This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

AbstractTrendanalys av rapporterade störningar vid de svenskakärnkraftverkenAnalysis of trends in reported safety-related events atSwedish nuclear power plantsSafdar KargarThis degree project was conducted at the Swedish Radiation Safety Authority (SSM)as part of the bachelors program in Nuclear Engineering at Uppsala University duringthe spring of 2011.The Swedish Radiation Safety Authority (SSM) has developed a Windows baseddatabase called ?ASKEN? during later years. In this database more than 12 000 eventreports are stored sorted in three categories, category 1, 2 and 3. The databasecontains events from the start of Oskarshamn 1 in 1972 till present time.All nuclear power plants in Sweden are obliged to report any deficiency in theirbarriers and/or the defense in depth in obedience to SSMFS 2008:1.When a failure is detected or there is reasonable suspicion of a deficiency, the eventreport should be classified as a deficiency of category -1, 2 or 3 [1].The event reports are logged and archived in the register of SSM. The SSM task forceAnalys av Störningar på elproducerande Kärnkraftverk (the ASK-group), evaluates allincoming event reports and categorizes them according to established criteria.The aim of the project is to study and analyze the event reports in the database andidentity interesting observations and trends which should be investigated morethoroughly by deeper analysis to establish any positive or negative trends of reportedevents. .

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

Investors? use borrowing as a way to profit from leverage advantages in their portfolios.When investors borrow with their securities as safety for the loan and the value of thesecurities decrease the investor can get a portfolio with more credit than what is covered bythe value of the securities and risk huge losses. To what extent an investor is allowed toborrow with his portfolio as safety depends on the bank or broker and varies between theproviders. By studying available material and in addition to that making an empirical study Iattempt to find out the reason for the varying degrees of leverage possibilities between thebrokers and how the degree of maximum borrowing on the securities are decided. Thefindings show that decision of leverage degree on a security is made after first making aquantitative analysis of the stocks volatility and liquidity and thereafter make a qualitativeanalysis of the company.

Studies have shown that stress is common in the nursing profession.Purpose: The aim was to investigate nurses' experience of stress in the work environment at the University Hospital in Uppsala and how nurses deal with this stress and whether the perceived stress experienced affect patient safety and in what way. Method: The study had a descriptive, qualitative design based on nine interviews. The selection criteria for the study was that participants were nurses and that they had worked at least one year within the profession and that they had experienced stress in their work environment. Data from the interviews was analyzed using the qualitative content analysis method by Graneheim and Lundman. Results: The analysis resulted in three categories: "Stress in the workplace?, "stress management" and "patient safety? and showed that all participants had experienced stress repeatedly in their workplaces.

What affect if an incident is reported?- an interview study with nursesABSTRACTEveryday in health care, there are incidents which can harm patients. However, reporting these incidents is not always a positive experience. The number of incident reports which are documented are a lot fewer than the number of incidents that actually occur. The purpose of the present study was to describe factors that affect nurses? decisions on whether to report an incident or not.

Passagerarna behöver mera tid än säkerhetsinformation eftersom passagerarna har så bråttom att komma ombord, boka bord och handla tax-free. Därmed missar passagerarna viktig säkerhetsinformation som alltid ges vid avgång via fartygets högtalarsystem. Det finns klar och tydlig säkerhetsinformation ombord. Det viktiga är sättet att ge information än att ge mera information. Idag informeras passagerarna via videoskärmar, utrymningskartor på hyttdörrar, via högtalarsystemet ombord, säkerhetsbroschyrer i hytter och information, välutbildad besättning och det är väl skyltat ombord.

Report of diploma work conducted at the Swedish Radiation Safety Authority (SSM) as part of the bachelors program in Nuclear Engineering at Uppsala University.All nuclear power plants in Sweden are obliged to report any deficiency in their barriers or the defense in depth in obedience to SSM?s regulations concerning safety in nuclear facilities. In addition, there is an international system for reporting such events. The purpose of this thesis is to study the Swedish report system and to analyze the differences between Swedish and international event reporting.In the Swedish system, SSM?s regulations are effectuated by means of event reports classified as category 1-3, designed individually at each Swedish facility.

What affect if an incident is reported?- an interview study with nursesABSTRACTEveryday in health care, there are incidents which can harm patients. However, reporting these incidents is not always a positive experience. The number of incident reports which are documented are a lot fewer than the number of incidents that actually occur. The purpose of the present study was to describe factors that affect nurses? decisions on whether to report an incident or not.

How accessible is the city? Is there more factors than merely the strictly physical that affect how accessible the city is perceived? These questions are the starting point of this study. The greatest emphasis, in this study, is placed on the perceived parameters that affect us humans when we move in our cities. Experiences and internal images can change our behaviour and prevent free movement in the city. The result from this study shows that a city can not be seen as fully accessible unless both the physical and the perceived accessibility are fulfilled.

Cardiovascular disease is the leading cause of death in the Western world. For persons who have had a myocardial infarction the following rehabilitation and the group training, which is a part of this, are very important. The cardiac rehabilitation is designed to limit the physiological and psychological effects of cardiovascular disease. Purpose: This study aimed to examine how patients with cardiovascular disease experienced group training in relation to the International Classification of Function, Disability and Health, ICF. Method: A qualitative interview study was performed according to Malterud, inspired by the Grounded Theory method.

Human - Technology - Organization (HTO) is a well-established, general unifying concept in the Swedish Accident Investigation Authority (SHK) that represents an approach, knowledge and use of various tools regarding interactions between people, technology and organizational factors. The HTO-perspective is well described in literature but there are few studies on how SHKs staff experiences working according to this method in their investigations. The aim of this study was therefore to describe their HTO-perspective, examine how it is used in the investigations at SHK and describe the investigators experience of working with the HTO-perspective as well as the method's usefulness compared to old methods in accident investigations. A literature study has been conducted in the areas of HTO, Theory of planned behavior (TPB) and safety culture. TPB and safety culture are described in this paper since they highlight the different aspects of a HTO-perspective.

This diploma work was conducted in collaboration with the Swedish civil engineeringconstruction company Skanska Construction in Stockholm. Their interest is todevelop a number of type approved form constructions which can be used during theconstruction of concrete walls. Skanska focuses on improving safety on their projectsand both supervisors and workers have a need for approved form constructions inthe current situation.The study is focused on safety and the purpose is to facilitate the preparation beforethe form work can begin. By studying the literature of the subject and conductinterviews with employees at Skanska Construction, the understanding of the issueand knowledge will be increased.Literature studies, interviews together with production and design have been thebasis for a successful study. The work has resulted in three types of approved formconstructions to Skanska Construction and the drawings can be used of employees atthe company.

Small companies have fewer resources which often result in an tendency to disregard  administrative tasks. A factor that influences the company?s revenues is the control of its inventories. The purpose of the current study was to analyze which of the two options, leasing or owning your inventory, that could be justified from an economical perspective. Furthermore, the purpose was to describe the optimal inventory level for each option. To meet these objectives representatives for the company was interviewed and a thorough investigation process was undertaken, during which methodological problems were solved.  It was found that leasing the inventory was the most expensive option for the company. Analysis demonstrated that optimal turnover inventory according to EOQ (Economic Order Quantity) would amount to 65,0 thousand Swedish Krona if the company leases their inventory in comparison to 56,0 thousand Swedish Krona if the company owned their inventory.

Swedish healthcare systems have endured harsh criticism from healthcare professionals because of their inability to understand healthcare processes. These systems have been identified as significant time consumers, and Swedish healthcare is therefore facing a major challenge to assure patient safety. The following paper is based on a workplace study, which aims to examine healthcare systems? impact on physicians? practices. Our findings show that physicians spend substantial amounts of time chasing information, rather than managing information and pursuing healthcare.