As a consumer, you can use cards for payment more or less everywhere you go, however, it is not certain that the card can be used for all purchases. When a customer pays with card there arises a card transaction fee charged to the merchant. This is a big problem for businesses where transactions with small amounts are a large portion of sales. An observation at the beginning of this study showed that seemingly similar merchants have chosen to solve this problem in different ways. Some merchant?s refuses card purchases below a certain amount, while others accept card with any purchase.

The task of this project was to build an computer processing system for pressureregulation, in which the pressure loss over the open hydrolicvalve should be kept as low as possible. By using an cross connected proportional directional valve the valve problem could be solved. The control- and regulationproblem for the pressureregulation system was solved by using the DAQ- card NI6035E from National Instruments and the computerprogram Automatic Pressure Control 1.0 which has been software developed and written in Visual Basic. The final result showed that correct processvarible was obtained in 0,5 seconds, when the setpoint was changed in the testarea 0 - 2,5 MPa..

This study focuses on the internal marketing and how it affects the complaints by companies? communication control. Our purpose with this subject is to increase the understanding of which components affects the relation between internal marketing, communication control and complaints. We have chosen the subject, internal marketing because it caught our interest in an earlier course. On the basis of the literature of costumer complaint there have not been so much research about it and that is why we have chosen this perspective on internal marketing.This study is based on a qualitative approach.

According to the basic values of the Swedish Trotting Association the horse and its welfare should always be held in highest consideration. One part of the animal welfare work in the organization is to ensure good horse management practices by controlling all active trainers through the local licensing committees situated at the Swedish racetracks. The Swedish Board of Agriculture stated that high quality animal welfare assurance programs used by the industry organizations can be used in the risk assessment of the official animal welfare control to make the official control work more effective and the ambition of the Swedish Trotting Association is to establish an animal welfare assurance program which may be approved by the Swedish Board of Agriculture. Racehorses are exposed to welfare hazards both in their management as well as during training and racing and factors like handling, training, feedstuff, stable environment, medication and the possibility to express natural behavior all affect the welfare of the horses. The aim of the project is to investigate and evaluate the animal welfare work performed by the licensing committees and to give advice on how to improve the industry?s animal welfare control.

Detta arbete syftar huvudsakligen till att bidra med rekommendationer för hur ett system för mätning av kvalitetsbristkostnader hos ABB-enheten Control products Sweden bör upprättas. ABB:s globala riktlinjer för vad som ska mätas i ett sådant system har fungerat som utgångspunkt. I rapporten diskuteras vidare hur arbetet med mätsystemet ska upprätthållas utifrån ett ledarskapsperspektiv. I studien har en litteraturstudie legat till grund för en nulägesbeskrivning, en benchmarkingstudie, deltagande observationer och intervjuer. Rapporten innehåller också en sällsynt detaljerat beskriven kvalitetsbristkostnadsmätning som fungerar som riktmärke för enhetens fortsatta arbete med kvalitetsbristkostnader..

This report is part of the major thesis carried out at Stoneridge Electronics in Bromma,Stockholm during autumn and winter 2005-2006. The background to the thesis is the trendwithin the automotive industry where color displays have become more common for presentationof information to the driver, a trend that has come to the commercial vehicle market. Thepurpose of the thesis has been to evaluate whether programmable logic, with respect to FPGAtechnology, could be suitable for display control and graphics generation of these more complexcolor displays in automotive environment.Within the scope of the thesis the FPGA technology has been investigated, i.e. whatopportunities and threats there are with aspect to environmental and security requirements. Inaddition, the market of FPGAs and pre-built IP-cores has been investigated.

The purpose of this thesis was to describe the economic situation for popular culture venues. During the study, four different ways of financing were encountered. These are sponsorship, volunteers, government funding and ticket sales. A case study, based on interviews, were conducted on Pinkerton, a non-profit organisation. The result showed that Pinkerton needs a solid subsidy from government funding.

Background:Companies of today commonly search to gain competitive advantages throughout different forms of co-operation, one of which is referred to as Supply Chain Management. Although little research has been assigned to the topic of how to manage and control this type of relation, lately a growing number of academics has been arguing that ABC is an appropriate mean of controlling this type of relationships.Purpose:The purpose of this thesis is to investigate to what degree the ongoing debate on the use of ABC as a mean of control within SCM correspond to the present theories related to ABC and SCM respectively.Research method:The thesis takes it?s starting point within the literature, meaning that the empirical information consists of published articles in the ongoing debate. This information is put in relation to the original theories concerning both topics.Conclusions:The results shown in the thesis in some content agrees with the ongoing debate referring to the positive aspects that could result from using ABC as a mean of control within SCM. However the main result of the study is the discovery of a lack of discussion concerning the problems that implementing ABC within SCM might implicate, a fact that we believe contributes to the mainly positive view on using ABC within Supply Chain Management..

It is of increasing importance to in the most effective possible way, manage and control all the transactions of raw materials, products and information that are exchanged between an organization and all its operators. These flows and the need for strategy and managing the processes of planning, implementing and control of the supply chain, has given name to the concept supply chain management. Supply chain management involves all movement and storage of raw material, and all the processes that is needed to manufacture a product from origin to consumption. Globalization, technology and increasing time and quality-based competition are all driving forces behind the concept and reasons for an increasing interest in supply chain management.The purpose of this essay is to by using a qualitative case study examine which decisive success factors that can be identified for effective supply chain management. We have compiled different theories on the subject to use for analyzing a case study Li & Fung, who is a successful supply chain management company.

Sales Partner Group är ett Nyköpingsbaserat företag med inriktning på utbildning och rekrytering inom säljmarknaden. Företaget kontaktade Linköpings Universitet då de var i behov av en ny grafisk profil, främst då för Internet. En ny användarvänlig och dynamisk webbsajt med syftet att samla den allmänna kundgruppen, säljare samt personal på ett och samma ställe var vad som efterfrågades. Förutom att webbsajten skulle vara dynamisk och användarvänlig skulle den även vara lätt att uppdatera, erbjuda interaktivitet samt ge specifika användare en möjlighet till att kunna föra en diskussion och få tillgång till viktig information i en personlig community.Resultatet är en databasdriven webbsajt med kombinationen av HTML, CSS, PHP samt MySQL. Designen har skapats utifrån generella grundregler för användbarhet på Internet och för layout och design i allmänhet.

We have chosen to write our essay in collaboration with Varbergs kommun, where our starting point is to improve energy efficiency by management control. Their occupation separates from a pure profit driven corporation and therefore the management controls have to be adapted accordingly.  The reason why we have chosen to write an essay about the management control opportunities to improve the energy efficiency depends on two different reasons. The first reason is that we find it very interesting, how with support from the management control it is possible to improve different parts of the operation. And the second reason is that Varbergs kommun expressed a wish that they wanted to improve their energy efficiency process.The purpose of the essay is to describe and analyze the opportunities with support from the management control to help improving the process of energy efficiency in a municipal operation.

We have chosen to write our essay in collaboration with Varbergs kommun, where our starting point is to improve energy efficiency by management control. Their occupation separates from a pure profit driven corporation and therefore the management controls have to be adapted accordingly.  The reason why we have chosen to write an essay about the management control opportunities to improve the energy efficiency depends on two different reasons. The first reason is that we find it very interesting, how with support from the management control it is possible to improve different parts of the operation. And the second reason is that Varbergs kommun expressed a wish that they wanted to improve their energy efficiency process.The purpose of the essay is to describe and analyze the opportunities with support from the management control to help improving the process of energy efficiency in a municipal operation.

To get the maximal output of your exercise in gym machines, there are different factorsto be considered. For example the strength of the muscle varies dependent on the positionof the muscles. To get the best results of the exercise the load has to reduce and increaseat specific positions.This study was made in cooperation with Caretaker Scandinavia AB, a company forsales, marketing and development in health care. They are general agent for Nordic Gymwho works with manufacturing of equipment and machines for gym and fitness.The aim of this study was to generate a method of measurement to evaluate and controlthe biomechanics of Nordic Gym´s workout equipment. A protocol for an ergonomicanalysis on the equipment has also been elaborated.One of the methods to measure the biomechanics was to measure the torque through thewhole movement.

This report contains a programming improvement work in a LabVIEW? fire testing furnace control system for SP Fire Technology in Borås. Here materials and products behaviour are tested and evaluated, being exposed to fire. For this task, UGNET is being used for control and surveillance of the testing furnace system. System hardware has been updated gradually through the years, while the software has been neglected.

Bakgrund och problemdiskussion: Under årens gång har det inträffat flera företagsskandaler. Det har sett bra ut på ytan men insidan har visat motsatsen. Fasaden kollapsar till följd av bristande kontroll. Intern styrning och kontroll och COSO:s Internal Controll ? Integrated Framework blir allt mer aktuellt för att få ordning och reda.