applies and not applies regarding the transportation of volume elements. regulations. The rules that are in place make it tough for the volume element producing companies to develop and continue to be active on the market.

European Union has made a new decision that all new built houses by 2020 shallbe near-zero energy houses. Boverket?s definition of near-zero energy housesintends buildings with good energy performance in which a proportion of theamount of energy that must be added to the building is made of renewable energy.Passive House is a set of requirements from FEBY designed to build energyefficient buildings. This is achieved by reducing loss of heat through the buildingenvelope and to take advantage of the passive heat from solar radiation,installation and heat sources like people living in the house.This project has been made with help of Anebyhus and one of their model houseshave been examined from the report?s issues, including Anebyhus?s energyperformance, requirements for the manufacturing and assembly, how theenvelope must be improved to fulfill the requirements for the Passive House andwhat energy calculation programs are available on the market.The report aims to provide solutions for energy efficient houses that are adaptedfor production of house building.Two visits to Anebyhus has been done to study their manufacture and assemblyof building elements.