Government regulations and customs duties restrict the import of trucks to some of the markets to which Scania tries to sell their trucks. The distribution problem due to these regulations is solved by the foreign assembly department, KD, at Scania. This means that competence is needed and costs are added not related to Scania's core operations.The aim of this master thesis has been to analyse and to evaluate alternative ways of managing the packing operations considering cost, quality and work organisation. To study and examine the work methods and operations of today and also to present methods measuring the operations effectiveness and productivity.We have used the system approach to maintain totality and to understand the component's relation to this totality. Field studies combined with studies of relevant literature and studies of other companies operations have given us the knowledge and the understanding of the packing operations needed.

This study concerns mapping and analysing two different Supply Chains at Setra Group. Setra Group is Sweden?s biggest producer of solid wood and is primarily owned by Sveaskog, Mellanskog and LRF. The Company consist of twelve sawmills, five planning mills and an organisation for distribution of building material. This study maps one chain for Swedish Glulam standard beam and one chain for solid pine flooring on export to Japan. The glulam chain is based on spruce as raw material and includes all actors between sawmill and the Swedish building material retailers.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

This Master?s Thesis aims to investigate and assess the methods used to decrease the discharge ofmetals, primarily copper, from the water purification plant at Assa Industries plating factory inEskilstuna.Literature studies of the purification methods precipitation, ion exchange, evaporation, reverseosmosis and electrolysis has been done to appraise the adequacy of the technique. Thesetechniques are commonly used for purification of industrial waste water.Assa has four plating lines: the Trumline, the big Zinkline, the new Zinkline and the Decorativeline. The new Zinkline is the most modern of the four lines and purification is done byrecirculation over an ion exchange unit. The demand for fresh water is thereby heavily reduced.The Trumline, the big Zinkline and the Decorative line all use older techniques.

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

AbstractThe topic ?The effects of music in the supermarket on consumer behavior,sales, and customer state of mind? was assessed to try and analyse the emotionaldifferences that may occur as well as the sales variations that may arise fromplaying music in a supermarket. The reason for this study is that grocery storesare very common and abundant in most neighborhoods, as is man?s necessaryconsumption of food. In almost every city grocery stores must compete hardagainst each other in order to succeed in offering the most appealing options toconsumers.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

AbstractThe topic ?The effects of music in the supermarket on consumer behavior,sales, and customer state of mind? was assessed to try and analyse the emotionaldifferences that may occur as well as the sales variations that may arise fromplaying music in a supermarket. The reason for this study is that grocery storesare very common and abundant in most neighborhoods, as is man?s necessaryconsumption of food. In almost every city grocery stores must compete hardagainst each other in order to succeed in offering the most appealing options toconsumers.

The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.

Title AB Volvo Pentas packaging system ?process and packaging logisticsAuthor Peter Powell, Lund's Technical CollegeSupervisors Annika Olsson, Lund's Technical CollegeJan Svensson, AB Volvo PentaProblem - Packaging requirements ? Which requirements are there, how do they affect each other and how are they fulfilled?- Packaging process ? what is the line of action when developing new packaging and making adjustments in existing ones? Who has the responsibility to do what?- Packaging logistics ? How is the packaging system adapted to transport efficiency and handling?Objective To create an overall picture over how the packaging system affects and is affected by different functions and players within and beyond the company boundaries, to give a clear picture of how changes in the packaging system is made today and how it could work and finally to give suggestions for cost savings affected by the packaging system.Method The methods used for this thesis has mainly consisted of action research and at some extent case studies. As a previous employee at the department of logistics at Volvo Penta I?ve taken part of the environment, information and prerequisites that this thesis discusses on a daily basis. Case studies have been used for the collection and analysis of data concerning packaging logistics as I?ve chosen to consider only specific markets and packaging.Conclusions This thesis has highlighted the demands that are placed upon engine packaging throughout all concerned units and how these demands affect each other, positively and negatively.

 The purpose of this essay is to analyze and understand which difficulties that e-company's struggles with the most, and what their strategies are to overcome this problem. Sales of clothing through e-commerce have made the shopping experience faster and more comfortable, but on the other hand it has created a couple of problems which makes a big difference in the purchase of clothing, we are partly talking about the absence of the testing opportunity. To not know whether or not the shirt or pants will fit, leads customers to a game of gamble every single time they purchase a garment. Another problem which makes customers nervous before a purchase is the absence of a physical salesperson. This might lead customers to question whether or not the company exists.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

Return handling is often regarded as a slow and complex process. Studies have shown that it is not unusual for a return to cost up to nine times as much as a standard outbound delivery. An efficient return handling process is therefore essential to all competitive companies dealing with logistics. This report investigates, analyzes and gives suggestions on development with the purpose to improve the return handling process at LensLogistics AB in Kista, north of Stockholm, Sweden. The study has been conducted from a deliberately practical point of view in order to suggest improvement suggestions possible to implement and thereby change the entire return handling process.

Due to the globalization today the competition in the market has in- creased and it requires flexibility and produce according to customer demand. In order to reduce the cost of wages industrial companies are now considering moving the manufacturing to low-cost countries. To keep up with the competition in the market without moving the manu- facturing abroad, Lean Automation was developed. The concept of Lean Automation is to reduce the perceived complexity with automa- tion and make automation available for new users and in new applica- tions.Haldex Brake Products are situated in Sweden and want to maintain the manufacturing of the automatic brake adjusters in the country. It is a product well-known and highly exposed to the competition in the mar- ket.

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Sydved and the aim of the work was to investigate the economical output of removing understorey trees before first thinning. Four treatments were studied. - no cleaning before thinning - cleaning of all trees less than DBH 5 cm before thinning - cleaning of all trees less than DBH 7 cm before thinning - cleaning of all trees less then DBH 9 cm before thinning The result shows a decrease of the cost per m3 for the harvester with about 38% if all trees less than DBH 9 cm was cleaned before thinning compared with the un-cleaned area. At the same time the total net revenue increases with about 22%. .