The aim of this study is to find out whether there is any difference to be found in the attention ability before and after physical activity. The method used in this study was made of an experimental design. The participants were chosen through a cluster sampling and thereafter divided into a control group and an experimental group. A total of 64 pupils from upper secondary school participated in the study, 25 of them in the experimental group and 39 of them in the control group. Since the measure was repeated, both in respect of time and the comparison between the groups, a mixed design was used.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

Horses are herbivores that spend almost all day grazing. While grazing they are infected by different endoparasites through ingestion of infective eggs or larvae on pasture. The most significant equine endoparasites in Sweden are the equine roundworm Parascaris equorum, small (Cyathostominae) and large strongyles (Strongylus spp), the tapeworm Anoplocephala perfoliata and the pinworm Oxyuris equi. For many years have horses been dewormed on regularly basis, which has resulted in the development of resistance to many anthelmintic classes. Because of the problems with resistance it is since 2007 necessary to have a prescription on anthelmintics and faecal sampling is also recommended.

The environmental monitoring in Sweden has been developed by several different parties and is now being coordinated and made more effective in order to meet the current demands on high quality information regarding the state of the environment. Sweden has been divided into five different water districts based on watershed areas because of requirements in the Water Directive of the EU. In Sweden there are two common types of environmental monitoring programs used to gather information on changes in time and in space. Currently both these two types are used for lakes in the water district of the western sea but only one is used for watersheds. The purpose of this report is to supply basic information regarding the possible need for a second environmental monitoring program for watersheds in order to better describe the spatial variation within the district as well as to determine the number of samples necessary in order to describe the district over time and space.

In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

Rift Valley Fever (RVF) is a disease caused by Rift Valley Fever virus (RVFV), which is an arbovirus. An arbovirus is a virus that is transmitted by an arthropod vector, in this case a mosquito. The virus is a member of the Phlebovirus genus in the family Bunyaviridae. It was first identified in the Rift Valley in Kenya in 1930. The disease is a zoonosis but mainly affects domestic ruminants inducing massive abortions and a high mortality among young animals.

Syftet med uppsatsen är att öka förståelsen för hur musik används i TV-reklam för att förstärka ett budskap och tala till ett visst segment. De teoretiska perspektiv som använts har hämtats från ett antal skilda områden då ämnet i sin helhet är relativt outforskat: Företagsekonomiska perspektiv: Segmenteringsteori och kommunikationsmodellen. Reklamfilmsteori: Om budskap och genre. Filmmusikalisk teori. Psykologisk teori: Hur hanterar hjärnan musik? Musikvetenskaplig teori: Musikens funktioner i TV-reklam.

Bakgrund: I och med att Basel II har instiftats i Sverige så måste finansiella institutioner beräkna sin marknadsrisk på sina portföljer. Detta kan göras genom olika VaR metoder. Dessa ger dock olika uppskattningar på marknadsrisken. De finansiella instituten får använda sig av den metod som de anser reflektera marknadsrisken bäst. Det finns dock ingen metod som utsetts till standard.Syfte: Syftet med detta arbete är att jämföra olika VaR-metoders skattning av marknadsrisken utifrån verkligt utfall, för att urskilja vilken metod som är funktionsdugligast.Avgränsningar: Denna undersökning inkluderar fyra olika VaR metoder.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

Globally, coastal ecosystems like mangrove forests, sea grass meadows and salt marshes are well known for their ability to capture and store atmospheric carbon effectively. In Sweden, there is still limited knowledge about local coastal ecosystems with similar functions, with alder swamp forests being an interesting example. Therefore, this study aimed to increase knowledge of the factors that can contribute to the potential carbon sequestering ability of alder swamps. Vegetation data and sediment samples were collected from a total of 37 sampling plots across four alder swamps in Bohusl?n on the Swedish west coast.

The objective of this work was to evaluate and compare three field methods for detection of mastitis, California Mastits Test (CMT), DeLaval cell counter DCC (DCC) and FMA2001 Farm Milk Analyzer (FMA2001). Furthermore, to investigate at what cell count level clinical symptoms of mastitis are seen, and finally to check if the clinical findings and cell counts could be related to bacteriological findings. DCC and FMA2001 are new analytic instruments to be used on dairy farms for detection of mastitis. CMT has been a widely used cow-side-test of milk quality in mastitis control efforts, but it cannot be used for estimating cell counts in scientific studies or investigations. Two hundred and eight quarter milk samples from 52 cows were analysed with DCC and CMT, and 168 of these samples with FMA2001. Microbiological examination was done on 38 milk samples with CMT scores of 4 and 5.

Heath star moss (Campylopus introflexus) is an alien species in Sweden and is currently classified as composing a "very high risk? of becoming invasive in the country according to SLU, and has in several parts of the world taken over large areas in a short time. The moss is characterized by its preference for disturbed and burned land, something that occurs on the heathland in the Sandsj?backa nature reserve, when burning for nature conservation purposes is carried out annually. Sandsj?backa's heathland is a valuable ecosystem and is one of the few heathlands in a favorable condition that remains in Sweden after strong reforms in modern agriculture in the last century, which led to forest succession of these cultural environments.

One of the main tasks of the Swedish Armed Forces over the past few years has been International assignments, which increased the importance of the Lessons Learned process. Methods of simulator training with computers have become more frequent and the technical ability to collect digital data from sensors has been developed as well. This work demonstrates how the experience of Lessons Learned can be communicated with the computer simulator StriSimPC and how modern technology in future support experiences from the Lessons Learned process at the tactical level in the Army.Currently knowledge sharing consists of several processes and strategies in the Swedish Armed Forces. This is done by written reports, oral presentations and different practical exercises.This case study shows the functions of the simulator StriSimPC, methods of training and how it is used today. The study also describes the future opportunities, where digital metadata acquired from the modern combat vehicles could contribute sharing of experience in the Lessons Learned process.The summarized conclusions indicate that StriSimPC can combine the two strategies for personalization and codification of knowledge transfer to reach a higher level of learning.

Bakgrund: Kommunikation mellan personal inom hälso- och sjukvården är viktiga faktorer för att kunna garantera patienten säker vård. Sjuksköterskan ska ha kompetens att kunna fördela och koordinera uppgifter samt ha översikt av teamarbetet. Sjuksköterskan bör ha kunskap om säkerhetsarbete för att kunna garantera säker vård. Det finns ett uttryckt behov inom vården av relevanta och tidsenliga lag- och kommunikationsövningar, där teambaserade simulatorövningar framstår som en pedagogisk och tillförlitlig inlärningsmetod. Syfte: Att beskriva vad studenter vid ett lärosäte, som utbildar sig till specialistsjuksköterskor inom intensivvård, anser om teambaserad fullskalesimulatorträning.

The project contains a force analysis of the vertical axis wind turbine Lucia's supporting arms and a measuring device to experimentally measure the forces is made. The forces between the supporting arms and the tower are calculated theoretically and then simulated by a computere. A measuring devise is then designed to measure the forces experimentally. The forces acting on the attachment between the supporting arms and the tower is primarily the centripetal force, gravitational force and the aerodynamic forces on the rotor wings. The maximum forces were theoretically calculated and is 13.38 kN along the x-axis, -0.25 kN along the y-axis and then 0.5 kN along the z-axis.